Has anyone installed Stillen G3s from a 350Z HR?

98intrigue · 06-20-2011, 03:17 PM

Reason why I ask...I bought my Stillen G3s used from a 350Z HR owner. I installed them on my car without a problem. I sold them to a forum member on here after I did the single turbo on my car. I was unaware that there was any difference between the G3s for a 350Z HR vs a 370Z...therefore I didn't know I had the 350Z Stillen G3s. The guy I sold them to is having a problem installing them and I'm trying to help him figure out how to install them.

If anyone has installed them, do you have pictures of them installed? Specifically with the front bumper off?

daisuke149 · 06-20-2011, 03:42 PM

maybe descsribe the problem and we can help out. otherwise i do not know of anyone who has done it.

98intrigue · 06-20-2011, 03:53 PM

Quote:

Originally Posted by daisuke149

maybe descsribe the problem and we can help out. otherwise i do not know of anyone who has done it.

Oops. I left that part out. The middle piping looks to be 2-3 inches shorter on the 350Z HR kit compared to the 370Z kit according to the pictures the buyer sent me. Like I said, I was unaware I had a 350Z specific kit and the kit fit fine on my car. I'm just trying to help the buyer figure out why he's having a problem...and pictures would be very helpful.

Nismo-Z · 06-20-2011, 04:09 PM

You can use the coupler space between the pipe and throttle body to make up for 2-3"s. Just move the pipe closer to the edge and clamp tight.

daisuke149 · 06-20-2011, 04:14 PM

yeah just slide the piping close tot he edges of the silicone coupler.

370Z JT · 07-08-2011, 07:44 PM

Didn't see this. I bought 6 inch couplers to connect the two pipes instead of the 3 inch couplers from stillen. Seem to be working fine.

98intrigue · 07-08-2011, 11:58 PM

Quote:

Originally Posted by 370Z JT

Didn't see this. I bought 6 inch couplers to connect the two pipes instead of the 3 inch couplers from stillen. Seem to be working fine.

Good! I'm glad you finally got them installed. I wish I had kept my car NA with bolt ons...

06-20-2011, 03:17 PM	#1 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	Has anyone installed Stillen G3s from a 350Z HR? Reason why I ask...I bought my Stillen G3s used from a 350Z HR owner. I installed them on my car without a problem. I sold them to a forum member on here after I did the single turbo on my car. I was unaware that there was any difference between the G3s for a 350Z HR vs a 370Z...therefore I didn't know I had the 350Z Stillen G3s. The guy I sold them to is having a problem installing them and I'm trying to help him figure out how to install them. If anyone has installed them, do you have pictures of them installed? Specifically with the front bumper off? __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

06-20-2011, 04:09 PM	#4 (permalink)
Nismo-Z Base Member Join Date: Jan 2011 Location: Charlotte Posts: 21 Drives: 11' 370z Nismo Rep Power: 14	You can use the coupler space between the pipe and throttle body to make up for 2-3"s. Just move the pipe closer to the edge and clamp tight. __________________ Stillen GEN 3 CAI \| more to come!

07-08-2011, 07:44 PM	#6 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Didn't see this. I bought 6 inch couplers to connect the two pipes instead of the 3 inch couplers from stillen. Seem to be working fine. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen 7AT coolers installed?	wstar	Engine & Drivetrain	18	09-11-2020 07:58 PM
Just installed my Stillen G3 Intakes	FastPaced	Intake/Exhaust	0	06-19-2011 12:28 AM
Stillen exhaust has been installed, and the verdict is...	craniac24	Intake/Exhaust	34	05-20-2010 02:31 PM
Installed stillen gen 3 and ...	zulus370Z	Intake/Exhaust	39	09-08-2009 09:05 AM
STILLEN 350Z on Ebay	Kyle@STILLEN	Other Vehicle For sale	4	03-26-2009 08:16 PM

06-20-2011, 03:42 PM	#2 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	maybe descsribe the problem and we can help out. otherwise i do not know of anyone who has done it.

06-20-2011, 04:14 PM	#5 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	yeah just slide the piping close tot he edges of the silicone coupler.