Stillen G3 Intake fit with 34 Row oil cooler?

ichris14 · 01-20-2011, 03:29 PM

Will it fit?
According to Z1motorsports

34 Row (13" x 1 1/4" x 10 1/4") -- Recommended for forced induction applications, serious track applications, or in high temperature climates where extreme conditions may exist. This is our best selling cooler but it will require modifications to install with some intake systems, will not work with Stillen Gen 3 intakes without relocating cooler.

Spencer@Z1 · 01-20-2011, 05:26 PM

Have installed plenty. No problem.

ichris14 · 01-20-2011, 05:58 PM

So there will be no problems at all when installing these two together? No modifications required?

Ron · 01-20-2011, 06:01 PM

Quote:

Originally Posted by Spencer@Z1

Have installed plenty. No problem.

Installed where? description on Z1's website says it will need to be relocated

BOLIO 671 · 01-21-2011, 01:38 AM

Simple relocation....that's all...It will work with the Stillen G3's...you will just have to relocate the oil cooler from mounting space indicated in the manual....

Spencer@Z1 · 01-21-2011, 10:38 AM

Hi guys,

There is no problem for these to clear. This is of course referencing our kit. We recommend the recessed mounting posistion to better support the oil cooler, while not putting as much strain on the composite core support.

We have actually had the Stillen Gen 3's installed on our car with the oil cooler in the forward posistion, and a nismo front body brace (we did have to shim the mounting of the nismo front body brace to clear our AN fittings on the core, but it all fit).

There is no additional modification or deviation from our standard install to allow Stillen Gen 3 intakes.

I hope this helps.

01-20-2011, 03:29 PM	#1 (permalink)
ichris14 Base Member Join Date: Oct 2010 Location: in my house Posts: 37 Drives: it Rep Power: 15	Stillen G3 Intake fit with 34 Row oil cooler? Will it fit? According to Z1motorsports 34 Row (13" x 1 1/4" x 10 1/4") -- Recommended for forced induction applications, serious track applications, or in high temperature climates where extreme conditions may exist. This is our best selling cooler but it will require modifications to install with some intake systems, will not work with Stillen Gen 3 intakes without relocating cooler.

01-21-2011, 01:38 AM	#5 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Simple relocation....that's all...It will work with the Stillen G3's...you will just have to relocate the oil cooler from mounting space indicated in the manual.... __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 06:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 03:27 PM
STILLEN oil cooler kit + STILLEN power steering cooler = fit?	ZBW39	STILLEN	2	07-02-2010 02:08 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 01:41 PM
Berk HFC's, Stillen Intake, and a Stillen Dual Exhaust....	2theextreme	The Lounge (Off Topic)	8	06-18-2009 11:01 PM

01-20-2011, 05:26 PM	#2 (permalink)
Spencer@Z1 Base Member Join Date: Oct 2010 Location: Hiram, GA Posts: 83 Drives: 2011 370Z track rat Rep Power: 15	Have installed plenty. No problem.

01-20-2011, 05:58 PM	#3 (permalink)
ichris14 Base Member Join Date: Oct 2010 Location: in my house Posts: 37 Drives: it Rep Power: 15	So there will be no problems at all when installing these two together? No modifications required?

01-21-2011, 10:38 AM	#6 (permalink)
Spencer@Z1 Base Member Join Date: Oct 2010 Location: Hiram, GA Posts: 83 Drives: 2011 370Z track rat Rep Power: 15	Hi guys, There is no problem for these to clear. This is of course referencing our kit. We recommend the recessed mounting posistion to better support the oil cooler, while not putting as much strain on the composite core support. We have actually had the Stillen Gen 3's installed on our car with the oil cooler in the forward posistion, and a nismo front body brace (we did have to shim the mounting of the nismo front body brace to clear our AN fittings on the core, but it all fit). There is no additional modification or deviation from our standard install to allow Stillen Gen 3 intakes. I hope this helps.