Z1 Post MAF Tubes

moto_italia · 02-13-2012, 06:02 PM

Quote:

Originally Posted by ZMan8

hmmm weird that Z1 says there are no power gains when the design seems almost the same

Smart play on Z1's part. The dyno is already out there for the exact same product from a competitor, so why put out HP claims that will only prompt people to bitch if they don't get the same dyno results.

daisuke149 · 02-13-2012, 06:05 PM

Quote:

Originally Posted by moto_italia

Smart play on Z1's part. The dyno is already out there for the exact same product from a competitor, so why put out HP claims that will only prompt people to bitch if they don't get the same dyno results.

Correct, i wouldnt make a claim on this. If people undrstand how they work and everything they do, that should be enough.

khan7860 · 02-13-2012, 06:37 PM

Hell yea!! If you buy it good for you and if you don't then good for you as well. Mine is on the way.

KB2 · 02-13-2012, 07:12 PM

i have the hps version of these. i like em, i went with afe dry flow pannel filters however.

did i gain power? i have no idea. but with all the documentation and evidence that cai's dont do much on our car,besides in the high rpms i determined that the $500 + wasnt worth it.

some people are all about these,and others are all for the intakes.

maggotcorps · 05-11-2015, 05:47 PM

that moment when you want to get in on the conversation but realize that the thread is almost 5 years old.....

Zcup · 07-16-2015, 06:23 PM

Yup,this thread is old. Here's mine. I DIY'd but they were kind of hard to get on. It would have been easy had I removed the strut beam but could not get those bolts loose.

20150511_195549.jpg

mattanthony23 · 07-16-2015, 06:28 PM

Quote:

Originally Posted by Zcup

Yup,this thread is old. Here's mine. I DIY'd but they were kind of hard to get on. It would have been easy had I removed the strut beam but could not get those bolts loose.

Attachment 105628

They look really good! Most users claim to feel a better throttle response after installation. Have you noticed that or other improvements in performance?

SwissCheese · 07-16-2015, 09:59 PM

Quote:

Originally Posted by mattanthony23

They look really good! Most users claim to feel a better throttle response after installation. Have you noticed that or other improvements in performance?

Also curious about this.

JC-Nismo · 07-16-2015, 10:42 PM

A waste of $108 it seems..........

I was gonna buy these tomorrow cause I'm not far from Z1, but after reading this, I'll keep my money.
How does it breathe better, but gains nothing??? Will it make the K&N Filters perform better?
Other than that, what's the point? Is there a cool factor of having these under the hood where Some would waste $108 for pretty much ............NOTHING!!!

Pelican170 · 07-17-2015, 02:53 PM

Quote:

Originally Posted by JC-Nismo

A waste of $108 it seems..........

I was gonna buy these tomorrow cause I'm not far from Z1, but after reading this, I'll keep my money.
How does it breathe better, but gains nothing??? Will it make the K&N Filters perform better?
Other than that, what's the point? Is there a cool factor of having these under the hood where Some would waste $108 for pretty much ............NOTHING!!!

A long time ago someone posted the gains from these. They were just short of the long tube intakes people put on, but keep more mid range power. I believe the dyno showed a 6 - 8 hp gain. Again, this was years ago so im not sure where to even look for the info. It was on these forums though...

Pelican170 · 07-17-2015, 02:54 PM

Quote:

Originally Posted by KB2

i have the hps version of these. i like em, i went with afe dry flow pannel filters however.

did i gain power? i have no idea. but with all the documentation and evidence that cai's dont do much on our car,besides in the high rpms i determined that the $500 + wasnt worth it.

some people are all about these,and others are all for the intakes.

You are right. And the $500 metal tubes create heat soak. Better to stay with these...

GZ3 · 07-17-2015, 02:55 PM

twasssss me......they did gain around 5.6 rwhp hp

SwissCheese · 07-17-2015, 08:12 PM

Quote:

Originally Posted by GZ3

twasssss me......they did gain around 5.6 rwhp hp

Was that with a tune?

