After Gen 3 Install: Window Problems
 

Excuse me if this is in the wrong section.

Yesterday I installed my Stillen Gen 3's and I followed AK370z's DIY install.

http://www.the370z.com/diy-section-d...de-ak370z.html

It was great btw! After reconnecting the battery cable I noticed that my windows no longer automatically go up. Also when I open the door and the windows drop a little, they don't go back up. So if I open and close my door repeatedly, the window will eventually be all the way down.

Has anyone had this problem? Am I going to need to take it to the dealership?

No search for the window reset procedure.

It's easy. Takes about 10 seconds

I installed my g3s over the weekend and had the same problem...
Easy fix

Reset your windows. Roll your window all the way down and hold down the window switch for 5 seconds and then roll it back all the way up and hold up the switch for another 5 seconds. That should get your windows back to normal operation. Do the same for the other side.

Yea I installed mine this weekend also and just reset the windows after. Color matched gen 3s look sick!

Thanks guys. I guess I could have searched. My bad

Yea I painted mine red.

http://img.tapatalk.com/44188321-9588-86b8.jpg

Wow, i wish the window reset was that easy on the 350 :(

completed. works fine. mods can lock/close. do what you gotta do

Windows are easy fix. Although one time when the battery was disconnected and reconnected the car stopped making the beep unlock and lock sound so took it back to dealer and the ended up fixing.