Art Pipes or F.I headers

F.I. Inc. · 05-21-2011, 01:12 PM

Quote:

Originally Posted by 370Zfeeler

Still have yet to buy my 370z, but plan on doing so in the months to come, I'm doing all my due diligence ahead of getting the car, well.. I'm thinking of adding boltons + uprev tune. So far the list goes like this:

-Stillen Gen3 Intakes
-Fast Intetions 18" catback

-Motordyne Art Pipes or Fast Intentions LTH????

Opinions welcome on the setup..

I searched thru a couple of threads, havent really seen a comparision between the two, but from what I've read it all comes down to the LTH getting the job done earlier in the power band.. final numbers I think would be around the same; not to mention art pipes cost a lot less, is the extra money worth it on the LTH ?

First and foremost thank you for taking an interest in our products!

You look like you are set on our CBE so there is not really much for me to say with that but, thank you!

Now as far as comparing the ART test pipes to our long tube headers, there are alot of things to consider between the two. Purchase cost, install time and/or cost, performance & sound.

I can tell you the test pipes will cost less, are easier to install and will cost less to install. However the sound is subjective and everyone will perceive it differently. Now I can only compare our test pipes to our headers. I have never seen the ART test pipes in person nor done a dyno comparison.

What I can tell you is this, our headers combined with our CBE will give your car a very high end exotic sound. The throttle response from idle to red line is vastly improved over stock. It is beyond a night and day difference!

Again, at the end of the day there a lot of different deciding factors to consider. I am always available via telephone.

If you have any questions please do not hesitate to call me directly...

Thank you, Tony

whoady4shoady · 05-21-2011, 01:22 PM

Quote:

Originally Posted by NewYorkJon34

I def agree with your review, we have the same set-up but I have the CF exhaust which are def exotic sounding. I don't have a tune either.

Are there any vids out there comparing the CF to the SS. I just ordered my exhaust, but I opted for the SS casue I like the way it looks, but is the sound that much different?

F.I. Inc. · 05-21-2011, 01:26 PM

To all in this thread,

I have read everyones comments, some of them twice. I think there are a lot of good points.

I want to chime in a little bit.

I feel we have an edge over everyone else. Yes we are a small company but you have seen the production numbers that we have been able to produce.

I cannot think of another company where I can call up, directly deal with the owner and only the owner. That owner is also the designer and creator of my exhaust. Oh and lastly that owner is building my exhaust with his own hands. The bottom line is this. All of of our exhaust systems are manufactured in house. This is the only way to ensure quality assurance.

"Believe me when I tell you, it is physically demanding however we have worked too hard and spent too much time to put our reputation in someone else's hands".

For the record all of our headers are constructed from 304 stainless steel and than left bare or ceramic coated. I noticed in one of the comments someone stated we used steel. I just wanted to clear that up.

I am not trying to turn this into a flame war so let's not go there. However, I am encouraging any of you to call me with any questions that you may have.

Thank you, Tony

F.I. Inc. · 05-21-2011, 01:30 PM

Quote:

Originally Posted by whoady4shoady

Are there any vids out there comparing the CF to the SS. I just ordered my exhaust, but I opted for the SS casue I like the way it looks, but is the sound that much different?

The carbon fiber will sound slightly different and a little more exotic sounding. It is so close though! At the end of the day if you are leaning one way or the other, go that way. You will not regret it either way! If you do it right the first time, you only have to do it once!

Thanks, Tony

NewYorkJon34 · 05-21-2011, 02:57 PM

Again, my 18" carbon exhaust & LTH's is my most rewarding mod I've done to the car, so far

The sound is very exotic, and am getting complements everywhere I go.

Alchemy · 05-21-2011, 03:12 PM

Man, I love my Stillen parts but kinda wish I bought some F.I. stuff just to support a company with such good customer service. All I hear is good stuff bout you and your company Tony, keep up the good work!!!

Motordyne · 05-21-2011, 09:26 PM

Quote:

Originally Posted by F.I. Inc.

First and foremost thank you for taking an interest in our products!

You look like you are set on our CBE so there is not really much for me to say with that but, thank you!

Now as far as comparing the ART test pipes to our long tube headers, there are alot of things to consider between the two. Purchase cost, install time and/or cost, performance & sound.

I can tell you the test pipes will cost less, are easier to install and will cost less to install. However the sound is subjective and everyone will perceive it differently. Now I can only compare our test pipes to our headers. I have never seen the ART test pipes in person nor done a dyno comparison.

What I can tell you is this, our headers combined with our CBE will give your car a very high end exotic sound. The throttle response from idle to red line is vastly improved over stock. It is beyond a night and day difference!

Again, at the end of the day there a lot of different deciding factors to consider. I am always available via telephone.

If you have any questions please do not hesitate to call me directly...

Thank you, Tony

Tony,

We should sponsor some parts for an independent comparative dyno test and with sound clips.

It would make an interesting comparison everyone would like to see.

Test pipes VS FI LTH VS MD T370 ART pipes.

