K&N filters...yay or nay? (from a filtration standpoint)

ImportConvert · 03-01-2012, 01:42 AM

Quote:

Originally Posted by Jordo!

Oiled cotton or synthetic dry works best, with slightly better flow on the oiled cotton at the cost of some filtration (slightly better for the dry). Both should flow and filter better than paper, so no worries.

Foam filters suck. The HKS is a foam filter.

I too just sell off the old for someone else to clean and purchase new ones. Less of a hassle.

based on my UOA's, which also measure particles that indicate poor air filtration, my K&N's work well.

Have you compared silicates from K&N vs. non K&N filtered on the same vehicle?

fuct · 03-01-2012, 09:20 AM

i had the HKS drop ins for about 6 months. they seemed so flimsy and the filtration looked like something off my vacuum. :\

ive had the K&N's in for a year now. so far so good!

Omikron · 03-01-2012, 09:36 AM

Quote:

Originally Posted by m4a1mustang

I always buy a new filter anyways. F*ck if I am going to waste my time cleaning and re-oiling or washing or whatever.

LOL

Speedy · 03-01-2012, 11:17 AM

Quote:

Originally Posted by Jordo!

Oiled cotton or synthetic dry works best, with slightly better flow on the oiled cotton at the cost of some filtration (slightly better for the dry). Both should flow and filter better than paper, so no worries.

Foam filters suck. The HKS is a foam filter.

I too just sell off the old for someone else to clean and purchase new ones. Less of a hassle.

based on my UOA's, which also measure particles that indicate poor air filtration, my K&N's work well.

You got the UOAs posted up anywhere? I'd like to check some out on the Z.

shaun66 · 03-01-2012, 11:41 AM

Quote:

Originally Posted by ImportConvert

K&N--because I'll sell you a set.

What filters are you going with now?

roplusbee · 03-01-2012, 01:10 PM

This discussion is specifically for OEM replacement or is cone type inicluded? I want to replace the mushrooms that come w/ the Greddy unit with a cone type filter (dry type).

Jordo! · 03-01-2012, 03:35 PM

Quote:

Originally Posted by ImportConvert

Have you compared silicates from K&N vs. non K&N filtered on the same vehicle?

Hmm. To be fair, no I have not. But silicates were all below levels of concern, so whether or not they filter better than x or y filter is unknown, but they do work well based on the ppm criterion.

Frankly, I found the oiled medium to work better (i.e., better throttle response) in humid or wet weather relative to the dry synthetic stuff -- that could be all in my head, but I've heard a similar observation from others as well, and oil does after all repel water.

MaDMaXX · 03-01-2012, 04:22 PM

If we're talking ability to filter the crap out, i won't touch K&N with a barge pole these days.

Yes they do breathe more than most filters, however, they filter fairly poorly. When i start seeing the cotton material turning up in UOA's, then stop to think for a second what the path would be to get there, i figure i'd like *some* filtering on my engine.

I don't like wet type filters anyway, dry has a lot more benefits and consistency than oiled types.

BTW, paper is the medium used to see what passes through all these performance filters, you should be using the factory/paper medium filters as a benchmark for filtration ability.

My next filter will likely be an Apexi drop in filter if not the factory fit.

Jordo! · 03-01-2012, 04:35 PM

Quote:

Originally Posted by MaDMaXX

If we're talking ability to filter the crap out, i won't touch K&N with a barge pole these days.

Yes they do breathe more than most filters, however, they filter fairly poorly. When i start seeing the cotton material turning up in UOA's, then stop to think for a second what the path would be to get there, i figure i'd like *some* filtering on my engine.

I don't like wet type filters anyway, dry has a lot more benefits and consistency than oiled types.

BTW, paper is the medium used to see what passes through all these performance filters, you should be using the factory/paper medium filters as a benchmark for filtration ability.

My next filter will likely be an Apexi drop in filter if not the factory fit.

Cotton was showing up in UOA's???

MaDMaXX · 03-01-2012, 08:49 PM

Yup

Jordo! · 03-01-2012, 10:56 PM

Quote:

Originally Posted by MaDMaXX

Yup

Re-used or fresh, never used?

One of the reasons I would just as soon switch them out rather than re-oil (provided I have the $$) is that it's all too easy to cause minor shredding in the cotton when you wash it.

And not just cotton -- I had a dryflow (i.e., synthetic, dry media) AEM filter almost completely fvcking disintegrate on me -- just from washing

If fresh, that's a new one to me -- never heard of such a thing. If re-used, I'm not completely shocked...

MaDMaXX · 03-01-2012, 11:18 PM

I don't recall tbh, but the very nature of their makeup means they're going to fail at some random unknown point, that kind of service life is silly in some areas.

Jordo! · 03-01-2012, 11:19 PM

Quote:

Originally Posted by MaDMaXX

I don't recall tbh, but the very nature of their makeup means they're going to fail at some random unknown point, that kind of service life is silly in some areas.

Yeesh... well, food for thought. Thanks for letting us know

ImportConvert · 03-01-2012, 11:33 PM

Quote:

Originally Posted by shaun66

What filters are you going with now?

Cosworth

Rooskey · 03-01-2012, 11:44 PM

What about a k&n with an outerwears cover??

03-01-2012, 01:10 PM	#51 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	This discussion is specifically for OEM replacement or is cone type inicluded? I want to replace the mushrooms that come w/ the Greddy unit with a cone type filter (dry type). __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS - K&N Filters	cab83_750	Parts for sale (Private Classifieds)	1	12-15-2010 06:24 AM
K&N Air Filters for HR Z/G	kuhan	Parts for sale (Private Classifieds)	5	11-16-2010 09:05 PM
From a performance standpoint...	darrinps	Intake/Exhaust	5	10-02-2010 09:33 AM
Wix air filters?	import111	Intake/Exhaust	6	04-11-2010 03:35 PM
K & N Filters	NyCSnEaK	Parts for sale (Private Classifieds)	4	03-08-2010 06:31 PM

03-01-2012, 09:20 AM	#47 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	i had the HKS drop ins for about 6 months. they seemed so flimsy and the filtration looked like something off my vacuum. :\ ive had the K&N's in for a year now. so far so good!

03-01-2012, 04:22 PM	#53 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 13	If we're talking ability to filter the crap out, i won't touch K&N with a barge pole these days. Yes they do breathe more than most filters, however, they filter fairly poorly. When i start seeing the cotton material turning up in UOA's, then stop to think for a second what the path would be to get there, i figure i'd like some filtering on my engine. I don't like wet type filters anyway, dry has a lot more benefits and consistency than oiled types. BTW, paper is the medium used to see what passes through all these performance filters, you should be using the factory/paper medium filters as a benchmark for filtration ability. My next filter will likely be an Apexi drop in filter if not the factory fit.

03-01-2012, 08:49 PM	#55 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 13	Yup

03-01-2012, 11:18 PM	#57 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 13	I don't recall tbh, but the very nature of their makeup means they're going to fail at some random unknown point, that kind of service life is silly in some areas.

03-01-2012, 11:44 PM	#60 (permalink)
Rooskey Track Member Join Date: Jul 2010 Location: South Carolina Posts: 974 Drives: 2014 Alpha7 GTR Rep Power: 16	What about a k&n with an outerwears cover??