CNT H-pipe Issue

harman.khinda · 05-02-2012, 11:01 PM

Did an inventory got 5/6 gaskets and 10/12 bolts but that's not a big problem.

The H pipe came in two pieces, one side has slits and the other doesn't. The side with the slits is barely larger but the two pieces don't fit together and there is no clamp included. Am I supposed to just jam(deform) these two pieces together and not clamp them? They couldn't have forgot to weld these two pieces together, could they?

Staples · 05-02-2012, 11:24 PM

From what this picture shows (CNT's website) you just jam the two ends together to form the "H". It probably would have been a better idea to include a clamp with it to reduce the possibility of a leak.

chrischhorn · 05-02-2012, 11:48 PM

LOL another CNT exhaust issue......mine came with a clamp to clamp em together........ but i had other issues........ =/ take a picture of your mid pipe. i wanna see if yours is screwed up like mine was. Don't bother contacting them cause they will just tell you to go to Autozone and buy a clamp yourself or they might have to go and get it for you.

harman.khinda · 05-03-2012, 09:28 AM

The thing is they don't jam together; I'd have to widen/flare-out the piece with the slits to have it fit over the other side. Instead of a clamp would it be better to weld the H-pipe together once its on the car?

I'll have pics of my mid-pipe up. One of my mufflers also has a dent/ding from shipping. This exhaust has been out for a while; they should've had all these issues sorted out by now.

fuct · 05-03-2012, 09:45 AM

wow that looks like crap!!! i had no idea the two pipes are inserted like that. so they are worried the flanges wont line up and go with this design to compensate. crap....

CNT res TP's broken!

chrischhorn · 05-03-2012, 10:48 AM

You would think so but lookin through their thread, a lot of people have had different issues. Though still issues. Seems like they have ZERO quality control at all. They probably realize on each piece what they screwed up but send it out anyways! This is the issue with my mid pipe.

This is the bracket that does not belong! They welded it on the wrong side and only HALFWAY fixed it. Its cut already cause me and another member on here cut it ourselves cause this piece was rubbin on the driveshaft after the HFC install.....

why do i say they halfway fixed it? Cause if you look at the red squares on this one, they grinded down the mis-weld and cleaned it up already. I noticed it before i installed but didnt think anything of it.

Since we are here, heres what ERZ (aka CNT) sent me when i told them i was missing bolts.

Dear chrischhorn,

I don't have any extra and would have to go to home depot and buy it. But I think it will save you more time if you go get it yourleft. Just normal screw.

Thank you

- erzperformance

Click "respond" to reply through Messages, or go to your email to reply
Respond

From: chrischhorn
To: erzperformance
Subject: Other: chrischhorn sent a message about CNT RACING 09-11 Nissan 370z Bolt on catback Exhaust system #300610254638
Sent Date: Apr-18-12 07:22:14 PDT

Dear erzperformance,

Hi i just received your exhaust and put all of it on and come to realize that it is missing the screws that hold on the adjustable tips. Any way that you can get those sent out to me?

- chrischhorn

edub370 · 05-03-2012, 10:58 AM

ya they had an issue with one of the brackets in the center. just remove it. IIRC correctly there are 4 brackets, so just cut the one rubbing off. yes the center piece is a very tight fit, but it just takes spreading the cutpieces out a little then it slides right over.

harman.khinda · 05-03-2012, 02:39 PM

^ okay that makes sense. seems like a crappy design since it would only really fit tight the first time.

harman.khinda · 05-03-2012, 04:51 PM

hey chrischhorn, I got the same issue with the mid-pipe. It's easy to make the assumption ERZ is knowingly shipping "bolt-on" exhausts that require modification to fit; and that they can't be bothered to replace the missing bits and pieces.

fuct · 05-03-2012, 05:16 PM

maybe we can rename this thread the "you get what you paid for" thread.

harman.khinda · 05-03-2012, 06:41 PM

^ its alright budget has to meet performance somewhere for me. Probably why I don't have a nismo.

SPOHN · 05-03-2012, 06:58 PM

Quote:

Originally Posted by fuct

wow that looks like crap!!! i had no idea the two pipes are inserted like that. so they are worried the flanges wont line up and go with this design to compensate. crap....

CNT res TP's broken!

harman.khinda · 05-03-2012, 07:45 PM

Quote:

Originally Posted by edub370

ya they had an issue with one of the brackets in the center. just remove it. IIRC correctly there are 4 brackets, so just cut the one rubbing off. yes the center piece is a very tight fit, but it just takes spreading the cutpieces out a little then it slides right over.

what can I use to spread the pieces?

MacLean · 05-03-2012, 08:24 PM

WOW......... Man I am sorry this happen to you. I'm surprised they sent you the exhaust even though they messed up on the welding. I would be pissed too. You would think that one would not receive damaged goods especially from welding.

edub370 · 05-03-2012, 09:13 PM

i feel like the only person that didnt have a problem with putting this exhaust on

05-02-2012, 11:24 PM	#2 (permalink)
Staples Track Member Join Date: Sep 2010 Location: Baltimore, MD Posts: 546 Drives: '08 Infiniti G37s Rep Power: 16	From what this picture shows (CNT's website) you just jam the two ends together to form the "H". It probably would have been a better idea to include a clamp with it to reduce the possibility of a leak. __________________ '08 Infiniti G37s - Forced Induction Fed

05-02-2012, 11:48 PM	#3 (permalink)
chrischhorn A True Z Fanatic Join Date: Jan 2012 Location: Mililani, HI Posts: 1,566 Drives: 2014 Juke Nismo RS Rep Power: 16	LOL another CNT exhaust issue......mine came with a clamp to clamp em together........ but i had other issues........ =/ take a picture of your mid pipe. i wanna see if yours is screwed up like mine was. Don't bother contacting them cause they will just tell you to go to Autozone and buy a clamp yourself or they might have to go and get it for you. Last edited by chrischhorn; 05-02-2012 at 11:54 PM.

