ARK GRIP + GTM RTP = :mad:

TeamARK · 03-25-2011, 01:05 PM

That is for sure. You should change that Mad to Happy..

One_Quick_Z · 03-25-2011, 06:11 PM

Not bad at all alot less amplified is a good way of putting it Berk Test Pipes and HKS exhaust is a great combo.... But I will find out at the end of April how HKS sounds with FI LTH's

DAN

JC671 · 03-31-2011, 08:13 PM

I fixed my issue also, it was the xpipe hitting the cross member. I disconnected the rear exhausts and the section that connects to the xpipe. re-aligned it and used high temp silicone to seal and no more rattling issue.

But I wanted to see pictures of others with this exhaust because it seems that the passenger side hangs lower than the right no matter how straight the connections were made and how far pushed in I put the hangers on the exhaust.

Mine use to hang visibly lower on the right but since I re-aligned everything to the best that it could be its not as bad but you can tell if you looked really hard

TonyBPD · 03-31-2011, 08:37 PM

Sometimes mine looks crooked sometimes it doesn't. The top pic is the most recent and that appears to be straight. I think. lol

JC671 · 03-31-2011, 09:28 PM

Thanks for the pics.. The first two looks fine but the last pic looks a little off on the right side like mine... I'll post mine up when I get to a regular computer + rep for u

TonyBPD · 03-31-2011, 09:37 PM

No prob! Glad I could help.

BLM · 04-01-2011, 08:24 AM

Mine sits perfectly. Aside from making sure you push up the x pipe on install, the fitment was damn near perfect

Alto101 · 07-02-2011, 01:49 PM

I also had the ARK exhaust installed and developed a nasty metallic rattle. I took it back to the shop today and it was the cross member causing the rattle. We configured a spacer kit which increased the clearance from the exhaust to the cross member and the rattle is gone. Too bad ARK doesn't include a spacer kit with the exhaust or at least some instructions warning you of the potential problem. Oh well, a quick easy fix once you know what to do.

daisuke149 · 07-03-2011, 02:14 PM

Quote:

Originally Posted by Alto101

I also had the ARK exhaust installed and developed a nasty metallic rattle. I took it back to the shop today and it was the cross member causing the rattle. We configured a spacer kit which increased the clearance from the exhaust to the cross member and the rattle is gone. Too bad ARK doesn't include a spacer kit with the exhaust or at least some instructions warning you of the potential problem. Oh well, a quick easy fix once you know what to do.

you dont need a spacer. just have the exhaust installed correctly. hold the exhaust up as you tighten the bolts from the cat to the end.

thats the advice for installing any catback actually.

Alto101 · 07-03-2011, 02:46 PM

Quote:

Originally Posted by daisuke149

you dont need a spacer. just have the exhaust installed correctly. hold the exhaust up as you tighten the bolts from the cat to the end.

thats the advice for installing any catback actually.

That may have worked for you but it did not work for me or some others. The spacer was they key, that or removing the cross member.

JollyGoodChap · 07-07-2011, 02:53 PM

will the spacer but any weird stress on the exhaust welds over time? Causing them them to crack in the long run?

TeamARK · 07-07-2011, 06:19 PM

The spacers will not cause any stress to the exhaust thanks to the rubber hangers and the flex pipe at the Y

03-25-2011, 06:11 PM	#77 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	Not bad at all alot less amplified is a good way of putting it Berk Test Pipes and HKS exhaust is a great combo.... But I will find out at the end of April how HKS sounds with FI LTH's DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

03-31-2011, 08:37 PM	#79 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 17	Sometimes mine looks crooked sometimes it doesn't. The top pic is the most recent and that appears to be straight. I think. lol Last edited by TonyBPD; 03-31-2011 at 08:43 PM.

04-01-2011, 08:24 AM	#82 (permalink)
BLM Enthusiast Member Join Date: Feb 2011 Location: NJ Posts: 342 Drives: 2011 Silver M6 sport Rep Power: 14	Mine sits perfectly. Aside from making sure you push up the x pipe on install, the fitment was damn near perfect __________________ K&N // GTM // BERK

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ARK Grip Type 2 - Review + Pics	detroadster	Intake/Exhaust	34	07-30-2013 04:03 AM
FS: Ark Grip Type 2 Exhaust - NEW	Raven	Parts for sale (Private Classifieds)	26	02-07-2011 11:57 AM
Magazine Well Vertical Grip	tvfreakazoid	The Lounge (Off Topic)	5	03-17-2010 05:30 PM
less grip as the re050's wear out?	boosted180	Track / Autocross / Drifting / Dragstrip	11	02-08-2010 11:27 AM
Grip (or lack thereof)	vivalaReagan	Nissan 370Z General Discussions	23	01-28-2010 10:28 AM

03-25-2011, 01:05 PM	#76 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 17	That is for sure. You should change that Mad to Happy..

03-31-2011, 08:13 PM	#78 (permalink)
JC671 Enthusiast Member Join Date: Feb 2011 Location: Guam Posts: 451 Drives: Toretto around Rep Power: 14	I fixed my issue also, it was the xpipe hitting the cross member. I disconnected the rear exhausts and the section that connects to the xpipe. re-aligned it and used high temp silicone to seal and no more rattling issue. But I wanted to see pictures of others with this exhaust because it seems that the passenger side hangs lower than the right no matter how straight the connections were made and how far pushed in I put the hangers on the exhaust. Mine use to hang visibly lower on the right but since I re-aligned everything to the best that it could be its not as bad but you can tell if you looked really hard

03-31-2011, 09:28 PM	#80 (permalink)
JC671 Enthusiast Member Join Date: Feb 2011 Location: Guam Posts: 451 Drives: Toretto around Rep Power: 14	Thanks for the pics.. The first two looks fine but the last pic looks a little off on the right side like mine... I'll post mine up when I get to a regular computer + rep for u

03-31-2011, 09:37 PM	#81 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 17	No prob! Glad I could help.

07-02-2011, 01:49 PM	#83 (permalink)
Alto101 Base Member Join Date: Apr 2011 Location: Raleigh, NC Posts: 93 Drives: 2011 370Z Rep Power: 14	I also had the ARK exhaust installed and developed a nasty metallic rattle. I took it back to the shop today and it was the cross member causing the rattle. We configured a spacer kit which increased the clearance from the exhaust to the cross member and the rattle is gone. Too bad ARK doesn't include a spacer kit with the exhaust or at least some instructions warning you of the potential problem. Oh well, a quick easy fix once you know what to do.

07-07-2011, 02:53 PM	#86 (permalink)
JollyGoodChap Enthusiast Member Join Date: Aug 2010 Location: Lust Angeles Posts: 328 Drives: Z34 Rep Power: 15	will the spacer but any weird stress on the exhaust welds over time? Causing them them to crack in the long run?

07-07-2011, 06:19 PM	#87 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 17	The spacers will not cause any stress to the exhaust thanks to the rubber hangers and the flex pipe at the Y