Fast Intentions 3" (Twin Turbo) exhaust is here!

F.I. Inc. · 05-14-2012, 12:40 AM

5/13/2012

First off we would like to thank the following people & shops who participated and helped launch this project.

RON: You kept on me to create this system for you and brought enough people to the table to justify putting it in to production.
Sebastian@SpecialtyZ: Thank you for loaning us your car to perfect the GTM version.
Andrew@UAM: Thank you for loaning us the NISMO to perfect the Greddy version.

This exhaust system is the same design as our 2.5" TDX version. Though the design was already perfected bringing this exhaust to reality was a little more complicated than it's predecessor. Maximizing ground clearance was a big concern for us. We knew going into this project that getting the front of the mufflers tucked up as high as possible was a top priority. After weeks of hard work and dedication we were able to achieve our goal and perfect this system.

We wanted to try something that had never been done before. We wanted to appeal to as many people as possible regardless of what brand they have. We understand that Twin Turbo kits are a lot of money. It is the kind of investment that when you commit to it you most likely will never change it. So this is why our Fast Intentions 3" TDX will be compatible in the following applications:

1) Fast Intentions Twin Turbo Kit (Release Summer 2012)
2) GTM Twin Turbo Kit
3) Greddy Twin Turbo Kit
This exhaust is not compatible for a Supercharged on Naturally Aspirated application!

Options

Standard: Stainless Steel muffler exhaust (54 pounds: 3 pounds lighter than stock.)

Option#1: (Additional Charge) 100 Cell Metallic High Flow Cats. These cats will virtually cut out the "raw fuel smell" while any sacrifice in performance will be very minimal. You will also decrease your overall decibel level. (56 pounds: 1 pound lighter than stock.)

Option#2: (Additional Charge) 2,000 Degree Black Ceramic coated mufflers. Yes the temperature rating is slightly excessive but the durability of this coating is unrivaled! Aside of it's durability, it's aesthetics can be quite appealing to whoever is going for that look.

After doing extensive testing we have opted not to have a resonated X Pipe option. With your Turbochargers acting as primary mufflers we feel the resonators are not needed. In terms of overall decibel level, the exhaust is very practical and not overbearing in the slightest.

Fast Intentions 3" TT-TDX...

Above: Shown with (GTM) Lead Pipes, 100 Cell Metallic High Flow Cats & Black Ceramic mufflers.

Above: Greddy underside Down Pipe to exhaust connection.

Above: Greddy Lead Pipes

Above: GTM Lead Pipes

Above: Back of X Pipe view looking forward.

Above: Shown with "Black Ceramic" mufflers. (Optional)

Above: Shown on a NISMO W/1" extended tips to streamline rear valance. Polished Stainless Steel Mufflers. (Standard)

Above: Shown base model rear ground view.

Above: Shown base model "above"rear view.

Above: NISMO rear view

[I

Above: Base model rear left angle.

Above: NISMO rear left angle.

Here is where the current list stands:

Ron-GTM: 001 (Installed)
Dembflyr-GTM: 002 (Installed)
Elliotty-GTM: 003 (Installed)
chuck33079-GTM: 004 (In transit)
UAM-Greddy: 005 (Installed)
roplusbee-Greddy: 006 (Delivered)

Video and ordering information below:

We will launch the sale thread for this with pricing in the Vendor Classified section shortly. Anyone that is interested in pricing and availability please do not hesitate to either pm me, email or call me directly. All of my contact information is located at the bottom.

Our ordering process will work the same as always. All of our systems are hand built right here in house. They are constructed and shipped on a first come, first serve basis. When you place an order all that we require is a $300 deposit. We do not charge the remaining balance until your exhaust is ready to ship. Your order will come with new hardware, gaskets and detailed installation instructions. This exhaust will bolt right up to your current Twin Turbo kit and should not require and cutting welding or modifying at all! As soon as your order does ship, we will email your tracking number to you. Our lead times always increase/decrease with product demand. These lead times can be rather large year round due to our products being in high demand. To rectify the large lead times we are moving in to our new 7,500 sq ft. facility. We will be up and fully operational July 1st. In time after the transition I am confident that we can give you the same great quality while reducing lead times.

We look forward to giving the Z community another great product from F.I. Inc. Stay tuned for more updates in this thread and new products being released this summer!

Thank you all as always.

Tony

sz34 · 05-14-2012, 12:44 AM

Huck · 05-14-2012, 01:19 AM

Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg

Sent from my iPhizzle using magic and new fangled science stuff

EZT · 05-14-2012, 01:22 AM

Awesome news Tony! Although I have the N/A 2.5" setup, the turbo setup should be in my future for the Z. Great work!

Jamaica · 05-14-2012, 01:31 AM

Congrats Tony. The Greddy car made great power with your exhaust. We appreciate your help!

