Fast Intentions exhaust is here! (continued)

Luciano13 · 11-07-2013, 06:18 PM

Quote:

Originally Posted by johncarlopang

bro, i heard clips of diff exhaust for 370z. thats why im asking nice what makes him top of the notch

and this

Super Werty · 11-07-2013, 06:36 PM

Where you on jackstands in the last vid?

ZForce · 11-08-2013, 01:41 PM

Hey Tony, I am getting rattling from the difuser. Does it look like the exhaust fitment is right? I have the EVO-R difuser.

wackjum · 11-08-2013, 01:50 PM

I would say it is too close. Needs a little bit of a gap. You will need to add some washers to each of the screws on the hanging bracket.

ZForce · 11-08-2013, 02:13 PM

^ Thanks, my mechanic was thinking the same. Just checking with the guru - Tony to ensure we do not have to disassemble the entire exhaust system and start over. We did follow the instructions.

F.I. Inc. · 11-08-2013, 02:20 PM

Quote:

Originally Posted by ZForce

^ Thanks, my mechanic was thinking the same. Just checking with the guru - Tony to ensure we do not have to disassemble the entire exhaust system and start over. We did follow the instructions.

You need to space the tips down to create clearance between the top of them and the diffuser. It should not take much. There is no need to loosen the exhaust system to do this.

Thanks, Tony

ZForce · 11-08-2013, 03:00 PM

Quote:

Originally Posted by F.I. Inc.

You need to space the tips down to create clearance between the top of them and the diffuser. It should not take much. There is no need to loosen the exhaust system to do this.

Thanks, Tony

Thanks Tony

Luciano13 · 11-08-2013, 03:06 PM

Quote:

Originally Posted by Super Werty

Where you on jackstands in the last vid?

no no it wAS on a dyno. because of the body kit with no spacers, they had to slightly lift the one side so it wouldn't rub

Rangerz · 11-08-2013, 09:54 PM

FYI everyone tracking ypor systems. #835 shipped today

I will install it Tuesday night when it arrives.

wackjum · 11-08-2013, 10:21 PM

Quote:

Originally Posted by Rangerz

FYI everyone tracking ypor systems. #835 shipped today

I will install it Tuesday night when it arrives.

#836 buddy.

Mine shipped too.

NORAIN · 11-09-2013, 07:45 AM

Thanks for the updates.

exsanity · 11-13-2013, 03:19 AM

How do you know what number your system is down the list?

F.I. Inc. · 11-13-2013, 03:40 AM

Quote:

Originally Posted by exsanity

How do you know what number your system is down the list?

On your invoice under PO I put your build number. Right side of the invoice about 1/3 of the way down.

Thanks, Tony

exsanity · 11-13-2013, 04:44 AM

#884!
Got it, wewt!

Rangerz · 11-17-2013, 03:19 AM

This is a little video of a lap out at Miller Motor Sports park today. Raining with periods of snow falling this morning with a few breaks in the weather.

The event is run as a one lap time attack with two groups alternating every 30 min. We had 2 morning practice sessions then after lunch 2 afternoon sessions to determine the winners for each group. It was allot of fun but, you really had to tip toe around to keep from sliding out. The run on the video was of the driest of the day and the spin at the end was from my first practice session.

I just installed the Fast Intentions HFC's and a 12" resonated TDX with the CF cans. I can honestly say that I had the best sounding exhaust today. While I'm sure others are good as well I have this one so it's the best

Thought this would give you guys yet another video to listen to while you wait for your systems.

11-07-2013, 06:36 PM	#3062 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 13	Where you on jackstands in the last vid? __________________ The Build

11-08-2013, 01:50 PM	#3064 (permalink)
wackjum Base Member Join Date: Apr 2012 Location: Houston Posts: 89 Drives: 2004 Porsche 911 T Rep Power: 13	I would say it is too close. Needs a little bit of a gap. You will need to add some washers to each of the screws on the hanging bracket. ZForce likes this.

11-08-2013, 09:54 PM	#3069 (permalink)
Rangerz Enthusiast Member Join Date: Jun 2013 Location: Northern Utah Age: 59 Posts: 476 Drives: 2012 370 Nismo Rep Power: 12	FYI everyone tracking ypor systems. #835 shipped today I will install it Tuesday night when it arrives. ZForce and jlw2546 like this. __________________ Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY

11-13-2013, 03:19 AM	#3072 (permalink)
exsanity Premium Member Join Date: Oct 2013 Location: Middle Tennessee Posts: 10,499 Drives: you mad.. Rep Power: 3700	How do you know what number your system is down the list? __________________ \| F.I. NonRes Carbon CBE \| F.I. High Flow Cats \| Hotchkis Sway Bars \| KW Variant 3 \| SPL Suspension Parts \|

11-13-2013, 04:44 AM	#3074 (permalink)
exsanity Premium Member Join Date: Oct 2013 Location: Middle Tennessee Posts: 10,499 Drives: you mad.. Rep Power: 3700	#884! Got it, wewt! __________________ \| F.I. NonRes Carbon CBE \| F.I. High Flow Cats \| Hotchkis Sway Bars \| KW Variant 3 \| SPL Suspension Parts \|

11-08-2013, 01:41 PM	#3063 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Hey Tony, I am getting rattling from the difuser. Does it look like the exhaust fitment is right? I have the EVO-R difuser.

11-08-2013, 02:13 PM	#3065 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	^ Thanks, my mechanic was thinking the same. Just checking with the guru - Tony to ensure we do not have to disassemble the entire exhaust system and start over. We did follow the instructions.

11-09-2013, 07:45 AM	#3071 (permalink)
NORAIN Enthusiast Member Join Date: Jun 2013 Location: Wilmington, NC Age: 57 Posts: 323 Drives: 2011 370Z 6M SP Rep Power: 12	Thanks for the updates.

11-17-2013, 03:19 AM	#3075 (permalink)
Rangerz Enthusiast Member Join Date: Jun 2013 Location: Northern Utah Age: 59 Posts: 476 Drives: 2012 370 Nismo Rep Power: 12	This is a little video of a lap out at Miller Motor Sports park today. Raining with periods of snow falling this morning with a few breaks in the weather. The event is run as a one lap time attack with two groups alternating every 30 min. We had 2 morning practice sessions then after lunch 2 afternoon sessions to determine the winners for each group. It was allot of fun but, you really had to tip toe around to keep from sliding out. The run on the video was of the driest of the day and the spin at the end was from my first practice session. I just installed the Fast Intentions HFC's and a 12" resonated TDX with the CF cans. I can honestly say that I had the best sounding exhaust today. While I'm sure others are good as well I have this one so it's the best Thought this would give you guys yet another video to listen to while you wait for your systems. F.I. Inc., Felix 808, raymondo510 and 1 others like this. __________________ Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 03:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 04:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 08:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 07:25 PM