GT-R R35 Plenum Test Fitment on my VQ37HR

Kingbaby · 04-30-2013, 03:36 PM

oh man...

you wouldn't happen to have a Z33 laying around to test fit and dyno on would ya?

Sh0velMan · 04-30-2013, 03:36 PM

Dyynooooooos

Kingbaby · 04-30-2013, 03:41 PM

not to derail this thread but from eyeballing it should fit a Z33 easily...

that's from using the oil filler cap as a reference?

Sh0velMan · 04-30-2013, 03:42 PM

Yeah get rid of the strut brace and it looks like it should fit if you wrangle your intakes.

ChrisUR · 04-30-2013, 03:46 PM

I'm pretty sure it will fit the VQ35HR - if the lower intake manifold and the upper intake plenum is exchangeable between Z33 and Z34 it should be a no brainer !

Kingbaby · 04-30-2013, 03:47 PM

can you take a pic without the cover on? thanks

370Z JT · 04-30-2013, 04:36 PM

When will you be putting it on the dyno.

DIGItonium · 04-30-2013, 04:52 PM

Very nice especially how you cleared the oil cap. Did it change the engine sound in any way? That's pretty cool how you were able to keep the stock fuel rail.

Assuming my engine can stay in one piece after a tune to about 500 whp, I wouldn't mind making the switch. However, if I do that I'd love to get new spark plugs, injectors, EBC, 3" DP and exhaust, and a tune to at least 500 whp while keeping the block stock.

What's holding me back is no more work on this car for at least another year due to priorities.

Jordo! · 04-30-2013, 05:50 PM

Looking good -- looking forward to dynos

Also curious to see what will be done for the strut brace...

ChrisUR · 04-30-2013, 09:06 PM

thank you guys for the positive feedback ! Tomorrow I will try to do a longer test drive for about 120km (~75miles) so the ECU is able to regain its learn tables.

After that I unfortunately have to make a break with this project for about a week as I'm flying to Egypt (diving the red sea) but I promise to put it on the dyno straight after my return in a good week. Please bear with me, the results are near and I'm at least as curious to see dyno numbers as you are.

And promised I will post the outcome regardless of what it will be. If I keep stock power or even loose power (with NA) I probably have at least a (very expensive) engine bay styling upgrade and can claim to have the only 370Z with a GT-R manifold installed and actually working in the world

But the hope is still alive and chances are not too bad it could work out - fingers crossed !

Just for your reference my last dyno results before the manifold project were 311HP to the wheels and 388NM / 286lbf/ft !

Modifications: 2.5" dual exhaust system, 300cpi race catalysts, stillen ss exhaust headers, stillen gen3 intake, NST pulleys, no tune !

Chris

GaleForce · 04-30-2013, 09:20 PM

Have a good time diving. Thanks for the updates.

Mandingo · 04-30-2013, 09:39 PM

Late to the party as usual. This is me right now:

Sh0velMan · 04-30-2013, 10:16 PM

Be sure to drive it HARD on your drive. Get yourself to the nearest Autobahn, in other words.

WOT through to redline in as many gears as you can stomach... let it cool down a little, (while driving) then repeat. Do that a half dozen times and park it til it cools back down to "cold". Then start it up and do it again. By then you'll be more or less fully learned.

Supposedly helps if you clear learned data first (either with Osiris or by unplugging the battery for a while).

Gauge · 05-01-2013, 12:08 AM

regardless of gains that thing is sexy as hell.

wstar · 05-01-2013, 02:07 AM

Quote:

Originally Posted by Sh0velMan

Supposedly helps if you clear learned data first (either with Osiris or by unplugging the battery for a while).

I'd go the battery route. There are so many "learned" things inside this ECU that we probably don't even know what half of them are

04-30-2013, 03:36 PM	#287 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Dyynooooooos __________________ Buy My Car! \| Build Thread

04-30-2013, 03:42 PM	#289 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Yeah get rid of the strut brace and it looks like it should fit if you wrangle your intakes. __________________ Buy My Car! \| Build Thread