I'm sure there will be moderate power variations between them and probably more dramatic sound differences.

Later on, we could even do an exhaust comparison when the MD E370 is ready.

There is no hurry but it's something we can do.

Tony

F.I. Inc. · 05-21-2011, 10:56 PM

Quote:

Originally Posted by Alchemy

Kinda wish I bought some F.I. stuff just to support a company with such good customer service. All I hear is good stuff bout you and your company Tony, keep up the good work!!!

Thanks for the positive comments, it is greatly appreciated. If you ever need anything please do not hesitate to call me direclty...

Thank you, Tony

F.I. Inc. · 05-21-2011, 10:57 PM

Quote:

Originally Posted by Motordyne

Tony,

We should sponsor some parts for an independent comparative dyno test and with sound clips.

It would make an interesting comparison everyone would like to see.

Test pipes VS FI LTH VS MD T370 ART pipes.

I'm sure there will be moderate power variations between them and probably more dramatic sound differences.

Later on, we could even do an exhaust comparison when the MD E370 is ready.

There is no hurry but it's something we can do.

Tony

I am definitely open to the idea. Send me an email sometime in the future so we can discuss this further...

Thanks, Tony

Motordyne · 05-21-2011, 11:41 PM

Quote:

I am definitely open to the idea. Send me an email sometime in the future so we can discuss this further...

Thanks, Tony

Right on.

When the MD E370 production is ready we will include the FI and MD exhausts in the same independent comparison.

We'll have to get some good HD A/V recording gear for the occasion.

nofattys · 05-26-2011, 09:10 PM

Since reading this read and putting together a mod list for my car, Im kinda of curious as to what kind of gains can be seen with a CAI, the M370 Intake manifold, FI LTH and FI Carbon Catback Exhaust with 12" resonators.

Can I call dibs on being the test mule for the comparo? Figured Id ask lol

F.I. Inc. · 05-27-2011, 11:27 AM

Quote:

Originally Posted by nofattys

Since reading this read and putting together a mod list for my car, Im kinda of curious as to what kind of gains can be seen with a CAI, the M370 Intake manifold, FI LTH and FI Carbon Catback Exhaust with 12" resonators.

Can I call dibs on being the test mule for the comparo? Figured Id ask lol

Whenever you are ready to discuss your options and possibly place an order for the exhaust, please do not hesitate to call me directly...

Thank you, Tony

05-21-2011, 01:26 PM	#33 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 685	To all in this thread, I have read everyones comments, some of them twice. I think there are a lot of good points. I want to chime in a little bit. I feel we have an edge over everyone else. Yes we are a small company but you have seen the production numbers that we have been able to produce. I cannot think of another company where I can call up, directly deal with the owner and only the owner. That owner is also the designer and creator of my exhaust. Oh and lastly that owner is building my exhaust with his own hands. The bottom line is this. All of of our exhaust systems are manufactured in house. This is the only way to ensure quality assurance. *"Believe me when I tell you, it is physically demanding however we have worked too hard and spent too much time to put our reputation in someone else's hands".* For the record all of our headers are constructed from 304 stainless steel and than left bare or ceramic coated. I noticed in one of the comments someone stated we used steel. I just wanted to clear that up. I am not trying to turn this into a flame war so let's not go there. However, I am encouraging any of you to call me with any questions that you may have. Thank you, Tony __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

05-21-2011, 02:57 PM	#35 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	Again, my 18" carbon exhaust & LTH's is my most rewarding mod I've done to the car, so far The sound is very exotic, and am getting complements everywhere I go. __________________ NewYorkJon34's Ultimate Z Build

05-21-2011, 03:12 PM	#36 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Man, I love my Stillen parts but kinda wish I bought some F.I. stuff just to support a company with such good customer service. All I hear is good stuff bout you and your company Tony, keep up the good work!!! __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Test Pipes/ART Pipes + Y-Pipe with OEM CBE?	AlphaSnacks	Intake/Exhaust	0	04-16-2011 03:44 PM
Headers	Paladinjc	Intake/Exhaust	12	04-08-2011 06:36 PM
FS: Stillen 409SS Headers + Z1 Motorsports Test Pipes	RCZ	Parts for sale (Private Classifieds)	11	04-07-2011 06:46 PM
Running Berk Test pipes...which headers should I go with?	bill2k	Engine & Drivetrain	3	08-15-2010 04:49 PM
FI Headers??	dlmartin81	Intake/Exhaust	6	04-19-2010 08:03 AM

05-26-2011, 09:10 PM	#41 (permalink)
nofattys Base Member Join Date: May 2011 Location: NY Posts: 4 Drives: 08 G8 GT Rep Power: 14	Since reading this read and putting together a mod list for my car, Im kinda of curious as to what kind of gains can be seen with a CAI, the M370 Intake manifold, FI LTH and FI Carbon Catback Exhaust with 12" resonators. Can I call dibs on being the test mule for the comparo? Figured Id ask lol