Very disappointing low dyno numbers please help!!!!!!!

Mandingo · 03-10-2012, 03:01 AM

Run that tank of gas through and get the highest octane rating you can (91 is the highest there?) from a station that you know to have quality gas.

Then dyno in 5th gear.

I recently filled up with nonamebrand 91 octane from a grocery store to use up our 'gas reward points'

Bad idea. My car bogged down off the line and just generally felt unhealthy until I diluted the tank with some 93 octane.

ZKraken22 · 03-10-2012, 10:05 AM

I would go get it dynoed by another company just Because. Yea I would be very upset to you should be making 320 wrhp at least. Something has to be wrong. But next step I would do if I were you is get a tune.

zuperman 370 · 03-10-2012, 10:28 AM

thats why i got so disappointed, but i will do that, get it dynoed at some other place as well as put fuel from a cleaner station before i get it tuned.

MaDMaXX · 03-10-2012, 11:10 PM

1) Drag strip will tell you nothing of power, if i can race a WRX with 300WHP and make the same MPH at the end of the quarter when i'm in a stock 2001 mustang, what does that tell you?

It's all driver and grip levels, remember the stang is RWD and the WRX is AWD.

2) Don't expect much from bolt ons with recent/modern cars, they work their way around the parts as best they can, the tune is what allows them to work.

Get it tuned, you can't whine until then.

zuperman 370 · 03-11-2012, 03:24 AM

i understand that is correct, i will get it tuned next but still expected better numbers at least 290 pre tuned

Presto · 03-11-2012, 05:40 AM

what is the highest grade of fuel available in your country?

zuperman 370 · 03-11-2012, 08:28 AM

Quote:

Originally Posted by Presto

what is the highest grade of fuel available in your country?

They claim it's 91, but everyone says it's far less than 91 perhaps close to 89

MaDMaXX · 03-11-2012, 01:16 PM

You have to understand that the ECU will not change like the OBDI systems did, so you can't get that kind of increase pre tune. OBDII was brought in to be stricter and make the engine try and get back to the factory state. I understand that these newer versions of OBDII are even more so this way, very hard to change the overall running.

OBDI only adapted to the situation, so an easier breathing filter, it would put in more fuel for example.

ODBII, would see the easier breathing, but try and tune it's self in order that it didn't put more fuel through than it's original design was told.

Basically, you're expecting too much, it won't happen, the tunes are needed these days more than ever because they change the mind of the ECU as to what they should be doing.

370Z JT · 03-11-2012, 02:16 PM

I don't think you're expecting too much. +8 hp gain pretune is not normal for the mods you have. I think the problem is the dyno and/or engine.

zuperman 370 · 03-11-2012, 02:21 PM

I think its the dyno I will have it dynoed in an hours time and have numbers posted

chops · 03-11-2012, 04:22 PM

im surprised no one has said this yet...you're in essentially saudi arabia am i right? your temperatures will play a HUGE role. as well as the octane standards. as far as i know, saudia arabia, and most of the world uses a "RON" (research octane number) octane rating. the USA on the other hand uses an "AKI" (anti knock index).

a quick google search turns up our 91 in the USA is equivalent to the posted "95" octane in the rest of the world. which could very well explain your power differences. as well as the low humidity/high heat in that part of the region. but back to the octane ratings, it seems you're essentially putting in what us americans know as "87" into your Z. hence the lowered power ratings.

edit: wikipedia'd it:

Quote:

Bahrain: 91 and 95 (RON), standard in all petrol station in the country and advertised as (Jayyid) for Regular or 91 and (Mumtaz) for Premium or 95.

zuperman 370 · 03-11-2012, 04:58 PM

Quote:

Originally Posted by chops

im surprised no one has said this yet...you're in essentially saudi arabia am i right? your temperatures will play a HUGE role. as well as the octane standards. as far as i know, saudia arabia, and most of the world uses a "RON" (research octane number) octane rating. the USA on the other hand uses an "AKI" (anti knock index).

a quick google search turns up our 91 in the USA is equivalent to the posted "95" octane in the rest of the world. which could very well explain your power differences. as well as the low humidity/high heat in that part of the region. but back to the octane ratings, it seems you're essentially putting in what us americans know as "87" into your Z. hence the lowered power ratings.

edit: wikipedia'd it:

Chops couldn't of said it any better, I had in mind the lower gains were due to the lower fuel rating in Bahrain but with regards o the weather it is good this tine of year and that's why I opted to get it dynoed.

On a brighter note I got the car dynoed on a different dyno tonight and got more realistic numbers, this is of course pre tuned numbers, I'm hoping to get around 300 hp tuned, the numbers that I got are as follows 286 hp and 251tq, so I am a bit happier now, I'm hoping for around 300 tuned, do you guys think I van achieve that or am I expecting too much? What do you guys think is a realistic number for me after tune, and instalation of jun cams, dare I say 320hp ?

lpsscc · 03-11-2012, 05:45 PM

Not to hi-jack but I love Bahrain... Just sayin!

