Annoying Rattling

NismoZ370 · 11-27-2011, 09:33 PM

its probably the same thing on my nismo the metal beam a little further back from the y-pipe section. i put 4 washers on each bolt in between the metal bar and the car and its perfect gave me about 1/2" - 1" gap no more annoying rattle.

mrcoolguyface · 01-20-2012, 02:56 PM

Does anyone have any pictures of this brace that the washers are going on??

NismoZ370 · 01-20-2012, 04:20 PM

It's black flat piece of metal right in front of the wheels you can't miss it. I don't have pics though

Gawl128 · 09-21-2012, 03:01 PM

Does this seem to be a problem with all full cbe exhaust or just one that sit closer to this "brace"?

cheshirecat · 09-22-2012, 06:12 PM

Only certain brands.

RITDR · 09-24-2012, 11:34 PM

The brace you are looking for is the black brace that is near the rear-center of the car. You can see it really well in this pic (found online). There are (4) bolts that attach the front of this brace that can have washers added to give the exhaust more clearance in this area.

I personally used (3) stainless fender washers under each of these bolts this weekend, and it made a HUGE improvement in the rattle issue I was having. I honestly think my Ark DTS was resting on this brace slightly after I added Berk HFC's. It rattled a ton and basically sounded like crap until I added the washers. Now I love to drive my car again!

DEpointfive0 · 09-24-2012, 11:49 PM

Quote:

Originally Posted by NismoZ370

Hell yea i was going to wrap the exhaust but the washers sounds great! what size does anyone know?

I wrapped the exhaust and put high temp rubber on the cross member, worked like a charm!

Evidently the Berk HFC's are too long and cause the exhaust to sit just a BIT too low to the cross member

One of out local guys said he jacked the car up, put 2 jackstands (1 per each exhaust tube) under the exhaust and lowered the car just a BIT, bent the pipes up a hair, problem solved. he's done it to several Z's in our area, no complaints

Dystopia · 04-15-2013, 06:56 PM

Installed my Berk HFC/CBE setup and have this problem. Glad I found this thread! I will do the washer trick this weekend. Wish I had known this would be an issue or I would have fixed it during installation.

Wabbyyy · 04-15-2013, 07:27 PM

It could be the hangers that hold your exhaust together.

Huck · 04-16-2013, 11:22 AM

I may have to try this, sometimes when I hit a certain rpm I get a nasty rattle for a second, I thought maybe it was a heat shield that was vibrating.

Sent from my iPizzle using magic and new-fangled science stuff

LostSol · 04-16-2013, 03:16 PM

I had that too Huck, turned out to be my license plate rattling against the body! Only happened from 3600-3900 rpm.

gotchu99 · 04-16-2013, 03:46 PM

An easy fix that I did for my Berk cbe was to take some pipe clamps and put them over the rubber grommets on the hangers and crank them tight. A jack was used to lift the exhaust prior to tightening them up. It gave me a fingers width clearance from the brace and has been good now for the past 6 months.

Dystopia · 04-17-2013, 09:56 PM

Quote:

Originally Posted by gotchu99

An easy fix that I did for my Berk cbe was to take some pipe clamps and put them over the rubber grommets on the hangers and crank them tight. A jack was used to lift the exhaust prior to tightening them up. It gave me a fingers width clearance from the brace and has been good now for the past 6 months.

Thanks for the input! This IMO is a better fix than adding washers to the cross member bolts....

Dystopia · 04-19-2013, 01:56 PM

Quote:

Originally Posted by gotchu99

An easy fix that I did for my Berk cbe was to take some pipe clamps and put them over the rubber grommets on the hangers and crank them tight. A jack was used to lift the exhaust prior to tightening them up. It gave me a fingers width clearance from the brace and has been good now for the past 6 months.

I just finished doing exactly as you described and it worked to perfection!! A quick 20 min fix and no more rattles for me!!! Thanks again!

Huck · 04-19-2013, 03:27 PM

Quote:

Originally Posted by LostSol

I had that too Huck, turned out to be my license plate rattling against the body! Only happened from 3600-3900 rpm.

I have been wondering about that too, although it sounds like its coming from under the car. I'll do some 3M double tape and stick it on there, then see if that fixes it.

