Stillen intake rattling problem?

Crash · 05-30-2009, 10:24 PM

My friend has a crap load of air powered tools. I know he's got something to cut with there... I'd likely do the install in his driveway. LOL

juld0zer · 01-28-2014, 09:36 PM

it's roughly 10-12 x 60mm that needs to be removed.

i used a Dremel bit that resembles a drill bit, except it's designed to cut rather than bore holes. from memory, it was bit #561.
cutting the plastic was a piece of cake.

if you cut a bit extra, say 14 x 60mm then you can wedge some high density foam as a cushion. i used EVA 75.

i also used the same foam to prevent any rattles from occurring due to the cables near the piping. the foam should also prevent the AC lines from
being eaten up too.

05-30-2009, 10:24 PM	#31 (permalink)
Crash A True Z Fanatic Join Date: Dec 2008 Location: Los Angeles Posts: 1,853 Drives: 02 Corvette Z06 Rep Power: 589	My friend has a crap load of air powered tools. I know he's got something to cut with there... I'd likely do the install in his driveway. LOL __________________ 2002 Corvette Z06 - Totaled 2003 Corvette Z06 50th Anniversary

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 01:41 PM
Stillen Dual Air Intake Kit.	doktor	Canada	8	05-21-2009 01:11 AM
Stillen Gen III ultra long intake?	jimmy99	Engine & Drivetrain	18	05-04-2009 08:53 AM
Slight problem after installing G3 intake!	Darkaeon	Intake/Exhaust	17	04-24-2009 02:37 PM
Stillen Intake for VQ37VHR	vdcoff	Intake/Exhaust	7	01-25-2009 04:27 PM

01-28-2014, 09:36 PM	#32 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 139	it's roughly 10-12 x 60mm that needs to be removed. i used a Dremel bit that resembles a drill bit, except it's designed to cut rather than bore holes. from memory, it was bit #561. cutting the plastic was a piece of cake. if you cut a bit extra, say 14 x 60mm then you can wedge some high density foam as a cushion. i used EVA 75. i also used the same foam to prevent any rattles from occurring due to the cables near the piping. the foam should also prevent the AC lines from being eaten up too.