Intake + Exhaust = what hp gains overall?

hotdog · 04-19-2011, 03:05 AM

Quote:

Originally Posted by christian370z

Reported, get lost spam.

not really spam.

spearfish25 · 04-19-2011, 07:53 AM

Just gibberish?

FromG2Z · 04-19-2011, 09:42 AM

Quote:

Originally Posted by wdkwang

i made 300whp with k&n intakes and borla catback

K&N drop-in intakes?!?!?!? plus an exhaust is 300whp? Holy moly. No other mods? Isn't that kindda high. I wonder what gains I have right now by just adding an exhaust, with no other mods. Did I gain like 15whp? (no access to a dyno in my small timbuktu town

)

As far as K&N drop-ins... aside from the worry about fouling the MAF sensor (I am still on the fence regarding this... seen both sides of story), what I am worried about are more the particulates that get in. I mean this from the standpoint that I noticed on my G35, that since I switched to K&N, my oil was a lot darker than pre-K&N. Not sure if there's any truth to that at all... but I also read around that some folks did notice that too. Now what that means.... I would be led to believe that the engine is simply running dirtier... maybe someone else can enlighten me on that topic.

Quote:

Originally Posted by hotdog

i would say like 50HP, with a exhaust with a filter, to help with the Ox2 sensor to help with back fire and help with LOW/ HIgh end power. but then it might be a trans to help with a good custom tune. so the O2 air flow can cesspool, the reactor in time

Quote:

Originally Posted by CrownR426

You should also get a high flow cat or test pipe!

Yes, I am thinking about getting HFC's instead of getting a CAI. So if I have a CBE and HFC's, is a tune needed? I would like to NOT get a tune... don't want to void the warranty just yet. Maybe in a couple of years

Quote:

Originally Posted by christian370z

Reported, get lost spam.

Can someone tell me why his post was spam? After reading it, seems like a normal post.... maybe I'm naive

christian370z · 04-19-2011, 11:37 AM

Quote:

Originally Posted by FromG2Z

Can someone tell me why his post was spam? After reading it, seems like a normal post.... maybe I'm naive

He was spamming other threads with complete gibberish, I don't see how does "o2 airflow can cesspool" sounds normal or makes sense as can be said about the rest of the post. FYI, a cesspool is a large pit to dispose sewage or refuse.

wdkwang · 04-19-2011, 12:45 PM

i personally dont think 300whp is high but i have the k&n short ram intakes and borla exhaust. it did get a ecu tune.
our z's make 276whp stock, so my numbers are relatively average

wdkwang · 04-19-2011, 12:46 PM

Quote:

Originally Posted by hotdog

i would say like 50HP, with a exhaust with a filter, to help with the Ox2 sensor to help with back fire and help with LOW/ HIgh end power. but then it might be a trans to help with a good custom tune. so the O2 air flow can cesspool, the reactor in time

lawl wat

Red__Zed · 04-19-2011, 12:47 PM

Quote:

Originally Posted by wdkwang

lawl wat

my thoughts exactly.

Cmike2780 · 04-19-2011, 12:59 PM

Quote:

Originally Posted by FromG2Z

As far as K&N drop-ins... aside from the worry about fouling the MAF sensor (I am still on the fence regarding this... seen both sides of story), what I am worried about are more the particulates that get in. I mean this from the standpoint that I noticed on my G35, that since I switched to K&N, my oil was a lot darker than pre-K&N. Not sure if there's any truth to that at all... but I also read around that some folks did notice that too. Now what that means.... I would be led to believe that the engine is simply running dirtier... maybe someone else can enlighten me on that topic.

The oil color after several cycles can very depending on the type of oil you use. The darkening happens when the oil absorbs carbon deposits from detonation. I could be wrong, but I'm assuming low grade gasoline would have this effect. The K&N filters out the same amount of particles as paper filters if oiled correctly. The oil is there to compensate for the larger openings. I have about 6k miles with my K&N's without any problems. I honestly don't know of anyone having the MAF sensor issue aside from unreliable sources.K&N Mass Air Flow Sensor Statement

FromG2Z · 04-19-2011, 02:52 PM

Quote:

Originally Posted by christian370z

He was spamming other threads with complete gibberish, I don't see how does "o2 airflow can cesspool" sounds normal or makes sense as can be said about the rest of the post. FYI, a cesspool is a large pit to dispose sewage or refuse.

Makes sense now. What does an individual gain from spamming like that? It's not like he's selling anything... weird... and sad, at the same time.

Quote:

Originally Posted by wdkwang

i personally dont think 300whp is high but i have the k&n short ram intakes and borla exhaust. it did get a ecu tune.
our z's make 276whp stock, so my numbers are relatively average

That makes sense. I've seen some stock Z's though, lay down 260 or less. Just a diff't dyno maybe? Either, yeah those are some great whp numbers man. Keep it up.

