Greddy Evap Bracket Dimension

zakimak · 04-12-2012, 09:33 PM

Hey All

I purchased a TI-C exhaust from a fellow member who sold his car and when I recieved the exhaust, the bracket that holds the Evap unit is missing. I would like to fab the unit but need the exact dimension for the following per picture below:

A) Total Length - 22 1/4"
B) Width - 6 7/8"
C) On center bolt hole from edge hole to center hole 10 1/8"
D) width of small bracket 2"
E) On center between mounting bolt - 5 3/4"

Any help is appreciated

Major thanks in advance... Ended up making this

Staples · 04-12-2012, 09:40 PM

If you can't get the dimensions, I would try and get in touch with Greddy / Trust. They're located in California and could get you the part.

zakimak · 04-12-2012, 09:47 PM

Thanks Staples...That would be my next bet but being in Ottawa, it would take a while to get it in and I really want to install the exhaust this weekend. I am decent with a welder so I figure I make one.

Lude_conduct · 04-12-2012, 10:25 PM

scottnismo is who I sold my exhaust to, good luck. He should be able to get those.

zakimak · 04-12-2012, 10:30 PM

Quote:

Originally Posted by Lude_conduct

scottnismo is who I sold my exhaust to, good luck. He should be able to get those.

thanks lude .. I've just PMed him

Staples · 04-13-2012, 01:27 AM

Oh, well in that case, good luck!

zakimak · 08-01-2012, 10:19 AM

I ended up making this. The center bracket was made that way because I didn't know the exact location of the bolt holding the EVAP unit. It was fab when the car was being wet sanded by the dealer.

04-12-2012, 09:33 PM	#1 (permalink)
zakimak 6/2/80 - 9/29/14 - RIP Lukas Join Date: Jun 2011 Location: Ottawa, Ontario Posts: 450 Drives: ZR; Q45; VTR1K, GT65 Rep Power: 17	Greddy Evap Bracket Dimension Hey All I purchased a TI-C exhaust from a fellow member who sold his car and when I recieved the exhaust, the bracket that holds the Evap unit is missing. I would like to fab the unit but need the exact dimension for the following per picture below: A) Total Length - 22 1/4" B) Width - 6 7/8" C) On center bolt hole from edge hole to center hole 10 1/8" D) width of small bracket 2" E) On center between mounting bolt - 5 3/4" Any help is appreciated Major thanks in advance... Ended up making this __________________ What doesn't kill you might make you a cripple so chose wisely. Free Stuff for Premium Members - Yeah Really Last edited by zakimak; 08-01-2012 at 10:28 AM. Reason: Added picture of one I fab to help others

04-12-2012, 09:40 PM	#2 (permalink)
Staples Track Member Join Date: Sep 2010 Location: Baltimore, MD Posts: 546 Drives: '08 Infiniti G37s Rep Power: 16	If you can't get the dimensions, I would try and get in touch with Greddy / Trust. They're located in California and could get you the part. __________________ '08 Infiniti G37s - Forced Induction Fed

04-12-2012, 09:47 PM	#3 (permalink)
zakimak 6/2/80 - 9/29/14 - RIP Lukas Join Date: Jun 2011 Location: Ottawa, Ontario Posts: 450 Drives: ZR; Q45; VTR1K, GT65 Rep Power: 17	Thanks Staples...That would be my next bet but being in Ottawa, it would take a while to get it in and I really want to install the exhaust this weekend. I am decent with a welder so I figure I make one. __________________ What doesn't kill you might make you a cripple so chose wisely. Free Stuff for Premium Members - Yeah Really

04-13-2012, 01:27 AM	#6 (permalink)
Staples Track Member Join Date: Sep 2010 Location: Baltimore, MD Posts: 546 Drives: '08 Infiniti G37s Rep Power: 16	Oh, well in that case, good luck! __________________ '08 Infiniti G37s - Forced Induction Fed

08-01-2012, 10:19 AM	#7 (permalink)
zakimak 6/2/80 - 9/29/14 - RIP Lukas Join Date: Jun 2011 Location: Ottawa, Ontario Posts: 450 Drives: ZR; Q45; VTR1K, GT65 Rep Power: 17	I ended up making this. The center bracket was made that way because I didn't know the exact location of the bolt holding the EVAP unit. It was fab when the car was being wet sanded by the dealer. __________________ What doesn't kill you might make you a cripple so chose wisely. Free Stuff for Premium Members - Yeah Really

04-12-2012, 10:25 PM	#4 (permalink)
Lude_conduct Base Member Join Date: Oct 2010 Location: GA Posts: 35 Drives: z34 Rep Power: 15	scottnismo is who I sold my exhaust to, good luck. He should be able to get those.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 370z evap 2009	L33T Z34	Parts for sale (Private Classifieds)	3	09-22-2013 01:48 PM
Removing EVAP Conister	SPOHN	Intake/Exhaust	2	02-01-2012 08:40 PM
Greddy Turbo TI-C or Greddy Spectrum Elite?	Andy124	Intake/Exhaust	32	06-05-2011 03:34 PM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Forced Induction	2	07-17-2010 06:57 AM
Tsb: 1998-later all nissan models; evap leak dtc diagnosis	AK370Z	370Z Technical Service Bulletins (TSB) / Recalls	0	02-08-2010 10:58 PM