Any suggestion on selecting a dual cold air intake?

BajaZ · 07-23-2011, 04:25 PM

OK .. i want to put an intake on my 370z .. its a 2011 what do you suggest..?
HKS.. Injen.. or Takeda? .. and why? im looking for someone that does not drone..

red6spd · 07-23-2011, 04:30 PM

Stillen G3. No chance of water ingestion (unless you drive into the ocean) has been proven time after time to give the best gains, sounds and looks great, very good quality. Also I think if you buy them from Z1 you can have them powder coated in what ever color you want.

weezal657 · 07-23-2011, 04:34 PM

I would also agree about the G3, but I would also suggest doing a search for all of those intakes on this forum and you will find a wealth of information enough to make up your own mind. Also this same topic has come up numerous times so that information is there, you just have to do some work and do some research of your own. But, good luck and G3 is normally what everyone recommends.

Red__Zed · 07-23-2011, 04:43 PM

stillen is the only intake worth considering IMO

Methodical4u · 07-23-2011, 04:51 PM

I did a lot of research, but the stillen does indeed beat out all the others. If you don't want to go the long tube route then K&N drop-ins with post maf tubes is the best and cheapest way to go, though you supposedly will not get the power at the top of the RPM range like the stillen provides.

shadoquad · 07-23-2011, 05:15 PM

Everybody says Stillen is better by miles, but I disagree. If it is better than the Injens, it's only by a very small amount.

There's a lot of Stillen kool aid on this forum. And a lot of fearmongering about the rare cases of hardship with the Injens. Just do your own research and don't believe the incredible and top-heavy pile of hype.

shadoquad · 07-23-2011, 05:34 PM

In fact, if you want more detailed information on the "problem" with Injen, read this thread, which also discusses easy and cheap fixes.

anyone else having rain issues with injen cold air?

Arkaine · 07-23-2011, 05:53 PM

Quote:

Originally Posted by red6spd

Stillen G3. No chance of water ingestion (unless you drive into the ocean) has been proven time after time to give the best gains, sounds and looks great, very good quality. Also I think if you buy them from Z1 you can have them powder coated in what ever color you want.

Quote:

Originally Posted by weezal657

I would also agree about the G3,

Quote:

Originally Posted by Red__Zed

stillen is the only intake worth considering IMO

Not to highjack the thread (hopefully add to it), but will I still see gains with the Stillen G3 and using the stock exhaust? I understand it won't be as effective because you want the car to be able to exhale, but I really don't want an aftermarket exhaust.

shadoquad · 07-23-2011, 05:59 PM

Quote:

Originally Posted by Arkaine

Not to highjack the thread (hopefully add to it), but will I still see gains with the Stillen G3 and using the stock exhaust? I understand it won't be as effective because you want the car to be able to exhale, but I really don't want an aftermarket exhaust.

The hp Gains advertised assume a stock exhaust setup.

Arkaine · 07-23-2011, 06:12 PM

Quote:

Originally Posted by shadoquad

The hp Gains advertised assume a stock exhaust setup.

Well then, much appreciated!!

I almost deserved a RTFM there...

christian370z · 07-23-2011, 08:07 PM

Quote:

Originally Posted by shadoquad

The hp Gains advertised assume a stock exhaust setup.

It's also been proven to show the best gains on modified cars as well, those are facts not kool-aid.

Methodical4u · 07-23-2011, 08:33 PM

Quote:

Originally Posted by shadoquad

Everybody says Stillen is better by miles, but I disagree. If it is better than the Injens, it's only by a very small amount.

There's a lot of Stillen kool aid on this forum. And a lot of fearmongering about the rare cases of hardship with the Injens. Just do your own research and don't believe the incredible and top-heavy pile of hype.

You know i felt the very same way, but looking at dyno after dyno with different set-ups the ones with stillen G3's ALL have the higher numbers. I would think the Injen's would get just as much if not more power because it seems like where they sit more cold air gets to them, but like I said so far on the research i've seen anyway the G3's show more gains.

Methodical4u · 07-23-2011, 08:42 PM

Quote:

Originally Posted by Arkaine

Not to highjack the thread (hopefully add to it), but will I still see gains with the Stillen G3 and using the stock exhaust? I understand it won't be as effective because you want the car to be able to exhale, but I really don't want an aftermarket exhaust.

I would look into the G3's and look at ART's resonated test pipes... they show more gains than high flow cats as well as any other test pipe out there but without a lot of the noise. That should get you about 20 whp total I would think... perhaps more. They are expensive, so be warned and if that doesn't interest you then Berks high flow cats a lot of people get with just the stock set-up.

