New Style Takeda Attack Intakes $400 - Got mine!

dastaco · 12-16-2012, 01:45 PM

Just ordered mine, big thanks to everyone who has posted the deal and coupon codes.

RUFFSTUFF · 12-16-2012, 02:08 PM

Quote:

Originally Posted by blueranger

Looks Good

Do these come in Black?

No.

axmea? · 12-16-2012, 06:13 PM

Quote:

Originally Posted by agrotech

Finally got around to installing mine yesterday. Wow, what a difference they make! Nice deep growl on WOT!!

[IMG]

[/IMG][/IMG]

Big difference in the sound doesn't it. Also, noticeable torque too. Also, wait 'til you get the exhaust.

NBZ34 · 12-16-2012, 06:18 PM

Yes, definitely feel more torque too. I'm waiting to dyno after i get the CBE and HFC (mostly so I'm not disappointed in the dropoff as each mod is added).

Yutnaka · 12-16-2012, 07:36 PM

Looks nice! Mine will be arriving Wednesday. Hope the install goes smoothly.

stevent85 · 12-17-2012, 01:05 AM

Ive had these on my nismo for a couple months. Got them through b2autodesigns vendor here on the forums. Install is easy....but the instructions that come with the intakes are crap. Haha use the diy gen3 instructions from the forums....same exact instructions minus the cutting and filter location. Love the intakes!

ts-c63 · 12-17-2012, 01:54 AM

does this intake require a tune? Or should I just get a tune since my car has other breathing mods (hfcs, cbe)?

stevent85 · 12-17-2012, 02:09 AM

Technically not necessary but would be beneficial to maximize potential gains.

NBZ34 · 12-17-2012, 07:28 AM

yeah, the supplied instructions unfortunately leaves out a few key details.. most notably being the removal of the plastic pieces in the radiator passthrough where the stock air boxes connected to. Fortunately, having read this entire thread previously, I was already aware that these had to be removed.

Yutnaka · 12-25-2012, 06:11 PM

I finished my install on Sunday. I went from a post maf setup to the Takeda....wow. I was preparing to not feel much, but there is alot more torque. The engine breathes alot better too. Highly recommended!

1st · 12-25-2012, 10:19 PM

I went to the link where these are being sold and did not see anything about it being carb legal. Does anybody know if they are? These are Greddy replica cai so that adds to the greatness since they are linked up company's now.

1st · 12-26-2012, 07:55 PM

Does anybody know if these are carb legal? Thanks

axmea? · 12-26-2012, 08:31 PM

Quote:

Originally Posted by 1st

I went to the link where these are being sold and did not see anything about it being carb legal. Does anybody know if they are? These are Greddy replica cai so that adds to the greatness since they are linked up company's now.

There is a partnership but these are not Greddy replicas. aFe has been making these things for a while now and Greddy partnered with aFe to make the same with the Greddy name on it. You should call aFe to address your concern whether it is carb legal or not.

1st · 12-27-2012, 12:27 AM

Quote:

Originally Posted by axmea?

There is a partnership but these are not Greddy replicas. aFe has been making these things for a while now and Greddy partnered with aFe to make the same with the Greddy name on it. You should call aFe to address your concern whether it is carb legal or not.

Thanks for the 411. Ya im going to call tomorrow but i dont think they are. Do to you have them your in california and stated nothing about a carb sticker.

axmea? · 12-27-2012, 12:44 AM

aFe's Website is pretty lame. Does not have information unlike AEM's. At AEM, they address the CARB issue and explains that their intakes are not subject to CARB so they say and explains the workaround. I am thinking aFe does the same but I could be wrong.

12-16-2012, 01:45 PM	#136 (permalink)
dastaco Enthusiast Member Join Date: Jul 2011 Location: Cincinnati Posts: 348 Drives: Questionably Rep Power: 14	Just ordered mine, big thanks to everyone who has posted the deal and coupon codes. __________________

12-16-2012, 06:18 PM	#139 (permalink)
NBZ34 Enthusiast Member Join Date: Jan 2012 Location: New Braunfels, TX Age: 54 Posts: 467 Drives: '12 Touring AT Sport Rep Power: 13	Yes, definitely feel more torque too. I'm waiting to dyno after i get the CBE and HFC (mostly so I'm not disappointed in the dropoff as each mod is added). __________________ *CHRIS* 開田 2012 370Z MB Touring/Sport/AT/Nav \| Takeda \| Fast Intentions \| SWIFT \| H&R \| UpRev \| Michelin PSS \|

12-16-2012, 07:36 PM	#140 (permalink)
Yutnaka Base Member Join Date: Apr 2011 Location: Columbus, GA Posts: 212 Drives: 2011 370z 7at GM Rep Power: 14	Looks nice! Mine will be arriving Wednesday. Hope the install goes smoothly. __________________ Z1 Test Pipes, AAM S-Line Midpipe, Nismo Axleback, Takeda CAI, JDM fog light, Avant Garde M310 matte black, Tein springs, uprev 310whp-SOLD!