Viera · 05-14-2012, 01:50 AM

It really is wonderful to see how far you guys have made it. Keep up the great work Tony and the rest of the F.I. crew

ZMan8 · 05-14-2012, 02:06 AM

Quote:

Originally Posted by Viera

It really is wonderful to see how far you guys have made it. Keep up the great work Tony and the rest of the F.I. crew

Sent from my SAMSUNG-SGH-I897 using Tapatalk 2

MacLean · 05-14-2012, 02:31 AM

Very nice pics.....

Boost_lee · 05-14-2012, 04:01 AM

What can I say, looks great. Nice job on the NISMO tip option too.

jpritche · 05-14-2012, 06:20 AM

Looks great Tony!

G37Sam · 05-14-2012, 08:08 AM

Allow me to initiate the leg humping

Great work as always Tony, can't wait to hear video's of this thing

Ron · 05-14-2012, 08:45 AM

Quote:

Originally Posted by Boost_lee

What can I say, looks great. Nice job on the NISMO tip option too.

my idea

KaienZ34 · 05-14-2012, 09:37 AM

Dembflyr · 05-14-2012, 09:49 AM

Thanks again Tony! (and Ron)

As soon as I have some time, I'll get some videos together to add to the collection.

Huan'z · 05-14-2012, 10:12 AM

Damn! U made it tony! Congratulation on 3" setup!!! Wonderful!! This setup with gtm turbo is in my list!!

Wait so for us with 2.5" all we need just a 100 cell 3" right? Can't wait for the videos!

Sent from my iPhone using Tapatalk

Huan Huynh.

05-14-2012, 12:40 AM	#1 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 685	Fast Intentions 3" (Twin Turbo) exhaust is here! *5/13/2012* First off we would like to thank the following people & shops who participated and helped launch this project. RON: You kept on me to create this system for you and brought enough people to the table to justify putting it in to production. Sebastian@SpecialtyZ: Thank you for loaning us your car to perfect the GTM version. Andrew@UAM: Thank you for loaning us the NISMO to perfect the Greddy version. This exhaust system is the same design as our 2.5" TDX version. Though the design was already perfected bringing this exhaust to reality was a little more complicated than it's predecessor. Maximizing ground clearance was a big concern for us. We knew going into this project that getting the front of the mufflers tucked up as high as possible was a top priority. After weeks of hard work and dedication we were able to achieve our goal and perfect this system. We wanted to try something that had never been done before. We wanted to appeal to as many people as possible regardless of what brand they have. We understand that Twin Turbo kits are a lot of money. It is the kind of investment that when you commit to it you most likely will never change it. So this is why our Fast Intentions 3" TDX will be compatible in the following applications: 1) Fast Intentions Twin Turbo Kit (Release Summer 2012) 2) GTM Twin Turbo Kit 3) Greddy Twin Turbo Kit *This exhaust is not compatible for a Supercharged on Naturally Aspirated application!* *Options* Standard: Stainless Steel muffler exhaust (54 pounds: 3 pounds lighter than stock.) *Option#1:* (Additional Charge) 100 Cell Metallic High Flow Cats. These cats will virtually cut out the "raw fuel smell" while any sacrifice in performance will be very minimal. You will also decrease your overall decibel level. (56 pounds: 1 pound lighter than stock.) *Option#2:* (Additional Charge) 2,000 Degree Black Ceramic coated mufflers. Yes the temperature rating is slightly excessive but the durability of this coating is unrivaled! Aside of it's durability, it's aesthetics can be quite appealing to whoever is going for that look. After doing extensive testing we have opted not to have a resonated X Pipe option. With your Turbochargers acting as primary mufflers we feel the resonators are not needed. In terms of overall decibel level, the exhaust is very practical and not overbearing in the slightest. *Fast Intentions 3" TT-TDX...* *Above:* *Shown with (GTM) Lead Pipes, 100 Cell Metallic High Flow Cats & Black Ceramic mufflers.* *Above:* *Greddy underside Down Pipe to exhaust connection.* *Above: Greddy Lead Pipes* *Above: GTM Lead Pipes* *Above: Back of X Pipe view looking forward.* *Above: Shown with "Black Ceramic" mufflers. (Optional)* *Above: Shown on a NISMO W/1" extended tips to streamline rear valance. Polished Stainless Steel Mufflers. (Standard)* *Above: Shown base model rear ground view.* *Above: Shown base model "above"rear view.* *Above: NISMO rear view* [I *Above: Base model rear left angle.* *Above: NISMO rear left angle.* *Here is where the current list stands:* Ron-GTM: 001 (Installed) Dembflyr-GTM: 002 (Installed) Elliotty-GTM: 003 (Installed) chuck33079-GTM: 004 (In transit) UAM-Greddy: 005 (Installed) roplusbee-Greddy: 006 (Delivered) *Video and ordering information below:* We will launch the sale thread for this with pricing in the Vendor Classified section shortly. Anyone that is interested in pricing and availability please do not hesitate to either pm me, email or call me directly. All of my contact information is located at the bottom. Our ordering process will work the same as always. All of our systems are hand built right here in house. They are constructed and shipped on a first come, first serve basis. When you place an order all that we require is a $300 deposit. We do not charge the remaining balance until your exhaust is ready to ship. Your order will come with new hardware, gaskets and detailed installation instructions. This exhaust will bolt right up to your current Twin Turbo kit and should not require and cutting welding or modifying at all! As soon as your order does ship, we will email your tracking number to you. Our lead times always increase/decrease with product demand. These lead times can be rather large year round due to our products being in high demand. To rectify the large lead times we are moving in to our new 7,500 sq ft. facility. We will be up and fully operational July 1st. In time after the transition I am confident that we can give you the same great quality while reducing lead times. We look forward to giving the Z community another great product from F.I. Inc. Stay tuned for more updates in this thread and new products being released this summer! Thank you all as always. Tony COSMO likes this. __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION" Last edited by F.I. Inc.; 01-21-2013 at 09:58 PM.

