popchargers vs. stillen gen 3

quicksilver08 · 08-28-2011, 07:21 PM

Is there any proof that the stillen makes more power and runs faster down the 1/4 mile than the JWT popchargers? I don't mind spending the money again if ill see a gain but if not then ill save the money for a tune.

Methodical4u · 08-28-2011, 08:00 PM

have you run the 1/4 yet with current mods?

quicksilver08 · 08-28-2011, 08:37 PM

Not yet. Want to get it tuned first then ill go. Just curious.

Methodical4u · 08-29-2011, 12:01 AM

Quote:

Originally Posted by quicksilver08

Not yet. Want to get it tuned first then ill go. Just curious.

I really don't know much about the pop chargers, but i'd be curious to see your results when you run or get it dynoed.

quicksilver08 · 08-29-2011, 07:18 AM

Basically just a chrome tube ending with an open filter in the factory location. Nothing special.

Methodical4u · 08-29-2011, 01:15 PM

Quote:

Originally Posted by quicksilver08

Basically just a chrome tube ending with an open filter in the factory location. Nothing special.

The G37's seem to respond better to those types of systems because of how much more open they are in the front, so if it made a BIG difference then i'd be quite surprised.

theDreamer · 08-29-2011, 01:20 PM

The Stillen system will pull in cold air while the pop charger will initially pull in cold air but the moment the engine bay warms up you will be sucking in hot air.

b1adesofcha0s · 08-29-2011, 01:22 PM

Yeah from this review I read, it seems that the pop chargers gained only about 4 whp and 2 lb/ft of TQ. Stillens are definitely better.

Masa · 08-29-2011, 01:43 PM

Agree with what everyone here says, G3's are the best for top end.

If you are gonna spend $300 on the JWT pop chargers (a waste imo) you are better off dropping $200 on some K&N drop-in panels and silicone post-MAF tubes. Next best thing to Stillen/Injen CAI's.

Z eliminator · 08-29-2011, 02:24 PM

The 2 quickist cars in the 1/4 mile are Jnaut, 12.24 and Z Eliminator 12.42.
J's is a 6MT and Z's is a 7AT.
we both run the stillen G3 .
Mine made 20 rwhp with the bumper on the car on the stock nissan fuel curve/
and thats SAE rwhp.
Z

Methodical4u · 08-29-2011, 03:45 PM

I can't agree with everyone here... the R2C's made the same power as the G3's on a G37 and they aren't true CAI's... sadly, there isn't a dyno of them on the 370z. I don't think it would make the same power.

quicksilver08 · 08-29-2011, 09:38 PM

I paid a $100 for my popchargers so no big loss haha.

TonyBPD · 08-29-2011, 10:09 PM

I'm happy with my R2C's. No dyno right now but will be doing one in late September.

Methodical4u · 08-29-2011, 11:19 PM

Quote:

Originally Posted by TonyBPD

I'm happy with my R2C's. No dyno right now but will be doing one in late September.

well THANK YOU!!! about time someone did one... although I know it's expensive to get the parts and dyno them.. reps for that, PLEASE PLEASE post the results. It's such a nice system, i'd love to believe that it does well with power.

quicksilver08 · 08-30-2011, 06:53 AM

There's a thread on myg37.com comparing stillen and the r2c.

08-28-2011, 07:21 PM	#1 (permalink)
quicksilver08 Base Member Join Date: Jul 2011 Location: Buda, Tx Posts: 66 Drives: 08 Infiniti G37s 6mt Rep Power: 14	popchargers vs. stillen gen 3 Is there any proof that the stillen makes more power and runs faster down the 1/4 mile than the JWT popchargers? I don't mind spending the money again if ill see a gain but if not then ill save the money for a tune. __________________ 2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys

08-28-2011, 08:37 PM	#3 (permalink)
quicksilver08 Base Member Join Date: Jul 2011 Location: Buda, Tx Posts: 66 Drives: 08 Infiniti G37s 6mt Rep Power: 14	Not yet. Want to get it tuned first then ill go. Just curious. __________________ 2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys

08-29-2011, 07:18 AM	#5 (permalink)
quicksilver08 Base Member Join Date: Jul 2011 Location: Buda, Tx Posts: 66 Drives: 08 Infiniti G37s 6mt Rep Power: 14	Basically just a chrome tube ending with an open filter in the factory location. Nothing special. __________________ 2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys

08-29-2011, 01:20 PM	#7 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	The Stillen system will pull in cold air while the pop charger will initially pull in cold air but the moment the engine bay warms up you will be sucking in hot air. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

08-29-2011, 01:22 PM	#8 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Yeah from this review I read, it seems that the pop chargers gained only about 4 whp and 2 lb/ft of TQ. Stillens are definitely better. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

08-28-2011, 08:00 PM	#2 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 16	have you run the 1/4 yet with current mods?

08-29-2011, 01:43 PM	#9 (permalink)
Masa A True Z Fanatic Join Date: Feb 2011 Location: Annapolis, MD Posts: 2,237 Drives: Family Cars Rep Power: 20	Agree with what everyone here says, G3's are the best for top end. If you are gonna spend $300 on the JWT pop chargers (a waste imo) you are better off dropping $200 on some K&N drop-in panels and silicone post-MAF tubes. Next best thing to Stillen/Injen CAI's. __________________ BMW 340i Jeep Cherokee Trailhawk

08-29-2011, 02:24 PM	#10 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	The 2 quickist cars in the 1/4 mile are Jnaut, 12.24 and Z Eliminator 12.42. J's is a 6MT and Z's is a 7AT. we both run the stillen G3 . Mine made 20 rwhp with the bumper on the car on the stock nissan fuel curve/ and thats SAE rwhp. Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

08-29-2011, 03:45 PM	#11 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 16	I can't agree with everyone here... the R2C's made the same power as the G3's on a G37 and they aren't true CAI's... sadly, there isn't a dyno of them on the 370z. I don't think it would make the same power.

08-29-2011, 09:38 PM	#12 (permalink)
quicksilver08 Base Member Join Date: Jul 2011 Location: Buda, Tx Posts: 66 Drives: 08 Infiniti G37s 6mt Rep Power: 14	I paid a $100 for my popchargers so no big loss haha. __________________ 2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys

08-29-2011, 10:09 PM	#13 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 17	I'm happy with my R2C's. No dyno right now but will be doing one in late September. __________________ Fast Intentions-Stillen-Avant Garde-UpRev-319hp/265tq- Gone but will never be forgotten

08-30-2011, 06:53 AM	#15 (permalink)
quicksilver08 Base Member Join Date: Jul 2011 Location: Buda, Tx Posts: 66 Drives: 08 Infiniti G37s 6mt Rep Power: 14	There's a thread on myg37.com comparing stillen and the r2c. __________________ 2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
[FOR SALE] Complete JWT PopChargers ________	kday	Parts for sale (Private Classifieds)	3	07-08-2011 03:14 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 01:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 06:20 PM
independent dyno for JWT popchargers anyone?	mattkim85	Intake/Exhaust	1	04-01-2009 08:23 PM