12-17-2012, 01:05 AM	#141 (permalink)
stevent85 Track Member Join Date: Sep 2012 Location: El Paso, TX Posts: 928 Drives: 2011 370Z NISMO Rep Power: 14	Ive had these on my nismo for a couple months. Got them through b2autodesigns vendor here on the forums. Install is easy....but the instructions that come with the intakes are crap. Haha use the diy gen3 instructions from the forums....same exact instructions minus the cutting and filter location. Love the intakes! __________________ Takeda stage 2 CAI, Z1 HFC, GREDDY Turbo TI-C

12-17-2012, 02:09 AM	#143 (permalink)
stevent85 Track Member Join Date: Sep 2012 Location: El Paso, TX Posts: 928 Drives: 2011 370Z NISMO Rep Power: 14	Technically not necessary but would be beneficial to maximize potential gains. __________________ Takeda stage 2 CAI, Z1 HFC, GREDDY Turbo TI-C

12-17-2012, 01:54 AM	#142 (permalink)
ts-c63 Enthusiast Member Join Date: Feb 2011 Location: nyc/nj Posts: 384 Drives: 2012 370z 7At Rep Power: 14	does this intake require a tune? Or should I just get a tune since my car has other breathing mods (hfcs, cbe)?

12-17-2012, 07:28 AM	#144 (permalink)
NBZ34 Enthusiast Member Join Date: Jan 2012 Location: New Braunfels, TX Age: 54 Posts: 467 Drives: '12 Touring AT Sport Rep Power: 13	yeah, the supplied instructions unfortunately leaves out a few key details.. most notably being the removal of the plastic pieces in the radiator passthrough where the stock air boxes connected to. Fortunately, having read this entire thread previously, I was already aware that these had to be removed. __________________ *CHRIS* 開田 2012 370Z MB Touring/Sport/AT/Nav \| Takeda \| Fast Intentions \| SWIFT \| H&R \| UpRev \| Michelin PSS \|

12-25-2012, 06:11 PM	#145 (permalink)
Yutnaka Base Member Join Date: Apr 2011 Location: Columbus, GA Posts: 212 Drives: 2011 370z 7at GM Rep Power: 14	I finished my install on Sunday. I went from a post maf setup to the Takeda....wow. I was preparing to not feel much, but there is alot more torque. The engine breathes alot better too. Highly recommended! __________________ Z1 Test Pipes, AAM S-Line Midpipe, Nismo Axleback, Takeda CAI, JDM fog light, Avant Garde M310 matte black, Tein springs, uprev 310whp-SOLD!

12-25-2012, 10:19 PM	#146 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,708 Drives: Platinum Z Rep Power: 1616	I went to the link where these are being sold and did not see anything about it being carb legal. Does anybody know if they are? These are Greddy replica cai so that adds to the greatness since they are linked up company's now. Last edited by 1st; 12-25-2012 at 10:30 PM.

12-26-2012, 07:55 PM	#147 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,708 Drives: Platinum Z Rep Power: 1616	Does anybody know if these are carb legal? Thanks

12-27-2012, 12:44 AM	#150 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	aFe's Website is pretty lame. Does not have information unlike AEM's. At AEM, they address the CARB issue and explains that their intakes are not subject to CARB so they say and explains the workaround. I am thinking aFe does the same but I could be wrong. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blowing out Takeda intakes!!! Only @ IIR*********************************************	ImportImage	Exhaust/Intake	174	07-16-2014 03:51 PM
Takeda Short Ram intakes	toxik	North East Region	0	05-14-2011 12:28 AM
FS: Takeda Intakes	JB1	Parts for sale (Private Classifieds)	24	03-31-2010 11:56 AM
Takeda intakes and Scangauge info	JB1	Intake/Exhaust	11	01-27-2010 12:48 AM