CBE Replacement Summary

1Sweet Z · 03-07-2011, 12:38 PM

Hey Everyone,

I, like many of you out there feel that the 370z Stock Exhaust is too plain. So I began the quest to see what CBE replacement exhaust would fit my personal taste.

I know there have been many threads started about exhaust replacement, but I wanted to contribute the forum with the research that I found.

My criteria:

1. Tasteful Sound ( mildy exotic, not overly loud)
2. Performance
3. Asthetics - I want a nice fit to the rear fascia
4. Price - (I always want good value)

I compiled all of my research that met this criteria into a matrix so I could evaluate all of it at the same time. I evaluated (sound / performance / asthetics / PIA factor / cost plus other little details). I have embedded hyperlinks to You-tube videos for various driving sounds of each system.

In the end there were 4 systems that I seriously considered.

I also want to mention that I am no expert on the matter, all of this information was pulled from various sources. Pricing provided was from Forum sponsored vendors.

If you find this information helpful then help a brother out with his rep power.

Cheers.

toxik · 03-07-2011, 12:46 PM

F.I. exhaust seems to meet all your criteria, not sure if you like it Aesthetically. But this forum loves the FI exhaust, so I'm sure that's where all the recommendations will go towards. I personally wanted to go for the Tanabe exhaust+Y-pipe, but not a lot of people went with that exhaust.

On a side note... what do you do for a living (the exhaust matrix makes me wonder lol)?

1Sweet Z · 03-07-2011, 12:49 PM

Quote:

Originally Posted by toxik

F.I. exhaust seems to meet all your criteria, not sure if you like it Aesthetically. But this forum loves the FI exhaust, so I'm sure that's where all the recommendations will go towards. I personally wanted to go for the Tanabe exhaust+Y-pipe, but not a lot of people went with that exhaust.

On a side note... what do you do for a living (the exhaust matrix makes me wonder lol)?

I ended up chosing the Tanabe exhaust. I love F.I, but the drone was not for me.
I'm an engineer - is it obivous.

djpathfinder · 03-07-2011, 12:55 PM

addition: Invidia Gemini has an X-pipe.

toxik · 03-07-2011, 12:57 PM

Quote:

Originally Posted by 1Sweet Z

I ended up chosing the Tanabe exhaust. I love F.I, but the drone was not for me.
I'm an engineer - is it obivous.

Nice, Tanabe is a great choice. Shop around with vendors, the quote I got for it is a lot less than what you have listed, with the Y-pipe.

And yes, very obvious... how many exhaust choice worksheets do you see on here?

1Sweet Z · 03-07-2011, 01:14 PM

Thanks for the feedback.
That is why I thought to helpful to compile everything all in one place.

phelan · 03-07-2011, 02:32 PM

ur too organized to be an engineer.

jaycz · 03-07-2011, 06:38 PM

I purchased the Tanabe cbe for $1050 shipped and the Cheap Y pipe thread for $80 shipped.

Jordo! · 03-07-2011, 07:10 PM

Nice compliation of relevant info -- but I would consider reporting the gains in terms of % increase from baseline; even on the dynojet, the raw value gains will be misleading, given that they may all have different starting values.

If any data are from another kind of dynamometer, it will be impossible to comare and contrast without considering % gain rather than raw value gain.

SPOHN · 03-07-2011, 07:40 PM

You defiantly wouldn't want my setup then. But it's what I love. Damn I love these cars.

1Sweet Z · 03-07-2011, 08:05 PM

Quote:

Originally Posted by jaycz

I purchased the Tanabe cbe for $1050 shipped and the Cheap Y pipe thread for $80 shipped.

How was the fit between the Y-Pipe(Sure-win) to the Tanabe system. Any difference in sound?
That is a good price on the tanabe system. Where you dealing with a forum vendor?
I will still probably stick with the overpriced Tanabe Y-Pipe.

djpathfinder · 03-07-2011, 08:36 PM

A real engineer would draw graphs with error bars, etc.

Csquared · 03-07-2011, 08:41 PM

Quote:

Originally Posted by jaycz

I purchased the Tanabe cbe for $1050 shipped and the Cheap Y pipe thread for $80 shipped.

Yep Also interested in where you got it!

b1adesofcha0s · 03-07-2011, 08:46 PM

Quote:

Originally Posted by djpathfinder

A real engineer would draw graphs with error bars, etc.

A real engineer would make his own exhaust

What kind of engineer are you? I'm a chemical engineering student at the moment.

jaycz · 03-07-2011, 09:13 PM

Quote:

Originally Posted by 1Sweet Z

How was the fit between the Y-Pipe(Sure-win) to the Tanabe system. Any difference in sound?
That is a good price on the tanabe system. Where you dealing with a forum vendor?
I will still probably stick with the overpriced Tanabe Y-Pipe.

I installed the Tanabe and the cheap Y pipe at the same time. Fit was fine. The thing I did not like was outlet of the cheap Y pipe, 3 inch, did not match the 2.75 inch inlet of the Tanabe CBE mid section. The vendor was not a forum vendor. PM me if you need more info.

03-07-2011, 12:55 PM	#4 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	addition: Invidia Gemini has an X-pipe. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

03-07-2011, 01:14 PM	#6 (permalink)
1Sweet Z Base Member Join Date: Jan 2011 Location: Ontario, Canada Posts: 185 Drives: 11 GM 370Z A7 Spt/Nv Rep Power: 14	Thanks for the feedback. That is why I thought to helpful to compile everything all in one place. __________________ V-LED : ILLUM KICK PLATES : VENTURE SHIELD : H & R : K & N : GOODRIDGE SS BRAKE LINES : NISMO CBE

03-07-2011, 02:32 PM	#7 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	ur too organized to be an engineer. __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

03-07-2011, 07:10 PM	#9 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Nice compliation of relevant info -- but I would consider reporting the gains in terms of % increase from baseline; even on the dynojet, the raw value gains will be misleading, given that they may all have different starting values. If any data are from another kind of dynamometer, it will be impossible to comare and contrast without considering % gain rather than raw value gain. __________________ Enjoy it. Destroy it.

03-07-2011, 07:40 PM	#10 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	You defiantly wouldn't want my setup then. But it's what I love. Damn I love these cars. __________________

03-07-2011, 06:38 PM	#8 (permalink)
jaycz Base Member Join Date: Aug 2010 Location: Oregon Posts: 189 Drives: 09 370z Tour Red 6MT Rep Power: 15	I purchased the Tanabe cbe for $1050 shipped and the Cheap Y pipe thread for $80 shipped.

03-07-2011, 08:36 PM	#12 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	A real engineer would draw graphs with error bars, etc. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LTT H&R 10mm Stud Replacement Spacers for 15mm stud replacement H&R	chuckd05	Parts for sale (Private Classifieds)	5	02-16-2011 06:05 PM
FS: K&N Replacement Air Filters (2)	370book	Parts for sale (Private Classifieds)	4	09-16-2010 07:09 AM
Lost Key Fob replacement	Reaper42	Nissan 370Z General Discussions	7	09-01-2010 07:48 PM
Best cat replacement..	akgambler47	Intake/Exhaust	17	07-23-2010 01:18 AM
Fog Replacement	370z2	Nissan 370Z General Discussions	32	01-28-2009 07:50 PM