Akuma Motorports 370z Intake

Kevin@AkumaMS · 07-21-2012, 10:29 AM

- Yes we of course want people to get excited about them, but what is more important is seeing how they are designed and the process it takes which is why this thread was started in the first place. We like to educate the community in anyway possible. You just dont see that enough and it is even more important for the customers and supporters to understand how everything is working and that these decisions were made with good reasoning behind it

-Kevin@Akuma

Kevin@AkumaMS · 07-21-2012, 10:45 AM

They will fit the nizmo and theres no need for a template because it requires just minimal trimming

-Kevin@Akuma

370Z Purist · 07-21-2012, 10:39 PM

Quote:

Originally Posted by Kevin@AkumaMS

Thats just brushed aluminum which is what we'll offer them in

-Kevin@Akuma

So let me get this right, you're selling them as brushed aluminum? I'm guessing that is for reasons concerning cost? I'm fine with brushed aluminum, it's not a big deal, again, mostly an aesthetic sort of thing. I've always been big on the shiny aluminum pipes inside the engine bay.

Quote:

Originally Posted by XwChriswX

Will there be any chance in Ordering a set to get them Powdercoated? And will the Black silicone connectors be the only colors offered?

Just asking purely for aesthetic ideas... The kit looks great, really liking the single pipes with as little cutting as necessary.

I'm guessing these filters will need the same cleaning necessary for the K&N Drop ins, every 3-5k?

Perhaps Z1 will carry these and offer to powdercoat them to buyers.

Cleaning the filters would depend on where you live. Dusty places near deserts obviously more so than cleaner air like ... in places where the air is cleaner.

Kevin@AkumaMS · 07-25-2012, 03:25 PM

Yes brushed aluminum is what we offer them in. For now we will have to leave the powdercoating up to the customer however in the future who knows

-Kevin@Akuma

XwChriswX · 07-26-2012, 02:13 AM

Quote:

Originally Posted by Kevin@AkumaMS

Yes brushed aluminum is what we offer them in. For now we will have to leave the powdercoating up to the customer however in the future who knows

-Kevin@Akuma

Can we get some more detailed pics of how the brushed aluminum looks? (When completely installed?)

I'm assuming it will hold up to the elements/fingerprints/scratches alright?

AkumaMS · 07-26-2012, 08:04 AM

The intakes will be offered in polished or powdercoated. The brushed is only for the first few sets I am putting together here. We typically go with gloss black. Depending on the demand we may do a special run of Dormant Purple or another color. Perhaps we will put up a poll on what you guys want. We have a set going in a car next week.

We should be taking deposits this week and shipping the polished or powder coated final units with in a few weeks. I have a place in Cali that does our bending so it will depend on his schedule. We have the filters and couplers in stock so the full roll out should go very smoothly.

Sorry for the spotty info and lengthy roll out, but I just want to be sure we have the very best product possible. I am really stoked about this kit, and I think you guys will love them when you get them.

I should have some pick of our prototype Rear Diff Cooler kit this evening as well. That is also going to be a cool kit. 4" fan(sealed), thermostatically controlled pump, no drilling or removal of the rear diff required.... but first thing first, we need to get the intakes out to you guys...lol

Cheers!

-John

Alchemy · 07-26-2012, 08:11 AM

Just wondering where in NJ you guys are located??

AkumaMS · 07-26-2012, 08:15 AM

Quote:

Originally Posted by 370Z Purist

So let me get this right, you're selling them as brushed aluminum? I'm guessing that is for reasons concerning cost? I'm fine with brushed aluminum, it's not a big deal, again, mostly an aesthetic sort of thing. I've always been big on the shiny aluminum pipes inside the engine bay.

Perhaps Z1 will carry these and offer to powdercoat them to buyers.

Cleaning the filters would depend on where you live. Dusty places near deserts obviously more so than cleaner air like ... in places where the air is cleaner.

Z1 will be getting a set for them to mess around with.

We want their input as a dealer as well. The guys over there are very cool and have a good business going, so if all works out and they like the kits, I think they would be an amazing asset.

The brushed is just a finish I really like. They are easily cared for and no need to worry about scratches...just use a 3M pad and she is good to go. Having said that, we will offer polished or p-coat in the final run. I personally opt for the brushed, as I like that finish, but it may not be for everyone. I actually first saw the brushed finish from a company in the Subaru market, and thought it was pretty cool...not really a cost related thing as the other finishes are not really expensive. The custom color runs can be a little bit, but definitely doable.

Here are some pics of our EVO X pipe kit that we did in colors....

This was our EVO kit release..the brushed here is not what you would get now....that was a few steps unfinished, but you get the idea...... AKUMA MOTORSPORTS full intercooler kit/intake review thread - evolutionm.net

|samu · 07-26-2012, 08:48 AM

At this cost, just go FI

AkumaMS · 07-26-2012, 11:27 AM

That makes no sense at all.... FI? You are talking about $500 versus 8-10K for FI. Silly comparo...lol

Kevin@AkumaMS · 07-26-2012, 11:31 AM

We are located on 2 Amboy Ave, Woodbridge, NJ

lemon-fresh · 07-26-2012, 11:33 AM

Quote:

Originally Posted by |samu

At this cost, just go FI

Probably a good idea to not troll the sponsors.