Sent from my iPizzle using magic and new-fangled science stuff

01-20-2012, 02:56 PM	#17 (permalink)
mrcoolguyface Track Member Join Date: Sep 2011 Location: Philadelphia Posts: 553 Drives: 15 Nissan 370Z GM M6 Rep Power: 15	Does anyone have any pictures of this brace that the washers are going on?? __________________ [B] [PROJECT VERONIKA][Sport][K&N-Typhoons][Matte black vinyl roof wrap][MODSHACK inspired custom phone mount][GTR Red button] [F.I. CBE][F.I. NR-TP]

09-24-2012, 11:34 PM	#21 (permalink)
RITDR Base Member Join Date: May 2009 Location: Ohio Posts: 83 Drives: 2012 MB 370Z Rep Power: 16	The brace you are looking for is the black brace that is near the rear-center of the car. You can see it really well in this pic (found online). There are (4) bolts that attach the front of this brace that can have washers added to give the exhaust more clearance in this area. I personally used (3) stainless fender washers under each of these bolts this weekend, and it made a HUGE improvement in the rattle issue I was having. I honestly think my Ark DTS was resting on this brace slightly after I added Berk HFC's. It rattled a ton and basically sounded like crap until I added the washers. Now I love to drive my car again! iamrawr likes this.

04-15-2013, 07:27 PM	#24 (permalink)
Wabbyyy Base Member Join Date: Feb 2013 Location: New Jersey Age: 31 Posts: 126 Drives: 2009 370z Rep Power: 12	It could be the hangers that hold your exhaust together. __________________ 2009 370z.

04-16-2013, 11:22 AM	#25 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	I may have to try this, sometimes when I hit a certain rpm I get a nasty rattle for a second, I thought maybe it was a heat shield that was vibrating. Sent from my iPizzle using magic and new-fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

04-16-2013, 03:16 PM	#26 (permalink)
LostSol Premium Member Join Date: Jan 2013 Location: Orlando Posts: 1,021 Drives: 2010 370z 40th A.E. Rep Power: 15	I had that too Huck, turned out to be my license plate rattling against the body! Only happened from 3600-3900 rpm. __________________ 2010 Nissan 370Z 40th Anniversary Edition #762/1000 \| Forgestar \| Michelin \| Swift \| TRS \| Z Speed \| ARK \| Z1 \| Hawk \| CFE \| Evo-R \| GTMat \| Stillen \| Seibon \| Whiteline \| Pioneer \|

11-27-2011, 09:33 PM	#16 (permalink)
NismoZ370 Track Member Join Date: Nov 2010 Location: Clarksville, TN Posts: 711 Drives: a GTR soon! Rep Power: 16	its probably the same thing on my nismo the metal beam a little further back from the y-pipe section. i put 4 washers on each bolt in between the metal bar and the car and its perfect gave me about 1/2" - 1" gap no more annoying rattle.

01-20-2012, 04:20 PM	#18 (permalink)
NismoZ370 Track Member Join Date: Nov 2010 Location: Clarksville, TN Posts: 711 Drives: a GTR soon! Rep Power: 16	It's black flat piece of metal right in front of the wheels you can't miss it. I don't have pics though

09-21-2012, 03:01 PM	#19 (permalink)
Gawl128 Base Member Join Date: Jul 2012 Location: Florida Posts: 191 Drives: 2011 370Z Nismo Rep Power: 730	Does this seem to be a problem with all full cbe exhaust or just one that sit closer to this "brace"?

09-22-2012, 06:12 PM	#20 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 292	Only certain brands.

04-15-2013, 06:56 PM	#23 (permalink)
Dystopia Base Member Join Date: Mar 2013 Location: NJ Posts: 48 Drives: 12' VW GTI Rep Power: 12	Installed my Berk HFC/CBE setup and have this problem. Glad I found this thread! I will do the washer trick this weekend. Wish I had known this would be an issue or I would have fixed it during installation.

04-16-2013, 03:46 PM	#27 (permalink)
gotchu99 Base Member Join Date: Feb 2011 Location: ny Posts: 86 Drives: '09 370z black mt, Rep Power: 14	An easy fix that I did for my Berk cbe was to take some pipe clamps and put them over the rubber grommets on the hangers and crank them tight. A jack was used to lift the exhaust prior to tightening them up. It gave me a fingers width clearance from the brace and has been good now for the past 6 months. Dystopia likes this. Last edited by gotchu99; 04-16-2013 at 03:50 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Windshield Replaced Now Rattling	ddvette9	Exterior & Interior	4	09-07-2011 06:01 PM
Rattling noise	bitemarks	Nissan 370Z General Discussions	13	08-19-2011 02:44 PM
Rattling in the rear??? (interior)	CFZ	Exterior & Interior	3	08-12-2011 05:42 PM
Annoying Gas pedal	Mr_Z	Nissan 370Z General Discussions	12	07-20-2009 12:25 PM