Quote:

Originally Posted by Cmike2780

The oil color after several cycles can very depending on the type of oil you use. The darkening happens when the oil absorbs carbon deposits from detonation. I could be wrong, but I'm assuming low grade gasoline would have this effect. The K&N filters out the same amount of particles as paper filters if oiled correctly. The oil is there to compensate for the larger openings. I have about 6k miles with my K&N's without any problems. I honestly don't know of anyone having the MAF sensor issue aside from unreliable sources.K&N Mass Air Flow Sensor Statement

Yeah, like I said, whether it's hearsay or not, not sure which is true. Not saying anything was wrong with my K&N filter... I never oiled it... had it on the G for 1-1/2 years, then I traded her in. But I remember before I changed to K&N, when I changed the oil, it was mostly "newer" looking. It's been on Mobil 1 since day one of ownership, with an OEM air filter. Then switched to K&N, then oil started getting darker every change. Like I said weird.... I didn't experience ANY problems whatsoever, and I did notice more giddyup from the butt dyno. I just found it odd that my oil started getting darker. G was stock other than air filter.

Andy5959 · 11-10-2012, 03:41 PM

I need help! Can somebody tell me if i will lose or gain power if i put intakes with stock exhaust?

djpheer · 11-11-2012, 08:31 AM

Quote:

Originally Posted by Andy5959

I need help! Can somebody tell me if i will lose or gain power if i put intakes with stock exhaust?

Gain.

Zoren 370 · 11-11-2012, 08:59 AM

Quote:

Originally Posted by FromG2Z

But I remember before I changed to K&N, when I changed the oil, it was mostly "newer" looking. It's been on Mobil 1 since day one of ownership, with an OEM air filter. Then switched to K&N, then oil started getting darker every change. Like I said weird.... I didn't experience ANY problems whatsoever, and I did notice more giddyup from the butt dyno. I just found it odd that my oil started getting darker. G was stock other than air filter.

Im not a mechanic but my only explanation about that since you change your filters to K&N you actually increased the airflow therefore an increase in air flow = increase in combustion in the chambers equates to generating more HP and more heat inside the engine causes the oil to burn faster thus its more darker.

More air + right amount of fuel injected = More Combustion= Inc HP = more fuel efficiency.

But nothing wrong with that in fact my mechanic told me it just means your car is running more efficiently when your oil becomes darker in time for your scheduled oil change.

To me it made sense.

Gibby1113 · 01-09-2013, 04:53 PM

I am thinking of getting something similar that has been mentioned. I am wondering about getting k&n cai, invidia gemini cbe, unorthodox or stillen pulleys, and I am undecided on which HFCs to get. I want more power but without making my exhaust raspy or having a lot of noise in the cabin. Any recommendations??? Any feedback is much appreciated, thanks.

Zoren 370 · 01-09-2013, 07:47 PM

I do have a Z1 HFC so far no rasp but to get out of the noise inside the cabin is quite impossible because as you free up your exhaust it does makes a lot of noise. But you will love it for sure. In fact I come to a point where I feel its to quiet for me now.
Thinking of getting a test pipe in the future. The Ark HFC is a nice recommendation but I find it to expensive. Berk HFC is another option comparable to Z1.

Gibby1113 · 01-11-2013, 01:50 AM

What is the difference between the Z1, berk, and invidia hfc?

04-19-2011, 07:53 AM	#17 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Just gibberish? Eagle likes this. __________________ 2013 Cadillac V-Wagon, RIP Z

11-10-2012, 03:41 PM	#25 (permalink)
Andy5959 Base Member Join Date: Nov 2011 Location: Miami Age: 29 Posts: 65 Drives: 12 Nissan 370z White Rep Power: 14	Intakes with Stock Exhaust PLEASE HELP!!! I need help! Can somebody tell me if i will lose or gain power if i put intakes with stock exhaust?

01-09-2013, 04:53 PM	#28 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 13	Question about this exhaust I am thinking of getting something similar that has been mentioned. I am wondering about getting k&n cai, invidia gemini cbe, unorthodox or stillen pulleys, and I am undecided on which HFCs to get. I want more power but without making my exhaust raspy or having a lot of noise in the cabin. Any recommendations??? Any feedback is much appreciated, thanks. __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

01-09-2013, 07:47 PM	#29 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	I do have a Z1 HFC so far no rasp but to get out of the noise inside the cabin is quite impossible because as you free up your exhaust it does makes a lot of noise. But you will love it for sure. In fact I come to a point where I feel its to quiet for me now. Thinking of getting a test pipe in the future. The Ark HFC is a nice recommendation but I find it to expensive. Berk HFC is another option comparable to Z1. Gibby1113 likes this.

01-11-2013, 01:50 AM	#30 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 13	What is the difference between the Z1, berk, and invidia hfc? __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo Intake / Exhaust	Fishy	Intake/Exhaust	8	02-14-2011 06:33 PM
Which exhaust company makes the most RWH gains for the 370z??	antfd3s	Intake/Exhaust	20	01-08-2011 12:06 PM
WTB: Intake and/or Exhaust	menzzer37	Exhaust/Intake	2	07-29-2010 08:11 AM
WTB: Intake and/or Exhaust	menzzer37	Parts for sale (Private Classifieds)	0	07-29-2010 08:09 AM
WTB exhaust, intake,	MBLAQ	Australia/New Zealand	8	07-19-2010 03:48 AM