05-03-2012, 09:28 AM	#4 (permalink)
harman.khinda Enthusiast Member Join Date: Feb 2012 Location: Red Bluff, CA Posts: 378 Drives: 10 Nissan 370 PG 7AT Rep Power: 6723	The thing is they don't jam together; I'd have to widen/flare-out the piece with the slits to have it fit over the other side. Instead of a clamp would it be better to weld the H-pipe together once its on the car? I'll have pics of my mid-pipe up. One of my mufflers also has a dent/ding from shipping. This exhaust has been out for a while; they should've had all these issues sorted out by now. Last edited by harman.khinda; 05-03-2012 at 09:42 AM.

05-03-2012, 10:48 AM	#6 (permalink)
chrischhorn A True Z Fanatic Join Date: Jan 2012 Location: Mililani, HI Posts: 1,566 Drives: 2014 Juke Nismo RS Rep Power: 16	You would think so but lookin through their thread, a lot of people have had different issues. Though still issues. Seems like they have ZERO quality control at all. They probably realize on each piece what they screwed up but send it out anyways! This is the issue with my mid pipe. This is the bracket that does not belong! They welded it on the wrong side and only HALFWAY fixed it. Its cut already cause me and another member on here cut it ourselves cause this piece was rubbin on the driveshaft after the HFC install..... why do i say they halfway fixed it? Cause if you look at the red squares on this one, they grinded down the mis-weld and cleaned it up already. I noticed it before i installed but didnt think anything of it. Since we are here, heres what ERZ (aka CNT) sent me when i told them i was missing bolts. Dear chrischhorn, I don't have any extra and would have to go to home depot and buy it. But I think it will save you more time if you go get it yourleft. Just normal screw. Thank you - erzperformance Click "respond" to reply through Messages, or go to your email to reply Respond From: chrischhorn To: erzperformance Subject: Other: chrischhorn sent a message about CNT RACING 09-11 Nissan 370z Bolt on catback Exhaust system #300610254638 Sent Date: Apr-18-12 07:22:14 PDT Dear erzperformance, Hi i just received your exhaust and put all of it on and come to realize that it is missing the screws that hold on the adjustable tips. Any way that you can get those sent out to me? - chrischhorn Last edited by chrischhorn; 05-03-2012 at 10:55 AM.

05-03-2012, 10:58 AM	#7 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	ya they had an issue with one of the brackets in the center. just remove it. IIRC correctly there are 4 brackets, so just cut the one rubbing off. yes the center piece is a very tight fit, but it just takes spreading the cutpieces out a little then it slides right over. __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

05-03-2012, 09:45 AM	#5 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	wow that looks like crap!!! i had no idea the two pipes are inserted like that. so they are worried the flanges wont line up and go with this design to compensate. crap.... CNT res TP's broken!

05-03-2012, 02:39 PM	#8 (permalink)
harman.khinda Enthusiast Member Join Date: Feb 2012 Location: Red Bluff, CA Posts: 378 Drives: 10 Nissan 370 PG 7AT Rep Power: 6723	^ okay that makes sense. seems like a crappy design since it would only really fit tight the first time.

05-03-2012, 05:16 PM	#10 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	maybe we can rename this thread the "you get what you paid for" thread.

05-03-2012, 06:41 PM	#11 (permalink)
harman.khinda Enthusiast Member Join Date: Feb 2012 Location: Red Bluff, CA Posts: 378 Drives: 10 Nissan 370 PG 7AT Rep Power: 6723	^ its alright budget has to meet performance somewhere for me. Probably why I don't have a nismo.

05-03-2012, 08:24 PM	#14 (permalink)
MacLean A True Z Fanatic Join Date: Apr 2012 Location: Houston Posts: 1,589 Drives: '12 GM Nismo # 0445 Rep Power: 16	WOW......... Man I am sorry this happen to you. I'm surprised they sent you the exhaust even though they messed up on the welding. I would be pissed too. You would think that one would not receive damaged goods especially from welding.

05-03-2012, 09:13 PM	#15 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	i feel like the only person that didnt have a problem with putting this exhaust on __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEW: Megan Racing Y-Pipe, Mid-Pipe, Axlebacks! Best Prices + Free S&H!!	AJ@ECSMotorsports	Exhaust/Intake	30	01-24-2016 01:15 PM
*MXP 370z Test Pipe SUPER SALE* \| Resonated and Straight Pipe	SE	Exhaust/Intake	10	04-17-2012 06:33 PM
Ebay test-pipe and y-pipe combo	harman.khinda	Intake/Exhaust	6	02-13-2012 09:43 PM
Tanabe y pipe vs motordyne y pipe help me choose please	zuperman 370	Intake/Exhaust	14	01-30-2012 11:48 PM
Help CNT Racing Test Pipe Install Issue	fairladyZ34	Intake/Exhaust	14	04-18-2011 03:28 PM