04-30-2013, 03:46 PM	#290 (permalink)
ChrisUR Base Member Join Date: Jun 2010 Location: Germany Posts: 116 Drives: 370Z Black Edition Rep Power: 15	I'm pretty sure it will fit the VQ35HR - if the lower intake manifold and the upper intake plenum is exchangeable between Z33 and Z34 it should be a no brainer ! __________________ ProStreet N1 exhaust \| ProStreet N1 Y-Pipe \| STILLEN G3 Intake \| NST Pulley Kit EIBACH Pro-Springs \| EIBACH Pro-Spacers \| EIBACH Sway Bars \| SEIBON GT2 Rear Wing MOCAL Oil Cooler 25row\| STILLEN TransCooler \| STILLEN PS Cooler \| STILLEN Front Fascia

04-30-2013, 04:36 PM	#292 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	When will you be putting it on the dyno. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

04-30-2013, 04:52 PM	#293 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Very nice especially how you cleared the oil cap. Did it change the engine sound in any way? That's pretty cool how you were able to keep the stock fuel rail. Assuming my engine can stay in one piece after a tune to about 500 whp, I wouldn't mind making the switch. However, if I do that I'd love to get new spark plugs, injectors, EBC, 3" DP and exhaust, and a tune to at least 500 whp while keeping the block stock. What's holding me back is no more work on this car for at least another year due to priorities. __________________

04-30-2013, 05:50 PM	#294 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Looking good -- looking forward to dynos Also curious to see what will be done for the strut brace... __________________ Enjoy it. Destroy it.

04-30-2013, 09:06 PM	#295 (permalink)
ChrisUR Base Member Join Date: Jun 2010 Location: Germany Posts: 116 Drives: 370Z Black Edition Rep Power: 15	thank you guys for the positive feedback ! Tomorrow I will try to do a longer test drive for about 120km (~75miles) so the ECU is able to regain its learn tables. After that I unfortunately have to make a break with this project for about a week as I'm flying to Egypt (diving the red sea) but I promise to put it on the dyno straight after my return in a good week. Please bear with me, the results are near and I'm at least as curious to see dyno numbers as you are. And promised I will post the outcome regardless of what it will be. If I keep stock power or even loose power (with NA) I probably have at least a (very expensive) engine bay styling upgrade and can claim to have the only 370Z with a GT-R manifold installed and actually working in the world But the hope is still alive and chances are not too bad it could work out - fingers crossed ! Just for your reference my last dyno results before the manifold project were 311HP to the wheels and 388NM / 286lbf/ft ! Modifications: 2.5" dual exhaust system, 300cpi race catalysts, stillen ss exhaust headers, stillen gen3 intake, NST pulleys, no tune ! Chris DIGItonium, XwChriswX, JC671 and 2 others like this. __________________ ProStreet N1 exhaust \| ProStreet N1 Y-Pipe \| STILLEN G3 Intake \| NST Pulley Kit EIBACH Pro-Springs \| EIBACH Pro-Spacers \| EIBACH Sway Bars \| SEIBON GT2 Rear Wing MOCAL Oil Cooler 25row\| STILLEN TransCooler \| STILLEN PS Cooler \| STILLEN Front Fascia

04-30-2013, 09:20 PM	#296 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Have a good time diving. Thanks for the updates. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

04-30-2013, 09:39 PM	#297 (permalink)
Mandingo Track Member Join Date: Nov 2010 Location: Dallas Posts: 625 Drives: '10 370z 6spd Rep Power: 3371	Late to the party as usual. This is me right now: __________________ some mods

04-30-2013, 10:16 PM	#298 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Be sure to drive it HARD on your drive. Get yourself to the nearest Autobahn, in other words. WOT through to redline in as many gears as you can stomach... let it cool down a little, (while driving) then repeat. Do that a half dozen times and park it til it cools back down to "cold". Then start it up and do it again. By then you'll be more or less fully learned. Supposedly helps if you clear learned data first (either with Osiris or by unplugging the battery for a while). __________________ Buy My Car! \| Build Thread

05-01-2013, 12:08 AM	#299 (permalink)
Gauge Track Member Join Date: Sep 2011 Location: Madison WI Posts: 867 Drives: 2012 370Z Nismo PW Rep Power: 15	regardless of gains that thing is sexy as hell. __________________ I am a demon bolt slayer.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kinetix 370Z Intake Plenum! Should i Buy it ?	Zedx	Intake/Exhaust	41	04-21-2012 01:59 PM
vq37hr	darron	Wanted	6	09-08-2011 12:27 AM
Plenum spacer anyone???	john370z	Intake/Exhaust	13	03-27-2010 12:02 PM
HKS test fitment on our PROJECT 370Z	LOU@AMPLIFIED	Brakes & Suspension	20	03-23-2009 02:13 PM