05-14-2012, 12:44 AM	#2 (permalink)
sz34 Base Member Join Date: Jul 2011 Location: Northridge, CA Posts: 119 Drives: 09 370z Pg 6mt Rep Power: 14	__________________ Fast Intentions

05-14-2012, 01:19 AM	#3 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg omg Sent from my iPhizzle using magic and new fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

05-14-2012, 01:50 AM	#6 (permalink)
Viera Track Member Join Date: Feb 2009 Location: Atlanta, GA Posts: 897 Drives: '09 M.Blue 370Z 6MT Rep Power: 264	It really is wonderful to see how far you guys have made it. Keep up the great work Tony and the rest of the F.I. crew __________________ Fast Intentions / VarrsToen / Stillen / BC Racing / SPC / K&N / Project Kics / Hankook / Morimoto / JDM Rear Fog

05-14-2012, 04:01 AM	#9 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	What can I say, looks great. Nice job on the NISMO tip option too. __________________ My TT Z

05-14-2012, 01:22 AM	#4 (permalink)
EZT Track Member Join Date: Mar 2011 Location: Gainesville Posts: 546 Drives: 09 370z Rep Power: 315	Awesome news Tony! Although I have the N/A 2.5" setup, the turbo setup should be in my future for the Z. Great work!

05-14-2012, 01:31 AM	#5 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Congrats Tony. The Greddy car made great power with your exhaust. We appreciate your help!

05-14-2012, 02:31 AM	#8 (permalink)
MacLean A True Z Fanatic Join Date: Apr 2012 Location: Houston Posts: 1,589 Drives: '12 GM Nismo # 0445 Rep Power: 16	Very nice pics.....

05-14-2012, 06:20 AM	#10 (permalink)
jpritche A True Z Fanatic Join Date: Oct 2010 Location: Cartersville, Ga Age: 32 Posts: 2,570 Drives: '15 RR, '14 IS250 Rep Power: 31	Looks great Tony!

05-14-2012, 08:08 AM	#11 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 21	Allow me to initiate the leg humping Great work as always Tony, can't wait to hear video's of this thing __________________ '14 Viper GTS '08 RB'd G37S - Sold

05-14-2012, 09:37 AM	#13 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	__________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

05-14-2012, 09:49 AM	#14 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	Thanks again Tony! (and Ron) As soon as I have some time, I'll get some videos together to add to the collection. F.I. Inc. likes this. __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

05-14-2012, 10:12 AM	#15 (permalink)
Huan'z Track Member Join Date: Apr 2010 Location: houston,texas Posts: 641 Drives: black 370z 7/AT. Rep Power: 16	Damn! U made it tony! Congratulation on 3" setup!!! Wonderful!! This setup with gtm turbo is in my list!! Wait so for us with 2.5" all we need just a 100 cell 3" right? Can't wait for the videos! Sent from my iPhone using Tapatalk Huan Huynh.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SOLD: Fast Intentions 18" Exhaust - $700	Boost_lee	Parts for sale (Private Classifieds)	19	03-19-2012 01:13 AM
[FOR SALE] Fast Intentions TDX Exhaust 12" Res. Plus Berk HFC	GNEU	Parts for sale (Private Classifieds)	21	02-27-2012 08:32 PM
FS: Fast Intentions Exhaust, 18" Resonators	cotizi	Parts for sale (Private Classifieds)	7	01-31-2011 10:53 PM
TW: 18" SS Fast Intentions Exhaust	6spd	Parts for sale (Private Classifieds)	25	10-07-2010 02:22 PM
Fast Intentions SS exhaust with 12" Resonators	370zFORme!!	Parts for sale (Private Classifieds)	12	06-15-2010 09:58 PM