JWT pop charger question...

Methodical4u · 10-18-2011, 03:58 AM

I was bored and looking at different intakes. The pop chargers look cool, but don't seem to yield much as far as power gain. However, I noticed with some of the install pics that the rubber accordion crap is still on them. Can't you install these with post maf tubes that are at least smooth? Just wondering.

gaveup · 10-18-2011, 05:43 AM

I highly doubt it would be worth it to do so.

Methodical4u · 10-18-2011, 01:49 PM

I'm just wondering if anyone had done it... supposedly it had about an 8 hp gain, so depending on how much power the post maf tubes gain and considering some have gained only 14 hp with the G3's, i'd say it might very well be worth it.

XwChriswX · 10-18-2011, 06:57 PM

The problem would be the connection between the two. Is the outer diameter of the pop charger equal to the inner diameter of Maf tubes...

Find that out, and you'll answer your question.

Biggest hiccup I see is finding somewhere to mount the pop chargers to, or do they come with mounts? Otherwise you're going to have a really long floating tube bouncing around under the hood.

Methodical4u · 10-18-2011, 07:18 PM

Quote:

Originally Posted by XwChriswX

The problem would be the connection between the two. Is the outer diameter of the pop charger equal to the inner diameter of Maf tubes...

Find that out, and you'll answer your question.

Biggest hiccup I see is finding somewhere to mount the pop chargers to, or do they come with mounts? Otherwise you're going to have a really long floating tube bouncing around under the hood.

I ask not because I was really considering them... but the have a very large intake area and it just seems like it could be a very good set up if cooler air could get to them.

XwChriswX · 10-18-2011, 07:20 PM

Quote:

Originally Posted by Methodical4u

I ask not because I was really considering them... but the have a very large intake area and it just seems like it could be a very good set up if cooler air could get to them.

It's just a Wider vs Longer filter. The venturi inside is still the same setup as say Stillen or Injen or K&N Intake filters.

Methodical4u · 10-18-2011, 07:21 PM

Chris .... im not sure how they mount... but some little thing could probably easily be welded on.

XwChriswX · 10-18-2011, 07:23 PM

I wouldn't imagine it being too ridiculous. If you want to be a pioneer then don't let me stop you. Just I think you're like me, you only wanna spend the $$$ Once and be done with it. So you look at every possible option before making the choice...

Methodical4u · 10-18-2011, 07:29 PM

Yeah I try to. I shall find a way to make the power lol

XwChriswX · 10-18-2011, 07:34 PM

Just say **** it and run a fang vent straight to the TB.

FILTERS?!!? We don't need no stinkin' filters!

Methodical4u · 10-18-2011, 07:38 PM

Quote:

Originally Posted by XwChriswX

Just say **** it and run a fang vent straight to the TB.

FILTERS?!!? We don't need no stinkin' filters!

I'll filter it with pet screen .... its tough stuff

XwChriswX · 10-18-2011, 07:39 PM

Quote:

Originally Posted by Methodical4u

I'll filter it with pet screen .... its tough stuff

Gravity filter ftw.

10-18-2011, 03:58 AM	#1 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 16	JWT pop charger question... I was bored and looking at different intakes. The pop chargers look cool, but don't seem to yield much as far as power gain. However, I noticed with some of the install pics that the rubber accordion crap is still on them. Can't you install these with post maf tubes that are at least smooth? Just wondering.

10-18-2011, 05:43 AM	#2 (permalink)
gaveup Enthusiast Member Join Date: Aug 2010 Location: Tamarac FL Posts: 324 Drives: 10 Nissan 370Z MB M6 Rep Power: 181	I highly doubt it would be worth it to do so. __________________ 2010 Magnetic Black Metallic 370Z 6M stillen gen 3 CAI - topspeed test pipes - invidia gemini CBE - UpRev tune 301whp (HP Logic Mustang Dyno)

10-18-2011, 06:57 PM	#4 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	The problem would be the connection between the two. Is the outer diameter of the pop charger equal to the inner diameter of Maf tubes... Find that out, and you'll answer your question. Biggest hiccup I see is finding somewhere to mount the pop chargers to, or do they come with mounts? Otherwise you're going to have a really long floating tube bouncing around under the hood. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

10-18-2011, 07:23 PM	#8 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	I wouldn't imagine it being too ridiculous. If you want to be a pioneer then don't let me stop you. Just I think you're like me, you only wanna spend the $$$ Once and be done with it. So you look at every possible option before making the choice... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

10-18-2011, 07:34 PM	#10 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Just say ** it and run a fang vent straight to the TB. FILTERS?!!? We don't need no stinkin' filters! __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14**

10-18-2011, 01:49 PM	#3 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 16	I'm just wondering if anyone had done it... supposedly it had about an 8 hp gain, so depending on how much power the post maf tubes gain and considering some have gained only 14 hp with the G3's, i'd say it might very well be worth it.

10-18-2011, 07:21 PM	#7 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 16	Chris .... im not sure how they mount... but some little thing could probably easily be welded on.

10-18-2011, 07:29 PM	#9 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 16	Yeah I try to. I shall find a way to make the power lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Charger Srt-8	Falcor	Other Vehicles	49	02-09-2011 04:26 PM
Charger STR-8	kgreen	Track / Autocross / Drifting / Dragstrip	29	03-22-2010 09:46 PM
Jwt pop charger	clayton	Intake/Exhaust	69	03-16-2010 08:53 PM
HKS GT Charger and TT planned by HKS	CCCLXXZ	Forced Induction	45	01-25-2010 08:59 PM
FS: JWT Pop Charger for 350Z	PapoZalsa	Parts for sale (Private Classifieds)	0	01-07-2010 08:38 PM