HFC install time

lemon-fresh · 05-16-2012, 05:43 PM

I'm taking my 370 into the mechanic to have Berk HFCs installed. How long should I expect the install to take? Thanks!

Baer383 · 05-16-2012, 05:58 PM

About 1 hour,that is all it took me.

seymore4 · 05-16-2012, 07:07 PM

DIY it man it's not hard, for the money they're gonna charge you you can afford a Ballin set I tools too

check out an uprev tune next to bring it to life!

tjlazer · 05-16-2012, 07:11 PM

Took me 6 hours. Search "Demon bolt" LOL

Alstann · 05-17-2012, 12:15 AM

Quote:

Originally Posted by seymore4

DIY it man it's not hard, for the money they're gonna charge you you can afford a Ballin set I tools too

check out an uprev tune next to bring it to life!

I agree. It's an awesome excuse to get a whole 1/2 inch drive set and various tools. You'll save a good amount of money. Demon bolts or not. ^^

seymore4 · 05-17-2012, 12:22 AM

Is it a pain in the ***? Yes. Is it fun? No. But fawk man a shops gonna charge you at least $150 to do it and for that money you can afford to spend pretty
Much a whole day busting it out

lemon-fresh · 05-17-2012, 11:45 AM

Thx for the replies, I've read so many demon bolt stories on here that I really dont want to bother with it. No lift/jacks, no tools also...

Think I might hold off on the uprev for now since this is only the beginning. Im thinking the mod path is gonna be exhaust, pulleys, maf tubes and filters then uprev. If I can find a friend who has some decent tools and a lift will probably do the rest myself.

SS_Firehawk · 05-17-2012, 01:04 PM

LTH's = demon bolt bypass with demon sound screaming from the rear :P NVM... Headers are even worse with a Demon driver side where bolts break & strip, and knuckles are looking like they were in a fight.

All joking aside, you can buy some ramps for $40 and the tools required for well under the install price. If they don't know about the bolt, or are unprepared, it's your pocket that will be feeling the pain. So if you do do it with a shop, try and get the price set in stone.

lemon-fresh · 05-17-2012, 01:11 PM

hrmmmmm... I'm feeling less and less confident with my decision. Might start making some calls and putting together a list of tools I'd need. Can you guys help me out with that?

lemon-fresh · 05-17-2012, 01:23 PM

After taking a look at the DIY section I'm not sure buying all the tools will save me money, might in the long term tho.

SS_Firehawk · 05-17-2012, 01:41 PM

I was real F'n lucky to only pay $400 for my LTH and CBE install. Sometimes you can find the right shop to get it done on the cheap.

vividracing · 05-17-2012, 03:18 PM

Most shops are going to charge about 2 hours of labor. That's assuming the "Demon Bolt" doesn't rear it's ugly head.

lemon-fresh · 05-17-2012, 03:22 PM

My friend with all the tools (and know how) has agreed to help me out this weekend, hopefully the demon bolt doesn't pose too much of a threat.

lemon-fresh · 05-22-2012, 11:13 AM

Faced the demon bolt this weekend, 2 hours later we decided to try turning it the opposite way and snapped the fucker off. Bolting everything back up took about 30 minutes lol.

Whole process was pretty fun, I'll be installing z1 maf tubes and filters this week hopefully.

Have another question, what kind of sound(s) would indicate an exhaust leak?

SS_Firehawk · 05-22-2012, 12:39 PM

LOL, CG's on the job. Mine is still connected to the stock header in my garage. I just stare at it triumphantly occasionally. With regards to an exhaust leak, it sounds like ticking within the exhaust note from the location of the leak.

05-16-2012, 05:43 PM	#1 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	HFC install time I'm taking my 370 into the mechanic to have Berk HFCs installed. How long should I expect the install to take? Thanks!

