Stillen Intake for VQ37VHR

vdcoff · 10-02-2008, 03:10 AM

http://www.stillen.com/product.asp?i...infiniti&m=all

Quote:

The 2007-2008 Nissan 350Z, 2007-2008 Infiniti G35 Sedan and the new 2008 Infiniti G37 Coupe make the move to a dual intake setup with two airboxes, air filters and throttle bodies.

Once again, STILLEN was the first to market with an upgraded intake system. Now we have taken this intake to the next level, utilizing additional testing and tuning to create both a short tube and long tube version of our highly acclaimed Hi-Flow Intake System for these vehicles.

We replace the restrictive factory air boxes with two (2) dual cone genuine K&N reusable high flow conical air filters. These filters are designed with an integral velocity stack and attach to our ceramic coated MAF adapters for our short tube kit, or newly designed polished aluminum long tubes. Replacing the factory intake tubes with the STILLEN design adds additional horsepower, and a great look for the engine bay.

The filters sit inside custom-fitted urethane intake boxes, which ensure no hot engine compartment air gets sucked into the intake tract. This creates a cold airpath, and we are proud to be the ONLY intake manufacturer to have developed a true Cold Air Intake for these vehicles. Unlike other manufacturers who only partially shield the filter from hot underhood air, STILLEN has fully enclosed the filters and draws on cold air from behind the grille, the optimum location.

These urethane intake boxes can be left natural black or painted to match the color scheme of the car.

STILLEN Dual Hi-Flow Intake Features:

- Ease of access to filter element
- True Cold Air design via Urethane Boxes
- Genuine K&N Filters - Dual Cone w/Integrated Velocity Stack
- Filters have a 1,000,000 Mile Warranty from K&N
- Fully Tested / Dyno Proven
- No Check Engine Light (CEL) Problems
- No Chance of Hydrolocking
- Polished Aluminum Mandrel Bent Pipes (Long Tube System)
- Silicone Connectors (Long Tube System)
- Easy to Follow Instructions

The Short Tube System yields an additional 6 hp at the wheels, while the new Long Tube System adds 10 hp - 9 lb/ft at the wheels.

The STILLEN Dual Hi-Flow Intake is mild under cruising situations, and really comes to life creating an impressive intake note under acceleration.

tranceformer · 11-05-2008, 02:06 PM

I haven't paid any attention to the 3.7L mods, but do intakes even add any power? I know they just made noise on the 3.5HR.

nogoodname · 12-07-2008, 11:55 PM

forget this!!!!!!!!!!!!!

wait til the G3 version comes out, Stillen made the G3 long tube version for the G37, which gets around 14 hp and 11 lbs of torque...something like that...i seen the dynos from a customer, the Stillen dyno said 18 hp gains...lol

nogoodname · 12-08-2008, 12:25 AM

check my thread STILLEN G3 Ultra Long Tube Intake

Asheth · 01-25-2009, 03:56 PM

nogoodname · 01-25-2009, 04:03 PM

someone deserves a banning hammer slammed on their head in here...I wont say who though.......lol

semtex · 01-25-2009, 04:04 PM

And this accomplishes what exactly ??

Endgame · 01-25-2009, 04:27 PM

AK, can you remove that post? If I was at work and looked at this thread I would be BUSTED!!

01-25-2009, 04:04 PM	#7 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	And this accomplishes what exactly ?? __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

11-05-2008, 02:06 PM	#2 (permalink)
tranceformer A True Z Fanatic Join Date: Nov 2008 Location: Palm Beach, FL Posts: 1,213 Drives: 2009 370Z PW 6MT Rep Power: 268	I haven't paid any attention to the 3.7L mods, but do intakes even add any power? I know they just made noise on the 3.5HR.

12-07-2008, 11:55 PM	#3 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	forget this!!!!!!!!!!!!! wait til the G3 version comes out, Stillen made the G3 long tube version for the G37, which gets around 14 hp and 11 lbs of torque...something like that...i seen the dynos from a customer, the Stillen dyno said 18 hp gains...lol

12-08-2008, 12:25 AM	#4 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	check my thread STILLEN G3 Ultra Long Tube Intake

01-25-2009, 03:56 PM	#5 (permalink)
Asheth Track Member Join Date: Dec 2008 Location: Glen Burnie, Maryland Posts: 917 Drives: 09 Blk 6mt Rep Power: 17

01-25-2009, 04:03 PM	#6 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	someone deserves a banning hammer slammed on their head in here...I wont say who though.......lol

01-25-2009, 04:27 PM	#8 (permalink)
Endgame A True Z Fanatic Join Date: Nov 2008 Location: Phoenix Posts: 1,613 Drives: Nothing Now! Rep Power: 224	AK, can you remove that post? If I was at work and looked at this thread I would be BUSTED!!