Heading that way in a month or so. Gold souq here I come!

lp

zuperman 370 · 03-11-2012, 05:50 PM

Loool your more than welcome, u coming over for the F1 race?

chops · 03-11-2012, 06:50 PM

Quote:

Originally Posted by zuperman 370

Chops couldn't of said it any better, I had in mind the lower gains were due to the lower fuel rating in Bahrain but with regards o the weather it is good this tine of year and that's why I opted to get it dynoed.

On a brighter note I got the car dynoed on a different dyno tonight and got more realistic numbers, this is of course pre tuned numbers, I'm hoping to get around 300 hp tuned, the numbers that I got are as follows 286 hp and 251tq, so I am a bit happier now, I'm hoping for around 300 tuned, do you guys think I van achieve that or am I expecting too much? What do you guys think is a realistic number for me after tune, and instalation of jun cams, dare I say 320hp ?

make sure to run it empty on the 91. get some 95 in there!!

03-10-2012, 03:01 AM	#31 (permalink)
Mandingo Track Member Join Date: Nov 2010 Location: Dallas Posts: 625 Drives: '10 370z 6spd Rep Power: 3371	Run that tank of gas through and get the highest octane rating you can (91 is the highest there?) from a station that you know to have quality gas. Then dyno in 5th gear. I recently filled up with nonamebrand 91 octane from a grocery store to use up our 'gas reward points' Bad idea. My car bogged down off the line and just generally felt unhealthy until I diluted the tank with some 93 octane. __________________ some mods

03-10-2012, 10:05 AM	#32 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 16	I would go get it dynoed by another company just Because. Yea I would be very upset to you should be making 320 wrhp at least. Something has to be wrong. But next step I would do if I were you is get a tune. __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

03-11-2012, 02:16 PM	#39 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	I don't think you're expecting too much. +8 hp gain pretune is not normal for the mods you have. I think the problem is the dyno and/or engine. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Dyno Numbers	joshs09slvrZ	Tuning	20	10-27-2011 08:39 AM
Dyno Numbers with mods	jtgarza3	Nissan 370Z Roadster (Convertible)	5	05-11-2011 11:59 PM
Dyno Numbers	PR370z	Intake/Exhaust	13	12-05-2010 10:56 AM
My Stock Dyno Numbers!	Mythic	Nissan 370Z General Discussions	28	09-01-2010 02:53 PM
nismo dyno numbers	Supergoji	Nissan 370Z General Discussions	36	05-06-2010 10:17 AM

03-10-2012, 10:28 AM	#33 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 16	thats why i got so disappointed, but i will do that, get it dynoed at some other place as well as put fuel from a cleaner station before i get it tuned.

03-10-2012, 11:10 PM	#34 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 13	1) Drag strip will tell you nothing of power, if i can race a WRX with 300WHP and make the same MPH at the end of the quarter when i'm in a stock 2001 mustang, what does that tell you? It's all driver and grip levels, remember the stang is RWD and the WRX is AWD. 2) Don't expect much from bolt ons with recent/modern cars, they work their way around the parts as best they can, the tune is what allows them to work. Get it tuned, you can't whine until then.

03-11-2012, 03:24 AM	#35 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 16	i understand that is correct, i will get it tuned next but still expected better numbers at least 290 pre tuned

03-11-2012, 05:40 AM	#36 (permalink)
Presto Base Member Join Date: May 2010 Location: Home Posts: 123 Drives: Car Rep Power: 15	what is the highest grade of fuel available in your country?

03-11-2012, 01:16 PM	#38 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 13	You have to understand that the ECU will not change like the OBDI systems did, so you can't get that kind of increase pre tune. OBDII was brought in to be stricter and make the engine try and get back to the factory state. I understand that these newer versions of OBDII are even more so this way, very hard to change the overall running. OBDI only adapted to the situation, so an easier breathing filter, it would put in more fuel for example. ODBII, would see the easier breathing, but try and tune it's self in order that it didn't put more fuel through than it's original design was told. Basically, you're expecting too much, it won't happen, the tunes are needed these days more than ever because they change the mind of the ECU as to what they should be doing.

03-11-2012, 02:21 PM	#40 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 16	I think its the dyno I will have it dynoed in an hours time and have numbers posted

03-11-2012, 05:45 PM	#43 (permalink)
lpsscc Base Member Join Date: Jan 2012 Location: Charleston, SC Posts: 75 Drives: 40th, Altima SE-R Rep Power: 13	Not to hi-jack but I love Bahrain... Just sayin! Heading that way in a month or so. Gold souq here I come! lp

03-11-2012, 05:50 PM	#44 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 16	Loool your more than welcome, u coming over for the F1 race?