One guy did just a cheap ebay Y pipe for 100.00 and the ART pipes and gained 20 whp. No other mods

Jordo! · 07-23-2011, 10:53 PM

Quote:

Originally Posted by red6spd

Stillen G3. No chance of water ingestion (unless you drive into the ocean) has been proven time after time to give the best gains, sounds and looks great, very good quality. Also I think if you buy them from Z1 you can have them powder coated in what ever color you want.

This... but, frankly smooth intake tubes (e.g., cobb) plus K&N panel filters only make slightly less power at a fraction of the cost.

If you can find the G3's used, go for it, otherwise, I'd recommend going with the alternative I noted.

djpathfinder · 07-23-2011, 10:58 PM

Stillen Gen3 >> Injen. Why change out the windshield washer reservoir? Why chance a potential water problem because the filters are placed too low? Why buy a product only to have to do a "fix", no matter how cheap, to solve a problem you don't need?

07-23-2011, 04:25 PM	#1 (permalink)
BajaZ Enthusiast Member Join Date: Jul 2011 Location: hawaii Posts: 412 Drives: 370z 2013 Black Rep Power: 15	Any suggestion on selecting a dual cold air intake? OK .. i want to put an intake on my 370z .. its a 2011 what do you suggest..? HKS.. Injen.. or Takeda? .. and why? im looking for someone that does not drone..

07-23-2011, 04:30 PM	#2 (permalink)
red6spd A True Z Fanatic Join Date: Apr 2010 Location: Long Island NY Posts: 3,277 Drives: 2010 Z Coupe M6 SPT Rep Power: 21	Stillen G3. No chance of water ingestion (unless you drive into the ocean) has been proven time after time to give the best gains, sounds and looks great, very good quality. Also I think if you buy them from Z1 you can have them powder coated in what ever color you want. __________________ 2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness. ???Whp ???WTQ (Will find out come spring time)

07-23-2011, 05:15 PM	#6 (permalink)
shadoquad A True Z Fanatic Join Date: Apr 2010 Location: . Posts: 42,608 Drives: . Rep Power: 3886	Everybody says Stillen is better by miles, but I disagree. If it is better than the Injens, it's only by a very small amount. There's a lot of Stillen kool aid on this forum. And a lot of fearmongering about the rare cases of hardship with the Injens. Just do your own research and don't believe the incredible and top-heavy pile of hype. Last edited by shadoquad; 07-23-2011 at 05:19 PM.

07-23-2011, 10:58 PM	#15 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	Stillen Gen3 >> Injen. Why change out the windshield washer reservoir? Why chance a potential water problem because the filters are placed too low? Why buy a product only to have to do a "fix", no matter how cheap, to solve a problem you don't need? __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AEM dual cold air intake (long tube)	Marco_xyz	Intake/Exhaust	177	10-16-2011 12:17 AM
[FOR SALE] K&N Dual Typhoon cold air intake	QueenZ	Parts for sale (Private Classifieds)	1	06-18-2011 10:34 AM
Injen Dual Cold Air Intake K&N filter replacment?	Valentino	Intake/Exhaust	2	06-17-2011 12:08 AM

07-23-2011, 04:34 PM	#3 (permalink)
weezal657 Base Member Join Date: Jun 2011 Location: MD Posts: 51 Drives: 09' 370Z PG Touring Rep Power: 14	I would also agree about the G3, but I would also suggest doing a search for all of those intakes on this forum and you will find a wealth of information enough to make up your own mind. Also this same topic has come up numerous times so that information is there, you just have to do some work and do some research of your own. But, good luck and G3 is normally what everyone recommends.

07-23-2011, 04:43 PM	#4 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	stillen is the only intake worth considering IMO

07-23-2011, 04:51 PM	#5 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 16	I did a lot of research, but the stillen does indeed beat out all the others. If you don't want to go the long tube route then K&N drop-ins with post maf tubes is the best and cheapest way to go, though you supposedly will not get the power at the top of the RPM range like the stillen provides.

07-23-2011, 05:34 PM	#7 (permalink)
shadoquad A True Z Fanatic Join Date: Apr 2010 Location: . Posts: 42,608 Drives: . Rep Power: 3886	In fact, if you want more detailed information on the "problem" with Injen, read this thread, which also discusses easy and cheap fixes. anyone else having rain issues with injen cold air?