STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.

travisjb · 03-28-2009, 12:53 AM

Quote:

Originally Posted by RCZ

Alright, so...
Installation:...Don't forget to tighten and recheck everything when you are done....

I think maybe you put that in just for me !

Super write up ! Great pics ! THANKS for taking the time to capture all the data and post !... I think we all have our validation that these are the ones to get... I'll be pretty dang surprised if we see anything better

RCZ · 03-28-2009, 01:00 AM

hehe, it wasn't, but it fits rather well

Endgame · 03-28-2009, 09:17 AM

RCZ... Well done Sir!! This is excellent and most encouraging news. Not to mention this thing sound HAWT!!!

I know it has been covered before, but I must ask... Are we SURE this will not cause further cooling issues with the partial blockage of the radiator with the bumper on??

Josh feel free to chime in on that also...

MightyBobo · 03-28-2009, 09:28 AM

Well done RCZ - thats funny, I seem to remember a discussion where I was saying something to the tune of 310 WHP with a top quality I/H/E setup and you agreed with it....hmmmmmm, eh?

steronz · 03-28-2009, 10:05 AM

Quote:

Originally Posted by wstar

I would suspect this is a non-issue. You're not really trying to force air into the filters. When you hit the throttle, they *suck* the air in. As long as they're not placed in some wierd low-pressure area, they'll pull in whatever air they need just fine. The important thing is that the air they have available to suck is cold (relatively speaking). They look fine to me from a water perspective as well, assuming you don't do something stupid like ram a garden hose nozzle up under your intake grille and try to kill them.

Still, it'd be nice to know for sure rather than suspecting. I mean, they were on the dyno, the bumper was probably sitting a few feet away... would have been nice for them to slip it on and see if there's a difference.

Musashi · 03-28-2009, 10:17 AM

Quote:

Originally Posted by steronz

Still, it'd be nice to know for sure rather than suspecting. I mean, they were on the dyno, the bumper was probably sitting a few feet away... would have been nice for them to slip it on and see if there's a difference.

Why so you can retro fit it to your kia sedona??

Do you even have a 370z???

MightyBobo · 03-28-2009, 10:20 AM

Quote:

Originally Posted by Musashi

Why so you can retro fit it to your kia sedona??

Do you even have a 370z???

*sigh*....

He's my RL friend.

He also has a sense of humor. You, apparently, do not.

Musashi · 03-28-2009, 10:38 AM

I do, and my post was a joke.. A lot of haters in the forum and an awful lot of people with no Z that like to make comments.

MightyBobo · 03-28-2009, 10:45 AM

Quote:

Originally Posted by Musashi

I do, and my post was a joke.. A lot of haters in the forum and an awful lot of people with no Z that like to make comments.

Very true. He's not one, though. And the point is fairly valid, I'd have probably dyno-ed with the bumper on just to close off any loose ends. But, Im sure, RCZ will baseline it again once he goes to do his exhaust.

And why does someone need to have a Z to make a comment about dyno tuning with a bumper on, anyway? heh. Or was that simply saying that people without Z's or much knowledge about cars in general like to come on here and make blanket statements?

semtex · 03-28-2009, 11:17 AM

FWIW, I'll be doing my dyno with the bumper cover on, not off. I'm going to see if they can fit me in on Monday. Of course, I have a different exhaust setup than RCZ, so it's not going to directly answer the question of whether or not he'd have seen the same gain had he put the bumper cover back on prior to the post-install dyno. But it'll at least give us some contrasting/corroborating numbers.

semtex · 03-28-2009, 11:27 AM

Hey RCZ, have you noticed any change in the interior sound from the intakes? I haven't noticed anything significant from mine, but I suspect that's because any change from the intakes is being drowned out by the sound from my Stillen exhaust / Berk HFCs.

MightyBobo · 03-28-2009, 11:31 AM

Quote:

Originally Posted by semtex

FWIW, I'll be doing my dyno with the bumper cover on, not off. I'm going to see if they can fit me in on Monday. Of course, I have a different exhaust setup than RCZ, so it's not going to directly answer the question of whether or not he'd have seen the same gain had he put the bumper cover back on prior to the post-install dyno. But it'll at least give us some contrasting/corroborating numbers.

