Berk Technology Cat-Back Coming Soon!

LiquidZ · 05-06-2009, 04:25 PM

I'm fairly confident Berk will match if not exceed Stillen.

BerkTech · 05-06-2009, 04:39 PM

When I say true dual I mean two dual pipes with no interaction between the two. The deciding factor on which one we will produce will be power production & sound. The exhaust will be a dual 2.5" design. That picture of the front section of the exhaust is two separate pipes, the rear of the car will use two separate mufflers.

Adding an X-pipe or balance tube will usually GAIN power and reduce sound. At worst they will have no effect on power but will help to quiet down the system.

Solismo - 90% of our 370Z will transfer over to the G37. Once we finish this up we will jump right into the G37.

LiquidZ - What you see in the picture is a mild steel prototype. Nobody prototypes in stainless because of all of the material that we scrap in the process.

Semtex -We would love to do a back to back comparison.

LiquidZ · 05-06-2009, 04:55 PM

Quote:

Originally Posted by BerkTech

When I say true dual I mean two dual pipes with no interaction between the two. The deciding factor on which one we will produce will be power production & sound. The exhaust will be a dual 2.5" design. That picture of the front section of the exhaust is two separate pipes, the rear of the car will use two separate mufflers.

Adding an X-pipe or balance tube will usually GAIN power and reduce sound. At worst they will have no effect on power but will help to quiet down the system.

Solismo - 90% of our 370Z will transfer over to the G37. Once we finish this up we will jump right into the G37.

LiquidZ - What you see in the picture is a mild steel prototype. Nobody prototypes in stainless because of all of the material that we scrap in the process.

Semtex -We would love to do a back to back comparison.

Do you know what steel you will end up using? I understand the reason for using the mild steel.

SoCal 370Z · 05-06-2009, 05:11 PM

Quote:

Originally Posted by BerkTech

Adding an X-pipe or balance tube will usually GAIN power and reduce sound. At worst they will have no effect on power but will help to quiet down the system.

Yes, please. Balance tube.

RCZ · 05-06-2009, 07:07 PM

Make it loud

Im awaiting the results too

semtex · 05-06-2009, 07:10 PM

I want it to sound like the SACLAM exhaust.

RCZ · 05-06-2009, 07:14 PM

I'd prefer a higher pitched shriek than a lower grumble...

semtex · 05-06-2009, 07:31 PM

I just want my exhaust note to make babies cry. I was parked next to a car yesterday where this lady was strapping her baby into the baby seat. I fired up my Z, and the baby didn't cry. That's just wrong. (j/k - sorta)

frost · 05-06-2009, 07:32 PM

I want people to have to cover their ears when I drive them

DannyGT · 05-06-2009, 08:16 PM

I had one of THE loudest exhausts with my scooby, I mean I loved it, it was brutal in the best way possible but you know what I'm done with that...if it sounds smooth and euro like the AMUSE exhaust I'd be happy.

RCZ · 05-06-2009, 08:24 PM

Quote:

Originally Posted by DannyGT

I had one of THE loudest exhausts with my scooby, I mean I loved it, it was brutal in the best way possible but you know what I'm done with that...if it sounds smooth and euro like the AMUSE exhaust I'd be happy.

Exactly. I want smooth, loud and high.

PS: Did you have a nur spec?

I had an invidia G200 on mine

/threadjack

DannyGT · 05-06-2009, 08:41 PM

No, I was sporting the Kakimoto GT1.0Z - it was REDICULOUSLY lightweight and equally loud!

At all the meets and any events - everyone knew my car! HAHA

ZforMe · 05-06-2009, 09:07 PM

Quote:

Originally Posted by semtex

I want it to sound like the SACLAM exhaust.

I agree with Semtex, if it sounds anywhere near this, I'm buying.

Minicobra1 · 05-06-2009, 09:51 PM

Yeah, the Saclam is really unique sounding b/c of the design, but it's also really pricey. I think it's a bit too loud for the street, I really don't want to attract that much attention when I get on it. There is a bit of an echo in that vid, I wish I could hear it outside, and not in the service bay.

Keep in mind that once you ad the HFC's it really increases the sound level, if you start off too loud, it will be incredibly loud when the HFC's are added to the mix.

As far as H-Pipe vs. Y, vs. X-pipe, my personal choice would be X, but my only experience with exhaust is limited to V8 cars. My 2 Mustangs ran the X-pipes and made the most HP & Torque with this system. But the VQ is a completely different engine, although it it still a V configuration.

Another thing I'd vote for is more Torque vs. Max HP, (to a point) at least from a street car perspective. I'm rarely up in the 7500 rpm range on the street, so having a little more usable torque down low, would make the car more enjoyable to drive.

I found this clip of a G37, not sure who makes the exhaust, but thought it sounded pretty good.