Alchemy · 07-26-2012, 12:33 PM

Quote:

Originally Posted by Kevin@AkumaMS

We are located on 2 Amboy Ave, Woodbridge, NJ

not too far from where I work.

Kevin@AkumaMS · 07-26-2012, 01:52 PM

Quote:

Originally Posted by Alchemy

not too far from where I work.

Come stop by and check out the shop sometime!

Alchemy · 07-26-2012, 02:06 PM

Quote:

Originally Posted by Kevin@AkumaMS

Come stop by and check out the shop sometime!

I just may

07-26-2012, 08:04 AM	#171 (permalink)
AkumaMS Base Member Join Date: Apr 2012 Location: NY/NJ Posts: 99 Drives: EVOX Rep Power: 13	The intakes will be offered in polished or powdercoated. The brushed is only for the first few sets I am putting together here. We typically go with gloss black. Depending on the demand we may do a special run of Dormant Purple or another color. Perhaps we will put up a poll on what you guys want. We have a set going in a car next week. We should be taking deposits this week and shipping the polished or powder coated final units with in a few weeks. I have a place in Cali that does our bending so it will depend on his schedule. We have the filters and couplers in stock so the full roll out should go very smoothly. Sorry for the spotty info and lengthy roll out, but I just want to be sure we have the very best product possible. I am really stoked about this kit, and I think you guys will love them when you get them. I should have some pick of our prototype Rear Diff Cooler kit this evening as well. That is also going to be a cool kit. 4" fan(sealed), thermostatically controlled pump, no drilling or removal of the rear diff required.... but first thing first, we need to get the intakes out to you guys...lol Cheers! -John __________________ John Shafer Owner/Calibrator Akuma Motorsports LLC http://t1.gstatic.com/images?q=tbn:A...ncVpndgs-nSyng

07-26-2012, 08:11 AM	#172 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Just wondering where in NJ you guys are located?? __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

07-26-2012, 11:27 AM	#175 (permalink)
AkumaMS Base Member Join Date: Apr 2012 Location: NY/NJ Posts: 99 Drives: EVOX Rep Power: 13	That makes no sense at all.... FI? You are talking about $500 versus 8-10K for FI. Silly comparo...lol __________________ John Shafer Owner/Calibrator Akuma Motorsports LLC http://t1.gstatic.com/images?q=tbn:A...ncVpndgs-nSyng

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Akuma Dyno Tuned 370z	Kevin@AkumaMS	Nissan 370Z Photos / Spyshots / Video / Media Gallery	11	05-28-2012 05:50 PM
Akuma Motorsports	Kevin@AkumaMS	New Forum Member	1	05-19-2012 05:25 PM
GTM Motorports Installer in Melbourne?	GUTCH	Australia/New Zealand	7	07-19-2010 03:17 AM
GTM Motorports Website	GUTCH	Forced Induction	7	07-02-2010 10:57 AM
Akuma Z'ed - PG Z34	JunoonX	Member's 370Z Gallery	19	05-26-2009 07:15 PM

07-21-2012, 10:29 AM	#166 (permalink)
Kevin@AkumaMS Base Member Join Date: May 2012 Location: New Jersey Posts: 136 Drives: 01 Suby 2.5RS Rep Power: 13	- Yes we of course want people to get excited about them, but what is more important is seeing how they are designed and the process it takes which is why this thread was started in the first place. We like to educate the community in anyway possible. You just dont see that enough and it is even more important for the customers and supporters to understand how everything is working and that these decisions were made with good reasoning behind it -Kevin@Akuma

07-21-2012, 10:45 AM	#167 (permalink)
Kevin@AkumaMS Base Member Join Date: May 2012 Location: New Jersey Posts: 136 Drives: 01 Suby 2.5RS Rep Power: 13	They will fit the nizmo and theres no need for a template because it requires just minimal trimming -Kevin@Akuma

07-25-2012, 03:25 PM	#169 (permalink)
Kevin@AkumaMS Base Member Join Date: May 2012 Location: New Jersey Posts: 136 Drives: 01 Suby 2.5RS Rep Power: 13	Yes brushed aluminum is what we offer them in. For now we will have to leave the powdercoating up to the customer however in the future who knows -Kevin@Akuma

07-26-2012, 08:48 AM	#174 (permalink)
\|samu Banned Join Date: Jul 2012 Location: Minot Posts: 69 Drives: NISMO T Rep Power: 0	At this cost, just go FI

07-26-2012, 11:31 AM	#176 (permalink)
Kevin@AkumaMS Base Member Join Date: May 2012 Location: New Jersey Posts: 136 Drives: 01 Suby 2.5RS Rep Power: 13	We are located on 2 Amboy Ave, Woodbridge, NJ