STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.

Team_STILLEN · 05-27-2015, 01:28 PM

Quote:

Originally Posted by Adalvar

Sup gentleman. I have had the Stillen longtube G3s for about two years now. Over the last couple of months has been experiencing some hesitation when it comes to accelerating rapidly. I have also noticed that my check engine light came on, probably had to do with emissions. So I decided to take it to Nissan, and they assured when they ran the diagnostics test it had to so with the intake system.

Has anyone else encountered the same issue with theirs?

Please advise if any info.

Thanks,

-Adalvar

Did they tell you what the codes were?

Team_STILLEN · 05-27-2015, 01:58 PM

Anyone who has been asking about discounts on the Gen 3's. They are on sale until June 1st right now!

STILLEN Gen 3 Intake Sale!!! Ends June 1st!

BoogerHead · 05-29-2015, 04:36 PM

I have the G3 on my 370 and have been having some issues...I felt like I lost some power and took it in to get looked at. Tech says the intakes may be causing my gas to be running lean. Any merit to this or should I keep looking for other causes?

BoogerHead · 05-29-2015, 04:39 PM

Quote:

Originally Posted by Team_STILLEN

Did they tell you what the codes were?

Just saw this after I posted. Yeah man tech are saying the intake is causing my car to run lean. And I'm def not getting the same pick up and go as I did when first installed. Have had them on for about a year. Contemplating putting my stocks back on. Hope Stillen see these and can give us some answers

ANMVQ · 05-29-2015, 04:44 PM

I ran mine for over a year no problems. Has anyone checked the codes? ^^^^ do you have codes or going of butt dyno. These cars run so rich from the factory that intakes alone wouldn't cause a lean issue unless you have leaks in the system after the MAF's. Try cleaning the filter, Over a year should be cleaned anyways and clean the MAF's.

I have a friend who was fully bolted , Headers ETC, and wasn't so lean he had problems. He drove it that way for over a year before getting a tune.

Team_STILLEN · 05-29-2015, 06:28 PM

Quote:

Originally Posted by BoogerHead

Just saw this after I posted. Yeah man tech are saying the intake is causing my car to run lean. And I'm def not getting the same pick up and go as I did when first installed. Have had them on for about a year. Contemplating putting my stocks back on. Hope Stillen see these and can give us some answers

So I'm guessing they didn't give you any details on things like Alpha's? So there was no Check Engine Light at all?

Adalvar · 05-29-2015, 11:39 PM

At the time of my diagnostic with Nissan I didn't think of asking them for the codes.

According to the sales associate at stillen, I won't mention his name, I didn't have to clean my air filters until at least 50,000 miles, my car only has 28k miles on it. However, I noticed that Stillen now has an oil filter and dry filter. I will clean out the filters, but at least I'm not the only one with the same issue.

-Adalvar

jchammond · 05-30-2015, 09:29 PM

stock except drop in K&N...Dyno Guy said mine was a tad rich... But makes good power/1st run in 4th to 7200,,,2nd in 5th to 7k....156mph-hit speed limiter

Sent from my iPhone using Tapatalk

MightyBobo · 05-31-2015, 10:00 PM

Quote:

Originally Posted by Adalvar

At the time of my diagnostic with Nissan I didn't think of asking them for the codes.

According to the sales associate at stillen, I won't mention his name, I didn't have to clean my air filters until at least 50,000 miles, my car only has 28k miles on it. However, I noticed that Stillen now has an oil filter and dry filter. I will clean out the filters, but at least I'm not the only one with the same issue.

-Adalvar

Take that 50k mileage and throw it out the window - you've changed to a completely different intake setup. One that is more exposed to the elements.

Take them off, give them a good cleaning. Also, clean your MAFs.

BOLIO 671 · 06-03-2015, 09:14 AM

Quote:

Originally Posted by BoogerHead

I have the G3 on my 370 and have been having some issues...I felt like I lost some power and took it in to get looked at. Tech says the intakes may be causing my gas to be running lean. Any merit to this or should I keep looking for other causes?

Are u running anything else besides the intakes (I.e. hfc's, headers, tp's, cbe?) If so the addition of the intakes will cause u to run lean and will require for u to get a tune via UpRev in order to fix it. I had this issue when I added the G3's to my setup. Tune fixed the issues of it running lean.

BoogerHead · 06-03-2015, 09:48 AM

Yeah...I'm running nismo cat back with it. I'll look into a tune

ANMVQ · 06-03-2015, 11:05 AM

Quote:

Originally Posted by Adalvar

At the time of my diagnostic with Nissan I didn't think of asking them for the codes.

According to the sales associate at stillen, I won't mention his name, I didn't have to clean my air filters until at least 50,000 miles, my car only has 28k miles on it. However, I noticed that Stillen now has an oil filter and dry filter. I will clean out the filters, but at least I'm not the only one with the same issue.

-Adalvar

Like Stated above that ridiculous @50k, Clean them every 12k or once a year you'd be surprised how dirty they are. At 50k they be cake !! An clean the MAF's

Team_STILLEN · 06-03-2015, 12:00 PM

Quote:

Originally Posted by BOLIO 671

Are u running anything else besides the intakes (I.e. hfc's, headers, tp's, cbe?) If so the addition of the intakes will cause u to run lean and will require for u to get a tune via UpRev in order to fix it. I had this issue when I added the G3's to my setup. Tune fixed the issues of it running lean.

