Post Maf Tubes & Drop-ins, worth it??

Red__Zed · 10-20-2011, 09:16 PM

Quote:

Originally Posted by m4a1mustang

That probably explains why I never experienced it on the street. There are never any real long right handers that you accelerate hard from apex-out on the street. The typical ramp is taken at a constant speed and I am not exactly attempting to pull 1.3G on public roads. I know I have made several spirited on/off ramp runs with the Z on 1/4 tank or less and never had an issue.

Regardless, it's good to know Phunk is making progress and that a solution will be available to those that have the problem (hopefully) shortly.

yeah, it's not really much of a problem on the street. you should never be putting yourself into a fast turn you need to accelerate out of.

one of the rt 28 uphill clovers would be the only spot i ever saw it on the street(dragon aside), but that's likely due to it being an uphill turn.

m4a1mustang · 10-20-2011, 09:19 PM

I wonder if Jon will be interested in the new tank/pickup. I kind of want to drop the tank on a Z now.

Red__Zed · 10-20-2011, 09:19 PM

Quote:

Originally Posted by m4a1mustang

I wonder if Jon will be interested in the new tank/pickup. I kind of want to drop the tank on a Z now.

blades will need one, or at least he will believe us if we tell him he does.

m4a1mustang · 10-20-2011, 09:21 PM

TBH the main thing I am looking forward to is installing some brake ducting.

XwChriswX · 10-20-2011, 09:21 PM

I have nothing informative to contribute to this thread, but I hate Red_Zed so here I am.

Red__Zed · 10-20-2011, 09:22 PM

Quote:

Originally Posted by m4a1mustang

TBH the main thing I am looking forward to is installing some brake ducting.

I just don;t like cutting into the fender liner. I haven't seen anything that doesn't require that.

m4a1mustang · 10-20-2011, 09:23 PM

Quote:

Originally Posted by Red__Zed

I just don;t like cutting into the fender liner. I haven't seen anything that doesn't require that.

Why? It's just plastic. No big deal. Super easy with a hole saw.

The only thing that scares me on the Z is the cats... I will do just about any install on the car but I won't mess with that demon bolt.

XwChriswX · 10-20-2011, 09:24 PM

Quote:

Originally Posted by m4a1mustang

TBH the main thing I am looking forward to is installing some brake ducting.

Is there no other way around this?

Quote:

Originally Posted by Red__Zed

I just don;t like cutting into the fender liner. I haven't seen anything that doesn't require that.

But if you have to... what choice do we have?

Red__Zed · 10-20-2011, 09:25 PM

Quote:

Originally Posted by m4a1mustang

Why? It's just plastic. No big deal. Super easy with a hole saw.

The only thing that scares me on the Z is the cats... I will do just about any install on the car but I won't mess with that demon bolt.

not so much the trouble, more the resale. if you're keeping the car it is not a problem.

I didn't really have issues with the demon bolt, even on jackstands in my garage. I was very worried though...

m4a1mustang · 10-20-2011, 09:26 PM

Quote:

Originally Posted by XwChriswX

Is there no other way around this?

But if you have to... what choice do we have?

It's possible that the brake duct scoops could be routed to take in air from underneath the car, then you wouldn't need to cut anything. But if the ducting takes air from up front, you need to cut the fender liner to run the tubing. But it shouldn't be a problem at all.

m4a1mustang · 10-20-2011, 09:27 PM

Quote:

Originally Posted by Red__Zed

not so much the trouble, more the resale. if you're keeping the car it is not a problem.

I didn't really have issues with the demon bolt, even on jackstands in my garage. I was very worried though...

You realize no one is going to notice a hole in the fender liner, right? It wouldn't be easily observable since it wouldn't be located on the front part of the lining anyways.

XwChriswX · 10-20-2011, 09:28 PM

Quote:

Originally Posted by m4a1mustang

It's possible that the brake duct scoops could be routed to take in air from underneath the car, then you wouldn't need to cut anything. But if the ducting takes air from up front, you need to cut the fender liner to run the tubing. But it shouldn't be a problem at all.

I wouldn't imagine plastic fender liners to be OMG expensive either in the event you were planning to sell at some point?

Red__Zed · 10-20-2011, 09:28 PM

Quote:

Originally Posted by m4a1mustang

You realize no one is going to notice a hole in the fender liner, right? It wouldn't be easily observable since it wouldn't be located on the front part of the lining anyways.

depends who you are selling to I guess. maybe I'm just paranoid.

XwChriswX · 10-20-2011, 09:30 PM

Quote:

Originally Posted by Red__Zed

depends who you are selling to I guess. maybe I'm just paranoid.

:|

m4a1mustang · 10-20-2011, 09:31 PM

Quote:

Originally Posted by XwChriswX

I wouldn't imagine plastic fender liners to be OMG expensive either in the event you were planning to sell at some point?

You never know with the Z... some of the replacement parts are randomly expensive.

One thing I just thought about... the Injen intakes probably wouldn't be compatible with brake ducting since you probably have to route the tubing through the area where the filters would rest (if you are sourcing the air from the front opening).

10-20-2011, 09:19 PM	#152 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	I wonder if Jon will be interested in the new tank/pickup. I kind of want to drop the tank on a Z now. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

10-20-2011, 09:21 PM	#154 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	TBH the main thing I am looking forward to is installing some brake ducting. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

10-20-2011, 09:21 PM	#155 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	I have nothing informative to contribute to this thread, but I hate Red_Zed so here I am. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My new HPS post MAF tubes installed	Azroadster	Intake/Exhaust	423	08-22-2016 10:31 PM
[FOR SALE] AFE dry drop ins, HPS post MAF tubes	Kastley85891	Parts for sale (Private Classifieds)	2	05-09-2011 09:03 PM
[FOR SALE] Cobb Post MAF tubes and K&N Drop in's	Dembflyr	Parts for sale (Private Classifieds)	1	04-26-2011 07:23 PM
FS new HPS post MAF tubes	azn370z	North West Region	0	03-14-2011 10:49 PM
WTB: COBB post-Maf tubes - Black	kielbasa16	Parts for sale (Private Classifieds)	10	07-29-2010 10:05 AM