Injen intake caused s-mode to turn off

Dingo · 08-22-2011, 09:23 PM

Just installed my new injen intake, and doing so turned off my s mode. Right when I started the car, it made a loud beep. Then when driving, realized that the s mode was off and wouldn't turn on. Checked here for help and found nothing like my situation. I found one post about the hazard lights working but not the s mode. So I went to try my hazards and they are out too. The OEM washer fluid bottle had a hook up for a sensor that I'm guessing monitors the washer fluid level. This was not reconnected to the injen fluid tank. Wondering if this might be causing the problem?? Any thoughts from the Gurus out there???

Thanks

Trips · 08-22-2011, 09:37 PM

That empty connector is for the washer fluid level and should not be related to your problem. Try looking at the fuses and see if by any chance one is blown?

Dingo · 08-22-2011, 10:12 PM

Will do, thanks. Anyone else?

geosZ · 08-22-2011, 10:34 PM

No the washer fluid should not b your problem. I dint install it either.

Dingo · 08-24-2011, 05:28 PM

For all those who tried to help.…I'm sorry! Pulled every fuse and still nothing! Stupid hunch, looked at the harness under the shifter and BANG! must not have "clicked" the harness back in when I installed my bubble knob. Sorry to Injen, the intake is amazing! Instant power!!! Great sound! Thanks anyway Triples

SPOHN · 08-24-2011, 06:17 PM

I guess you made a Dingo.

Trips · 08-24-2011, 07:27 PM

Great to hear thats all it was.

Dingo · 08-25-2011, 08:26 AM

RE: Spohn: That's what I say when have a hard fart!!!

08-22-2011, 09:23 PM	#1 (permalink)
Dingo Base Member Join Date: Jul 2011 Location: Kutztown, PA Posts: 5 Drives: 2010 Sp Platinum 6MT Rep Power: 14	Injen intake caused s-mode to turn off Just installed my new injen intake, and doing so turned off my s mode. Right when I started the car, it made a loud beep. Then when driving, realized that the s mode was off and wouldn't turn on. Checked here for help and found nothing like my situation. I found one post about the hazard lights working but not the s mode. So I went to try my hazards and they are out too. The OEM washer fluid bottle had a hook up for a sensor that I'm guessing monitors the washer fluid level. This was not reconnected to the injen fluid tank. Wondering if this might be causing the problem?? Any thoughts from the Gurus out there??? Thanks

08-22-2011, 09:37 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	That empty connector is for the washer fluid level and should not be related to your problem. Try looking at the fuses and see if by any chance one is blown? __________________

08-22-2011, 10:34 PM	#4 (permalink)
geosZ Track Member Join Date: Mar 2011 Location: queens ny Posts: 623 Drives: 2012 wrx Sti ice S. Rep Power: 15	No the washer fluid should not b your problem. I dint install it either. __________________ ark cbe R.I.P.°berk test pipes°red injen cai°180 lights°eibach springs°spacers°pioneer navi/dvd°stillen splitter°carbonsignal fenders°xxr 527 wheels•momo Italy floor mats•weapon R 4 point Raceing harness. SOLD. NEW CAR 2012 Subaru Sti sedan ice silver.

08-24-2011, 06:17 PM	#6 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I guess you made a Dingo. __________________

08-24-2011, 07:27 PM	#7 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Great to hear thats all it was. __________________

08-22-2011, 10:12 PM	#3 (permalink)
Dingo Base Member Join Date: Jul 2011 Location: Kutztown, PA Posts: 5 Drives: 2010 Sp Platinum 6MT Rep Power: 14	Will do, thanks. Anyone else?

08-24-2011, 05:28 PM	#5 (permalink)
Dingo Base Member Join Date: Jul 2011 Location: Kutztown, PA Posts: 5 Drives: 2010 Sp Platinum 6MT Rep Power: 14	For all those who tried to help.…I'm sorry! Pulled every fuse and still nothing! Stupid hunch, looked at the harness under the shifter and BANG! must not have "clicked" the harness back in when I installed my bubble knob. Sorry to Injen, the intake is amazing! Instant power!!! Great sound! Thanks anyway Triples

08-25-2011, 08:26 AM	#8 (permalink)
Dingo Base Member Join Date: Jul 2011 Location: Kutztown, PA Posts: 5 Drives: 2010 Sp Platinum 6MT Rep Power: 14	RE: Spohn: That's what I say when have a hard fart!!! Last edited by Dingo; 08-25-2011 at 10:29 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Injen intake	tonmed123	Intake/Exhaust	0	05-15-2011 01:45 PM
370z Injen Speed Pro Series Intake \| AEM ETI Intake stupid pricing	Tunerz_Store	Exhaust/Intake	11	11-01-2010 02:43 PM
Injen Intake	ncheung85	Intake/Exhaust	14	07-12-2010 09:59 AM
Injen cold air intake	JimZ	Intake/Exhaust	8	03-21-2010 09:50 PM