NEW AAM Competition Short Tail Ti-Tip Exhaust Pre-Order Deal

Adam@AAMComp · 05-30-2012, 05:16 PM

Quote:

Originally Posted by ZForce

Adam, could the shorties bolt up to a Nismo S-Tune CBE?

The S-Tune I believe is 3" diameter all the way back to the muffler. Need confirmation on this...

The shorties from the description on your website is "Built from 304 stainless steel, the S-Line Short Tails feature 2.5 inch pipes from the flanges to the 4 inch diameter polished stainless exhaust tips".

AAM Competition - Nissan GT-R, 370Z Turbo Performance Specialists

Sorry for the delayed response but this is meant to only bolt to a factory Base Model, Sport and Convertible stock exhaust. It is just a muffler delete. I am not sure if it will fit the Nismo but I do know it will look very out of place on the Nismo rear bumper.

-Adam

Also we do not have any dyno numbers for this exhaust.

shaun66 · 06-02-2012, 04:55 PM

Quick question about the studs that connect the muffler and the mid-pipe. Are they stuck on the mid-pipe or do they come out? Does that make sense?? lol

Dre_d85 · 06-05-2012, 04:09 PM

Do you have any sound clips of these on your shop's Z? you did mention that the sound changed from the regular tip short tails. I would like to hear it before going placing the order.

Adam@AAMComp · 06-05-2012, 04:21 PM

I will try and get the clip but it sounded the same once the intakes were installed on Randy's vehicle.

-Adam

Dre_d85 · 06-05-2012, 04:24 PM

Quote:

Originally Posted by Adam@AAMComp

I will try and get the clip but it sounded the same once the intakes were installed on Randy's vehicle.

-Adam

Perfect let me know as soon as you get that clip. I was ready to buy it, but I read your post on the sound being different.

370Z Purist · 06-06-2012, 11:42 AM

Quote:

Originally Posted by Dre_d85

Perfect let me know as soon as you get that clip. I was ready to buy it, but I read your post on the sound being different.

I don't see how they would be different. Only the tips are titanium, otherwise even this tiny axleback would cost much more than 600 dollars. Should sound the same as the SS model.

Quote:

Originally Posted by Adam@AAMComp

Also we do not have any dyno numbers for this exhaust.

As for dyno numbers, I'd guess a very modest gain of under 4 hp and similar tq gains. The muffler section may be restrictive but the best gain from these would be the weight loss or the sound. No giant, ~35 pound can in the rear. Unless you popped off the Y pipe, changed the OEM cats, or just got a full catback, not much to see in power gain.

I would love these Ti tips, very tastefully done. Unfortunately, I work on a terrible, monthly paycheck. Just spent my most recent one on some test pipes and other miscellaneous needs for living.

At 450 a pop for inhouse manufacturing and engineering, this is an absolute steal. I guess I'll have to ante up 600 when these are actually retailed. Great job. You guys at AAM are doing great work.

Huckleberry · 06-06-2012, 05:19 PM

Pre-ordered mine about a week or so ago, just curious if there's been any shipping updates

370Z Purist · 06-06-2012, 05:56 PM

Quote:

Originally Posted by Adam@AAMComp

Hey guys we are looking about 4 weeks from tomorrow it would ship. As there finished it will ship. But right now if I had to put a date on it 4 to 5 weeks until you would have them. From today's date! The day I get these tips this price is going up by close to 100 bucks.

-Adam

Sounds like a week's time left.

Huckleberry · 06-06-2012, 05:57 PM

hope that's true.

can't wait to put these on!

Dre_d85 · 06-07-2012, 10:08 AM

Should be mid July...

Adam@AAMComp · 06-07-2012, 10:32 AM

We are just waiting for our shipment to leave the manufacture. We ordered a LARGE amount and they didn't have enough to fulfill the order. It is a big change as the tip design is totally different. The S/S one is a rolled tip this is a double roll basically and doesn't trumpet as much. Hard to describe but I will post pics of when they are here side by side to a S/S one. Also we are crazy backed up in production right now also which isn't a bad thing so to speak as the guys have plenty of work but it is bad for me in sales telling you guys about wait time

.

http://vimeo.com/43606299 Go Pro Vid will be available after 11:30am est

-Adam

ZForce · 06-10-2012, 03:24 AM

Quote:

Originally Posted by Adam@AAMComp

Sorry for the delayed response but this is meant to only bolt to a factory Base Model, Sport and Convertible stock exhaust. It is just a muffler delete. I am not sure if it will fit the Nismo but I do know it will look very out of place on the Nismo rear bumper.

-Adam

Also we do not have any dyno numbers for this exhaust.

Thanks, and just for clarification, I have a 370Z sport touring NOT the Nismo model. What I do have is the S-tune CBE.

Huckleberry · 06-11-2012, 03:06 PM

Quote:

Originally Posted by Adam@AAMComp

We are just waiting for our shipment to leave the manufacture. We ordered a LARGE amount and they didn't have enough to fulfill the order. It is a big change as the tip design is totally different. The S/S one is a rolled tip this is a double roll basically and doesn't trumpet as much. Hard to describe but I will post pics of when they are here side by side to a S/S one. Also we are crazy backed up in production right now also which isn't a bad thing so to speak as the guys have plenty of work but it is bad for me in sales telling you guys about wait time

.