RCZ is running just stock exhaust, is he not?

semtex · 03-28-2009, 11:37 AM

Quote:

Originally Posted by MightyBobo

RCZ is running just stock exhaust, is he not?

I believe so, yes. I think he plans to go with the Stillen/Berk setup like mine for the exhaust. Not sure when, though. Hopefully, at some point in the not too distant future our cars will have the exact same setup (which is where we're headed), then it'd be REALLY interesting to compare our dyno numbers and see if there are any major variances.

MightyBobo · 03-28-2009, 11:47 AM

Quote:

Originally Posted by semtex

I believe so, yes. I think he plans to go with the Stillen/Berk setup like mine for the exhaust. Not sure when, though. Hopefully, at some point in the not too distant future our cars will have the exact same setup (which is where we're headed), then it'd be REALLY interesting to compare our dyno numbers and see if there are any major variances.

Agreed. The Stillen exhaust is what I have my eyes on myself, so i'll be VERY interested in seeing your results. Will you be using a Mustang dyno, also?

Black kNight · 03-28-2009, 11:49 AM

thanks RCZ woo big increase in hp

ok i have Question
If some water got inside the intake due to the place where they are . Is it going to effect the car i mean like while driving in the rain

03-28-2009, 09:28 AM	#19 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	Well done RCZ - thats funny, I seem to remember a discussion where I was saying something to the tune of 310 WHP with a top quality I/H/E setup and you agreed with it....hmmmmmm, eh? __________________ I don't own a car anymore.

03-28-2009, 11:17 AM	#25 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	FWIW, I'll be doing my dyno with the bumper cover on, not off. I'm going to see if they can fit me in on Monday. Of course, I have a different exhaust setup than RCZ, so it's not going to directly answer the question of whether or not he'd have seen the same gain had he put the bumper cover back on prior to the post-install dyno. But it'll at least give us some contrasting/corroborating numbers. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

03-28-2009, 11:27 AM	#26 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	Hey RCZ, have you noticed any change in the interior sound from the intakes? I haven't noticed anything significant from mine, but I suspect that's because any change from the intakes is being drowned out by the sound from my Stillen exhaust / Berk HFCs. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen III Ultra Long Tube Intakes Nissan 370Z FREE SHIPPING : IntensePOWER!	INTENSEPOWER	Exhaust/Intake	206	08-27-2010 03:41 PM
Install of Stillen G3 Intakes complete - review, etc.	semtex	Intake/Exhaust	83	06-23-2010 01:19 PM
STILLEN Gen 3 Intakes Released!	Josh@STILLEN	Intake/Exhaust	45	04-17-2009 05:20 PM
JWT Pop Chargers - Pictures - Review - Dyno	RCZ	Intake/Exhaust	31	03-30-2009 10:50 AM
Z Rally Impressions	shizzawha	Nissan 370Z General Discussions	18	12-06-2008 11:58 PM

03-28-2009, 01:00 AM	#17 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	hehe, it wasn't, but it fits rather well

03-28-2009, 09:17 AM	#18 (permalink)
Endgame A True Z Fanatic Join Date: Nov 2008 Location: Phoenix Posts: 1,613 Drives: Nothing Now! Rep Power: 224	RCZ... Well done Sir!! This is excellent and most encouraging news. Not to mention this thing sound HAWT!!! I know it has been covered before, but I must ask... Are we SURE this will not cause further cooling issues with the partial blockage of the radiator with the bumper on?? Josh feel free to chime in on that also...

03-28-2009, 10:38 AM	#23 (permalink)
Musashi Enthusiast Member Join Date: Mar 2009 Location: New Jersey Posts: 357 Drives: 09 370Z 6speed Rep Power: 606	I do, and my post was a joke.. A lot of haters in the forum and an awful lot of people with no Z that like to make comments.

03-28-2009, 11:49 AM	#30 (permalink)
Black kNight Base Member Join Date: Dec 2008 Location: Oman Posts: 239 Drives: Model 2003 MB C-180k Rep Power: 272	thanks RCZ woo big increase in hp ok i have Question If some water got inside the intake due to the place where they are . Is it going to effect the car i mean like while driving in the rain