Berk CBE Help

Mandingo · 06-13-2011, 06:16 PM

Nice job! This was my first exhaust install too.

My driver side flex pipe was welded on a little crooked too but I was able to snug it down and it seems ok.

My passenger side tip sat higher also. I just lowered it with washers to make them even at first. Eventually I decided I wanted both tips sitting higher inside the cutouts in the bumper but was too scared to bend the hangers on the exhaust itself so.. supporting the exhaust with a jack stand, I took the driver side bracket off and bent it up instead (I picked up a spare one at Courtesy just in case I effed it up too much

). These are very easy to replace and you don't have to jack the Z up to do it.

I actually just put the thing in a vice and tightened it down until I thought the bend at the end of the bracket had straightened out enough to raise the exhaust. It could still be higher but I'm done messing with this thing for now!

b1adesofcha0s · 06-13-2011, 06:21 PM

Looks great man!

mwz516 · 06-25-2011, 01:44 PM

I had a local shop do the install I have same problem and and left tip is not straight
Also tip position is not in the middle. it is tilted to right how do i fix this?

06-13-2011, 06:16 PM	#1 (permalink)
Mandingo Track Member Join Date: Nov 2010 Location: Dallas Posts: 625 Drives: '10 370z 6spd Rep Power: 3371	Nice job! This was my first exhaust install too. My driver side flex pipe was welded on a little crooked too but I was able to snug it down and it seems ok. My passenger side tip sat higher also. I just lowered it with washers to make them even at first. Eventually I decided I wanted both tips sitting higher inside the cutouts in the bumper but was too scared to bend the hangers on the exhaust itself so.. supporting the exhaust with a jack stand, I took the driver side bracket off and bent it up instead (I picked up a spare one at Courtesy just in case I effed it up too much). These are very easy to replace and you don't have to jack the Z up to do it. I actually just put the thing in a vice and tightened it down until I thought the bend at the end of the bracket had straightened out enough to raise the exhaust. It could still be higher but I'm done messing with this thing for now! __________________ some mods

06-13-2011, 06:21 PM	#2 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 142	Looks great man! __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

06-25-2011, 01:44 PM	#3 (permalink)
mwz516 Base Member Join Date: Jun 2011 Location: Los Angeles Posts: 59 Drives: 370Z Touring CY MT Rep Power: 14	I had a local shop do the install I have same problem and and left tip is not straight Also tip position is not in the middle. it is tilted to right how do i fix this? Last edited by mwz516; 06-25-2011 at 03:44 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BERK HFCs & BERK CBE	Tallycl-s	Parts for sale (Private Classifieds)	20	10-28-2011 05:17 PM
WTB: BERK Cat Back Exhaust AND BERK HFC	HATED1	Wanted	2	09-07-2010 04:28 PM
Berk hfc/berk cbe vs berk hfc/stillen exhaust	xbigb4ller69z	Intake/Exhaust	21	04-11-2010 03:35 AM
Berk HFC or Berk Test Pipes?	bobby8621	Intake/Exhaust	16	06-24-2009 05:48 PM
Redline Time Attack Results are in! DDM 370Z, BERK S2000 & BERK BMW 135i on track!	BerkTech	Track / Autocross / Drifting / Dragstrip	8	04-02-2009 11:37 AM