AAM Competition 370Z S-Line Short Tail Exhaust : Titanium on Vimeo Go Pro Vid will be available after 11:30am est

-Adam

any time table yet? looking to install these soon.

Adam@AAMComp · 06-11-2012, 03:32 PM

We are waiting for shipping confirmation. Once that is known it takes about a week or so to get to us as long as there are no hiccups along the way then we can start to produce.

-Adam

Reaper42 · 06-11-2012, 05:37 PM

Too bad you cant custom fabricate these to fit up to fast intentions exhaust. Id buy them in a heart beat

06-05-2012, 04:21 PM	#34 (permalink)
Adam@AAMComp Base Member Join Date: Feb 2012 Location: Annapolis Junction, MD Posts: 183 Drives: 09 GT-R Rep Power: 13	I will try and get the clip but it sounded the same once the intakes were installed on Randy's vehicle. -Adam __________________ Adam Correia AAM Competition AdamC@AAMCompetition.com AAM Competition Stage I Power Package

06-06-2012, 05:19 PM	#37 (permalink)
Huckleberry Enthusiast Member Join Date: Apr 2012 Location: Los Angeles Age: 39 Posts: 410 Drives: Z Rep Power: 13	Pre-ordered mine about a week or so ago, just curious if there's been any shipping updates __________________

06-06-2012, 05:57 PM	#39 (permalink)
Huckleberry Enthusiast Member Join Date: Apr 2012 Location: Los Angeles Age: 39 Posts: 410 Drives: Z Rep Power: 13	hope that's true. can't wait to put these on! __________________

06-07-2012, 10:32 AM	#41 (permalink)
Adam@AAMComp Base Member Join Date: Feb 2012 Location: Annapolis Junction, MD Posts: 183 Drives: 09 GT-R Rep Power: 13	We are just waiting for our shipment to leave the manufacture. We ordered a LARGE amount and they didn't have enough to fulfill the order. It is a big change as the tip design is totally different. The S/S one is a rolled tip this is a double roll basically and doesn't trumpet as much. Hard to describe but I will post pics of when they are here side by side to a S/S one. Also we are crazy backed up in production right now also which isn't a bad thing so to speak as the guys have plenty of work but it is bad for me in sales telling you guys about wait time . http://vimeo.com/43606299 Go Pro Vid will be available after 11:30am est -Adam __________________ Adam Correia AAM Competition AdamC@AAMCompetition.com AAM Competition Stage I Power Package

06-11-2012, 03:32 PM	#44 (permalink)
Adam@AAMComp Base Member Join Date: Feb 2012 Location: Annapolis Junction, MD Posts: 183 Drives: 09 GT-R Rep Power: 13	We are waiting for shipping confirmation. Once that is known it takes about a week or so to get to us as long as there are no hiccups along the way then we can start to produce. -Adam __________________ Adam Correia AAM Competition AdamC@AAMCompetition.com AAM Competition Stage I Power Package

06-02-2012, 04:55 PM	#32 (permalink)
shaun66 Track Member Join Date: Mar 2010 Location: n Posts: 837 Drives: MB 370z 7AT Rep Power: 16	Quick question about the studs that connect the muffler and the mid-pipe. Are they stuck on the mid-pipe or do they come out? Does that make sense?? lol

06-05-2012, 04:09 PM	#33 (permalink)
Dre_d85 Base Member Join Date: May 2012 Location: Miami Posts: 122 Drives: Nissan 370z 2012 Rep Power: 13	Do you have any sound clips of these on your shop's Z? you did mention that the sound changed from the regular tip short tails. I would like to hear it before going placing the order.

06-07-2012, 10:08 AM	#40 (permalink)
Dre_d85 Base Member Join Date: May 2012 Location: Miami Posts: 122 Drives: Nissan 370z 2012 Rep Power: 13	Should be mid July...

06-11-2012, 05:37 PM	#45 (permalink)
Reaper42 A True Z Fanatic Join Date: May 2009 Location: Chicago, IL Posts: 1,030 Drives: GetLucky370 Rep Power: 18	Too bad you cant custom fabricate these to fit up to fast intentions exhaust. Id buy them in a heart beat __________________ Sponsor roll call: Get Lucky Brand \| TOYO TIRES \| Element Graphics \| Unique Fabrication Follow on fb- Jon Sackett and Instagram @GetLucky370 GetLucky370

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAM Competition Short Tail Exhaust DIY	leeyeegue	DIY Section (Do-It-Yourself)	27	08-03-2018 10:08 AM
NEW AAM Competition Short Tail Ti-Tip Exhaust Pre-Order Deal	Adam@AAMComp	AAM Competition	0	05-17-2012 12:10 PM
NEW AAM Competition Short Tail Ti-Tip Exhaust!	Adam@AAMComp	Intake/Exhaust	11	05-16-2012 09:25 AM
NEW AAM Competition Short Tail Ti-Tip Exhaust!	Adam@AAMComp	AAM Competition	3	05-10-2012 03:44 PM
[WTB] AAM Competition S-Line Short Tail Exhaust	shizzl3s	Parts for sale (Private Classifieds)	11	03-09-2012 07:38 PM