We have not seen this issue with just 1 additional mod. We have seen this happen with customers running Gen 3's, Cat-back, and High Flow Cats or Headers. The Cat-back and Gen 3's have never given us an issue. I would be interested in figuring out why yours threw codes.

Quote:

Originally Posted by BoogerHead

Yeah...I'm running nismo cat back with it. I'll look into a tune

So are you getting any CEL's? There are other factors that could be contributing to this, but it is hard to say. Not knowing where your car started a dyno would only tell you so much. Either way, you will gain power from a tune at this point (though if you are thinking about any other engine mods I would do it before the tune).

Quote:

Originally Posted by ANMVQ

Like Stated above that ridiculous @50k, Clean them every 12k or once a year you'd be surprised how dirty they are. At 50k they be cake !! An clean the MAF's

50K + is a bit optimistic. I have spoken to K&N and they are very confident in their filters. For an air intake system they have said that 25-50k miles are the cleaning intervals that are ideal. The best thing to do is to inspect the filters and see if they need cleaning. Dirty for the K&N oiled filters isn't really a big issue. They state that the filters work better when a bit dirty. I personally clean my filters when I see build up on the wire mesh for the filter. Was typically ~20-25k miles when I lived in Los Angeles. Seems to stay cleaner here in Orange County so I'm guessing I'll go 25-30k miles.

ANMVQ · 06-03-2015, 02:42 PM

Yea the reason I clean mine once a year is the east coast is tuff weather wise, Snow, sleet rain, tends to beat the crap out of anything, LOL

Team_STILLEN · 06-03-2015, 03:11 PM

Quote:

Originally Posted by ANMVQ

Yea the reason I clean mine once a year is the east coast is tuff weather wise, Snow, sleet rain, tends to beat the crap out of anything, LOL

Makes sense. I've never had to take care of an east coast car so you'd probably know better how quickly things get dirty LOL.

Inspection is always the key. Just look at them every 10k miles or so and see how the filter is doing. If the wire mesh doesn't have build up on it yet you are okay.

05-27-2015, 01:58 PM	#257 (permalink)
Team_STILLEN Base Member Join Date: Dec 2013 Location: Costa Mesa, California Posts: 216 Drives: 2009 370Z Rep Power: 20	Anyone who has been asking about discounts on the Gen 3's. They are on sale until June 1st right now! STILLEN Gen 3 Intake Sale!!! Ends June 1st! __________________ Financing with Affirm now available!!! *STILLEN* \| Robin \| Performance Specialist \| rmoses@stillen.com\| 800.576.2131 x133 \|

05-29-2015, 04:44 PM	#260 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	I ran mine for over a year no problems. Has anyone checked the codes? ^^^^ do you have codes or going of butt dyno. These cars run so rich from the factory that intakes alone wouldn't cause a lean issue unless you have leaks in the system after the MAF's. Try cleaning the filter, Over a year should be cleaned anyways and clean the MAF's. I have a friend who was fully bolted , Headers ETC, and wasn't so lean he had problems. He drove it that way for over a year before getting a tune. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

05-29-2015, 11:39 PM	#262 (permalink)
Adalvar Base Member Join Date: Jul 2013 Location: Phoenix, AZ Posts: 179 Drives: 13 Nissan 370z Nismo Rep Power: 12	STILLEN Longtube G3 Intakes. Review, Dyno and Impressions. At the time of my diagnostic with Nissan I didn't think of asking them for the codes. According to the sales associate at stillen, I won't mention his name, I didn't have to clean my air filters until at least 50,000 miles, my car only has 28k miles on it. However, I noticed that Stillen now has an oil filter and dry filter. I will clean out the filters, but at least I'm not the only one with the same issue. -Adalvar Last edited by Adalvar; 05-30-2015 at 12:49 AM.

05-30-2015, 09:29 PM	#263 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	stock except drop in K&N...Dyno Guy said mine was a tad rich... But makes good power/1st run in 4th to 7200,,,2nd in 5th to 7k....156mph-hit speed limiter Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

06-03-2015, 02:42 PM	#269 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Yea the reason I clean mine once a year is the east coast is tuff weather wise, Snow, sleet rain, tends to beat the crap out of anything, LOL __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

05-29-2015, 04:36 PM	#258 (permalink)
BoogerHead Base Member Join Date: Jun 2013 Location: Herndon, VA Posts: 48 Drives: 2013 Nissan 370Z Rep Power: 12	I have the G3 on my 370 and have been having some issues...I felt like I lost some power and took it in to get looked at. Tech says the intakes may be causing my gas to be running lean. Any merit to this or should I keep looking for other causes?

06-03-2015, 09:48 AM	#266 (permalink)
BoogerHead Base Member Join Date: Jun 2013 Location: Herndon, VA Posts: 48 Drives: 2013 Nissan 370Z Rep Power: 12	Yeah...I'm running nismo cat back with it. I'll look into a tune

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen III Ultra Long Tube Intakes Nissan 370Z FREE SHIPPING : IntensePOWER!	INTENSEPOWER	Exhaust/Intake	206	08-27-2010 03:41 PM
Install of Stillen G3 Intakes complete - review, etc.	semtex	Intake/Exhaust	83	06-23-2010 01:19 PM
STILLEN Gen 3 Intakes Released!	Josh@STILLEN	Intake/Exhaust	45	04-17-2009 05:20 PM
JWT Pop Chargers - Pictures - Review - Dyno	RCZ	Intake/Exhaust	31	03-30-2009 10:50 AM
Z Rally Impressions	shizzawha	Nissan 370Z General Discussions	18	12-06-2008 11:58 PM