05-16-2012, 05:58 PM	#2 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	About 1 hour,that is all it took me. __________________ 2013 ZL1 754 rwhp 747 rwtq

05-16-2012, 07:11 PM	#4 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Took me 6 hours. Search "Demon bolt" LOL __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

05-17-2012, 11:45 AM	#7 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	Thx for the replies, I've read so many demon bolt stories on here that I really dont want to bother with it. No lift/jacks, no tools also... Think I might hold off on the uprev for now since this is only the beginning. Im thinking the mod path is gonna be exhaust, pulleys, maf tubes and filters then uprev. If I can find a friend who has some decent tools and a lift will probably do the rest myself. Last edited by lemon-fresh; 05-17-2012 at 11:51 AM.

05-17-2012, 01:04 PM	#8 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	LTH's = demon bolt bypass with demon sound screaming from the rear :P NVM... Headers are even worse with a Demon driver side where bolts break & strip, and knuckles are looking like they were in a fight. All joking aside, you can buy some ramps for $40 and the tools required for well under the install price. If they don't know about the bolt, or are unprepared, it's your pocket that will be feeling the pain. So if you do do it with a shop, try and get the price set in stone. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

05-16-2012, 07:07 PM	#3 (permalink)
seymore4 Track Member Join Date: Nov 2010 Location: West coast Age: 41 Posts: 556 Drives: 2010 nismo Rep Power: 6727	DIY it man it's not hard, for the money they're gonna charge you you can afford a Ballin set I tools too check out an uprev tune next to bring it to life!

05-17-2012, 12:22 AM	#6 (permalink)
seymore4 Track Member Join Date: Nov 2010 Location: West coast Age: 41 Posts: 556 Drives: 2010 nismo Rep Power: 6727	Is it a pain in the ***? Yes. Is it fun? No. But fawk man a shops gonna charge you at least $150 to do it and for that money you can afford to spend pretty Much a whole day busting it out

05-17-2012, 01:11 PM	#9 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	hrmmmmm... I'm feeling less and less confident with my decision. Might start making some calls and putting together a list of tools I'd need. Can you guys help me out with that?

05-17-2012, 01:23 PM	#10 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	After taking a look at the DIY section I'm not sure buying all the tools will save me money, might in the long term tho.

05-17-2012, 01:41 PM	#11 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	I was real F'n lucky to only pay $400 for my LTH and CBE install. Sometimes you can find the right shop to get it done on the cheap. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

05-17-2012, 03:18 PM	#12 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 38 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 39	Most shops are going to charge about 2 hours of labor. That's assuming the "Demon Bolt" doesn't rear it's ugly head. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

05-17-2012, 03:22 PM	#13 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	My friend with all the tools (and know how) has agreed to help me out this weekend, hopefully the demon bolt doesn't pose too much of a threat.

05-22-2012, 11:13 AM	#14 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	Faced the demon bolt this weekend, 2 hours later we decided to try turning it the opposite way and snapped the fucker off. Bolting everything back up took about 30 minutes lol. Whole process was pretty fun, I'll be installing z1 maf tubes and filters this week hopefully. Have another question, what kind of sound(s) would indicate an exhaust leak? Last edited by lemon-fresh; 05-22-2012 at 11:23 AM.

05-22-2012, 12:39 PM	#15 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	LOL, CG's on the job. Mine is still connected to the stock header in my garage. I just stare at it triumphantly occasionally. With regards to an exhaust leak, it sounds like ticking within the exhaust note from the location of the leak. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
first time poster, long time reader	gvd	Introduction	5	06-30-2010 03:14 PM
Does anyone's transmission clunk from time to time when pushing the clutch in??	chitown1863	Engine & Drivetrain	21	04-13-2010 09:22 AM
Long time Lurker...first time poster	cuzzinz	New Forum Member	5	01-26-2010 02:24 PM
Install complete ( Finally ) Item list, Cost, Time	355890	Audio & Video	11	06-29-2009 12:14 AM
First time owner - long time admirer	ZCarGo	New 370Z Owner	15	03-20-2009 03:25 PM