New Style Takeda Attack Intakes $400 - Got mine!

DarkJak · 05-15-2013, 02:38 AM

Quote:

Originally Posted by Z_Enthusiast

I installed mine several months ago via the instructions and felt the car lagged a little sub 3k rpm. I tried researching if the duct which restricts the rubber tubing makes a difference cut vs. uncut. No results. I decided to try it myself and after cutting and letting the ecu relearn it feels stronger. I don't have anything to prove this except for my butt dyno....

It's pretty believable that you gained a few hp from that. The cross section where the silicon tube passes throug the uncut hole is a lot smaller than uncompressed. Did you cut the same way the Gen III's require cutting? Like do the tubes go through the same location?

RUFFSTUFF · 05-15-2013, 06:00 AM

Ummmm... there's nothing to CUT. The radiator supports simply unbolt. Might even be just one bolt each, its been awhile, I don't remember exactly.

lemon-fresh · 05-15-2013, 11:31 AM

Oh there is definitely stuff to cut...

Neat thing about cutting that area is that you can re-insert the plastic air ducts and return the car to near stock.

Gibby1113 · 05-15-2013, 02:18 PM

Isn't that from the stillen instructions? Don't the takedas just require the removal of the plastic duct and you insert the part from the takeda intake?

UFreefer · 05-15-2013, 03:27 PM

I did a before and after dyno test of the Takeda's on my car compared to K&N drop in's and there was no loss anywhere in the powerband.

RUFFSTUFF · 05-15-2013, 03:29 PM

Quote:

Originally Posted by lemon-fresh

Oh there is definitely stuff to cut...

Neat thing about cutting that area is that you can re-insert the plastic air ducts and return the car to near stock.

And if you look at the picture you posted, you will notice that that piece (and the one on the other side) simply unbolt. As a bonus, they provide no real function and can save you maybe 1/4 pound!

You DO NOT HAVE to cut anything. That is how I did mine, individual results may vary...

lemon-fresh · 05-15-2013, 03:41 PM

I think the point of cutting when installing takedas is so that the silicon tubes have more room going through the opening and don't need to be deformed as much. Just makes the flow of air more smooth. Obviously you don't NEED to cut anything hence why they used silicon tubes in the first place.

Didn't know you could easily unbolt the whole thing, they also provide some support for the tubes so that they don't rest directly on AC lines.

Quote:

Originally Posted by Gibby1113

Isn't that from the stillen instructions? Don't the takedas just require the removal of the plastic duct and you insert the part from the takeda intake?

Was just pointing out where one might cut if they wanted to.

Gibby1113 · 05-15-2013, 03:53 PM

Would you recommend doing this for the takeda intakes? Any difference in power?

UFreefer · 05-15-2013, 05:11 PM

Quote:

Originally Posted by RUFFSTUFF

And if you look at the picture you posted, you will notice that that piece (and the one on the other side) simply unbolt. As a bonus, they provide no real function and can save you maybe 1/4 pound!

You DO NOT HAVE to cut anything. That is how I did mine, individual results may vary...

Same here, I just unbolted it and the silicone tube then fits perfectly

RUFFSTUFF · 05-15-2013, 05:45 PM

Quote:

Originally Posted by lemon-fresh

Didn't know you could easily unbolt the whole thing, they also provide some support for the tubes so that they don't rest directly on AC lines.

Was just pointing out where one might cut if they wanted to.

There should be no reason for the tubes to be resting on any lines... between the filter mounted to that bracket and the tubes at the engine, the intake is fairly firmly mounted.

Gibby1113 · 05-15-2013, 05:48 PM

Gonna install mine next week guys wish me luck!!

Btw has anyone heard of the Akrapovic exhaust? Looks pretty sweet

Gibby1113 · 05-15-2013, 05:48 PM

Anyone know what they run for???? Thanks

lemon-fresh · 05-15-2013, 06:01 PM

Quote:

Originally Posted by RUFFSTUFF

There should be no reason for the tubes to be resting on any lines... between the filter mounted to that bracket and the tubes at the engine, the intake is fairly firmly mounted.

Cool. Was just saying why and where someone may want to cut.

MacLean · 05-15-2013, 07:06 PM

Quote:

Originally Posted by UFreefer

I did a before and after dyno test of the Takeda's on my car compared to K&N drop in's and there was no loss anywhere in the powerband.

Can you please post the dyno test? I thought & figured the Takeda's would give you more hp than the K&N drop in's.

Gibby1113 · 05-15-2013, 08:09 PM

^ ? Someone explain this to me. I know I sound stupid but how is a cai getting the same number as some filters and tubes on a stock box

05-15-2013, 06:00 AM	#197 (permalink)
RUFFSTUFF Base Member Join Date: Apr 2012 Location: GEORGIA Posts: 233 Drives: 2012 370Z TOURING Rep Power: 13	Ummmm... there's nothing to CUT. The radiator supports simply unbolt. Might even be just one bolt each, its been awhile, I don't remember exactly. __________________ 2012 370Z Touring w/ NAV, Black Powdercoat, aFe Takeda CAI, Invidia Gemini Ti-tip Catback Exhaust, DVD/NAV bypass

05-15-2013, 02:18 PM	#199 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 13	Isn't that from the stillen instructions? Don't the takedas just require the removal of the plastic duct and you insert the part from the takeda intake? __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

05-15-2013, 03:53 PM	#203 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 13	Would you recommend doing this for the takeda intakes? Any difference in power? __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

05-15-2013, 05:48 PM	#206 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 13	Gonna install mine next week guys wish me luck!! Btw has anyone heard of the Akrapovic exhaust? Looks pretty sweet __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

05-15-2013, 05:48 PM	#207 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 13	Anyone know what they run for???? Thanks __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

05-15-2013, 11:31 AM	#198 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	Oh there is definitely stuff to cut... Neat thing about cutting that area is that you can re-insert the plastic air ducts and return the car to near stock.

05-15-2013, 03:27 PM	#200 (permalink)
UFreefer Base Member Join Date: Mar 2010 Location: Tampa Posts: 200 Drives: 09 Sport Touring Nav Rep Power: 15	I did a before and after dyno test of the Takeda's on my car compared to K&N drop in's and there was no loss anywhere in the powerband.

05-15-2013, 08:09 PM	#210 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 13	^ ? Someone explain this to me. I know I sound stupid but how is a cai getting the same number as some filters and tubes on a stock box __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blowing out Takeda intakes!!! Only @ IIR*********************************************	ImportImage	Exhaust/Intake	174	07-16-2014 03:51 PM
Takeda Short Ram intakes	toxik	North East Region	0	05-14-2011 12:28 AM
FS: Takeda Intakes	JB1	Parts for sale (Private Classifieds)	24	03-31-2010 11:56 AM
Takeda intakes and Scangauge info	JB1	Intake/Exhaust	11	01-27-2010 12:48 AM