JC-Nismo · 07-17-2015, 08:16 PM

Quote:

Originally Posted by Pelican170

A long time ago someone posted the gains from these. They were just short of the long tube intakes people put on, but keep more mid range power. I believe the dyno showed a 6 - 8 hp gain. Again, this was years ago so im not sure where to even look for the info. It was on these forums though...

Ok cool, thanks for the info.

GZ3 · 07-17-2015, 08:33 PM

Quote:

Originally Posted by SwissCheese

Was that with a tune?

No tune. I had the hps post mafs. Pretty sure z1 is the same. This time im going with mishimoto

05-11-2015, 05:47 PM	#20 (permalink)
maggotcorps Base Member Join Date: Nov 2014 Location: Chula Vista, CA Posts: 85 Drives: 11 370z MB AT Rep Power: 10	that moment when you want to get in on the conversation but realize that the thread is almost 5 years old..... Kzonts, nightZ_driver, antjmcc07 and 1 others like this. __________________ 2011 MB 370z Touring w/Sport F.I. TDX Cat Back 18" res. Exhaust // F.I. Long Tube Headers // K&N Drop-in // Z1 Silicone Post-MAF Intake Hose

07-16-2015, 06:23 PM	#21 (permalink)
Zcup Base Member Join Date: Dec 2014 Location: Kansas City Posts: 39 Drives: 13 370Z Touring Rep Power: 10	Yup,this thread is old. Here's mine. I DIY'd but they were kind of hard to get on. It would have been easy had I removed the strut beam but could not get those bolts loose. 20150511_195549.jpg __________________ F.I. CBE/Z1 Post MAF Tubes/ K&N Drop-ins

07-17-2015, 02:55 PM	#27 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 21	twasssss me......they did gain around 5.6 rwhp hp __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My new HPS post MAF tubes installed	Azroadster	Intake/Exhaust	423	08-22-2016 10:31 PM
[FOR SALE] HPS Post MAF Silicone Tubes	pkrifa	Parts for sale (Private Classifieds)	3	12-17-2011 08:09 PM
Post Maf Tubes AND Pop Charger??	370guy	Intake/Exhaust	2	11-22-2011 07:31 PM
[FOR SALE] AFE dry drop ins, HPS post MAF tubes	Kastley85891	Parts for sale (Private Classifieds)	2	05-09-2011 09:03 PM
FS new HPS post MAF tubes	azn370z	North West Region	0	03-14-2011 10:49 PM

02-13-2012, 06:37 PM	#18 (permalink)
khan7860 Base Member Join Date: Jan 2012 Location: Tacoma, WA Posts: 33 Drives: 2009 Nissan 370Z CS Rep Power: 13	Hell yea!! If you buy it good for you and if you don't then good for you as well. Mine is on the way.

02-13-2012, 07:12 PM	#19 (permalink)
KB2 Base Member Join Date: Apr 2010 Location: Illinois Posts: 243 Drives: 370z Rep Power: 15	i have the hps version of these. i like em, i went with afe dry flow pannel filters however. did i gain power? i have no idea. but with all the documentation and evidence that cai's dont do much on our car,besides in the high rpms i determined that the $500 + wasnt worth it. some people are all about these,and others are all for the intakes.

07-16-2015, 10:42 PM	#24 (permalink)
JC-Nismo A True Z Fanatic Join Date: Sep 2014 Location: Atlanta Posts: 1,244 Drives: 2011 Nismo 370z Rep Power: 13	A waste of $108 it seems.......... I was gonna buy these tomorrow cause I'm not far from Z1, but after reading this, I'll keep my money. How does it breathe better, but gains nothing??? Will it make the K&N Filters perform better? Other than that, what's the point? Is there a cool factor of having these under the hood where Some would waste $108 for pretty much ............NOTHING!!!