I'm sure whatever Berk comes up with will be awesome

DannyGT · 05-06-2009, 10:01 PM

That looks so ugly tho...it screams custom w/ no taste.

05-06-2009, 04:25 PM	#31 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 704	I'm fairly confident Berk will match if not exceed Stillen. __________________

05-06-2009, 04:39 PM	#32 (permalink)
BerkTech The370Z.com Sponsor Join Date: Jan 2009 Location: Irvine CA Posts: 279 Drives: Lots.... Rep Power: 272	When I say true dual I mean two dual pipes with no interaction between the two. The deciding factor on which one we will produce will be power production & sound. The exhaust will be a dual 2.5" design. That picture of the front section of the exhaust is two separate pipes, the rear of the car will use two separate mufflers. Adding an X-pipe or balance tube will usually GAIN power and reduce sound. At worst they will have no effect on power but will help to quiet down the system. Solismo - 90% of our 370Z will transfer over to the G37. Once we finish this up we will jump right into the G37. LiquidZ - What you see in the picture is a mild steel prototype. Nobody prototypes in stainless because of all of the material that we scrap in the process. Semtex -We would love to do a back to back comparison. __________________ While the others type fast... Berk Technology goes fast.... See you at the track! OUR NEW PHONE NUMBER: (714) 546-BERK READ THE BERK BLOG HERE

05-06-2009, 07:10 PM	#36 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	I want it to sound like the SACLAM exhaust. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

05-06-2009, 07:31 PM	#38 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	I just want my exhaust note to make babies cry. I was parked next to a car yesterday where this lady was strapping her baby into the baby seat. I fired up my Z, and the baby didn't cry. That's just wrong. (j/k - sorta) __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf. Last edited by semtex; 05-06-2009 at 07:33 PM.

05-06-2009, 08:16 PM	#40 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	I had one of THE loudest exhausts with my scooby, I mean I loved it, it was brutal in the best way possible but you know what I'm done with that...if it sounds smooth and euro like the AMUSE exhaust I'd be happy. __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold)

05-06-2009, 07:07 PM	#35 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Make it loud Im awaiting the results too

05-06-2009, 07:14 PM	#37 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	I'd prefer a higher pitched shriek than a lower grumble...

05-06-2009, 07:32 PM	#39 (permalink)
frost Retired admin Join Date: Dec 2008 Location: Winterfell Posts: 106,613 Drives: Your Wife Crazy Rep Power: 0	I want people to have to cover their ears when I drive them

05-06-2009, 08:41 PM	#42 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	No, I was sporting the Kakimoto GT1.0Z - it was REDICULOUSLY lightweight and equally loud! At all the meets and any events - everyone knew my car! HAHA __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold)

05-06-2009, 09:51 PM	#44 (permalink)
Minicobra1 A True Z Fanatic Join Date: Nov 2008 Location: Orange County, CA. Posts: 1,205 Drives: 370Z Tour, Spt, 6mt Rep Power: 644	Yeah, the Saclam is really unique sounding b/c of the design, but it's also really pricey. I think it's a bit too loud for the street, I really don't want to attract that much attention when I get on it. There is a bit of an echo in that vid, I wish I could hear it outside, and not in the service bay. Keep in mind that once you ad the HFC's it really increases the sound level, if you start off too loud, it will be incredibly loud when the HFC's are added to the mix. As far as H-Pipe vs. Y, vs. X-pipe, my personal choice would be X, but my only experience with exhaust is limited to V8 cars. My 2 Mustangs ran the X-pipes and made the most HP & Torque with this system. But the VQ is a completely different engine, although it it still a V configuration. Another thing I'd vote for is more Torque vs. Max HP, (to a point) at least from a street car perspective. I'm rarely up in the 7500 rpm range on the street, so having a little more usable torque down low, would make the car more enjoyable to drive. I found this clip of a G37, not sure who makes the exhaust, but thought it sounded pretty good. I'm sure whatever Berk comes up with will be awesome __________________ 370z Tour\| Spt Pack\|Navi\|BERK CBE\|Berk HFC's\| Eibach Springs\| Hotchkis Sway Bars\|SPC Camber Arms\|15mm Ichiba Wheel Spacers\| 19"Factory Nismo Wheels-Matt Black\|Stop Tech Rotors\|TWM Shifter\|3M Tint\|Black Fangs\|Black Rear Valance\|JDM Fog Light\| MY BAND-www.myspace.com/petroleum

05-06-2009, 10:01 PM	#45 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	That looks so ugly tho...it screams custom w/ no taste. __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Berk Technology HFC Install	M.Bonanni	DIY Section (Do-It-Yourself)	203	08-03-2018 05:12 AM
Berk Technology HFCs gain +19whp + 18wtq!	M.Bonanni	Intake/Exhaust	73	08-13-2010 09:52 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 12:41 PM
Coming back to the Z	BurntGauge	New Forum Member	9	03-11-2009 08:25 PM