MOTORDYNE ART Pipes - Review

Kastley85891 · 02-10-2011, 08:57 AM

^ With a Y pipe I had a small amount, with a CBE I assume it will be just great, GZ3 sounds happy ;-)

Motordyne · 02-10-2011, 10:24 AM

Quote:

Originally Posted by docaam

anyone having any problem of vibration in their ART pipes, as one of my friend for his j bent broken??

The ART pipes come with a 2 year material and craftsmanship warranty.

If there is ever a problem give us a call. (661) 298-7555 We'll take care of you.

Footloose301 · 02-10-2011, 10:25 AM

Quote:

Originally Posted by Motordyne

The ART pipes come with a 2 year material and craftsmanship warranty.

If there is ever a problem give us a call. (661) 298-7555 We'll take care of you.

So.... When can we order? I want a set

Motordyne · 02-10-2011, 10:26 AM

Not in stock yet. Working on more now.
I'll make a post when they are ready.

docaam · 02-10-2011, 10:53 AM

Quote:

Originally Posted by Motordyne

The ART pipes come with a 2 year material and craftsmanship warranty.

If there is ever a problem give us a call. (661) 298-7555 We'll take care of you.

Great Tony, I am extremely happy with the pipes, but just this one incident I have seen locally so was a bit worried. Though just to clear to everyone your customer service was great

to offer replacement to the guy from Dubai.

Do we need to make some kind of bracket to avoid any breakage or just use it as it is

, as was thinking of getting some weld done

Coming to warranty its for international as well right? any conditions linked to it? like can use with any catback right

Motordyne · 02-10-2011, 12:48 PM

No change is needed. We found the first 4 units made were accidentally fabricated with 0.049" wall SS304 tubing instead of the required 0.065" wall SS304.

When we get them back in stock We'll send out a proper set.

As far as connection with other catbacks, I can't say with absolute certainty. It will depend in part on the design and fitment of the CBE connected to it. We can however guarantee full compatibility of all Motordyne parts with stock and other Motordyne parts.

daisuke149 · 02-10-2011, 12:50 PM

Quote:

Originally Posted by Motordyne

Not in stock yet. Working on more now.
I'll make a post when they are ready.

dont sell out too fast before Atlanta gets its share...

docaam · 02-11-2011, 01:19 AM

Quote:

Originally Posted by Motordyne

No change is needed. We found the first 4 units made were accidentally fabricated with 0.049" wall SS304 tubing instead of the required 0.065" wall SS304.

When we get them back in stock We'll send out a proper set.

As far as connection with other catbacks, I can't say with absolute certainty. It will depend in part on the design and fitment of the CBE connected to it. We can however guarantee full compatibility of all Motordyne parts with stock and other Motordyne parts.

So it means there wont be any warranty as I am using mine with Invidia CB exhaust with ART pipes. Only thing is guys here are pushing to get some brackets and if I have the assurance that warranty is there then its a peace of mind for me for the next two years

I am going for a tune next week so will post some dyno numbers

Motordyne · 02-11-2011, 08:58 AM

The invidia exhaust is fine with the 2 year warranty, but don't make any modifications to the ART pipes.

fairladyZ34 · 02-11-2011, 09:17 AM

mmm i kinda want a pair myself now...

'10Anamoly · 02-11-2011, 09:19 AM

Hey Tony, was there a downside to putting a support bracket or gusset between the side branch and primary pipe? Seems like it could only help and for a minimal cost.

docaam · 02-11-2011, 09:24 AM

Quote:

Originally Posted by Motordyne

The invidia exhaust is fine with the 2 year warranty, but don't make any modifications to the ART pipes.

Thanks a lot

Maybe Invidia wont last...and everything will be motordyne in the future

Footloose301 · 02-11-2011, 09:50 AM

Quote:

Originally Posted by Motordyne

No change is needed. We found the first 4 units made were accidentally fabricated with 0.049" wall SS304 tubing instead of the required 0.065" wall SS304.

When we get them back in stock We'll send out a proper set.

As far as connection with other catbacks, I can't say with absolute certainty. It will depend in part on the design and fitment of the CBE connected to it. We can however guarantee full compatibility of all Motordyne parts with stock and other Motordyne parts.

So I'm sure my HKS Hi power TI should have zero issues with fitment

Kastley85891 · 02-11-2011, 10:39 AM

I think the only issue will be the people stopping you to ask what you are running.. it will sound sick

Motordyne · 02-11-2011, 11:38 AM

Quote:

Originally Posted by '10Anamoly

Hey Tony, was there a downside to putting a support bracket or gusset between the side branch and primary pipe? Seems like it could only help and for a minimal cost.

Weather it be due to excessive thermal gradients or stress risers, I've seen a lot of brackets of different kinds put onto test pipes and HFC's.... and they are notorious for cracking or breaking.

Sometimes its better to simply allow structures (or pipes) to be a little flexible as opposed to rigidly braced.

02-10-2011, 08:57 AM	#166 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	^ With a Y pipe I had a small amount, with a CBE I assume it will be just great, GZ3 sounds happy ;-) __________________ Boosted V8 hunter 2850 lbs and 375WHP

02-11-2011, 08:58 AM	#174 (permalink)
Motordyne Enthusiast Member Join Date: Nov 2008 Location: Los Angeles Posts: 384 Drives: Z Rep Power: 17	The invidia exhaust is fine with the 2 year warranty, but don't make any modifications to the ART pipes. Last edited by Motordyne; 02-11-2011 at 09:00 AM.

02-11-2011, 09:17 AM	#175 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 19	mmm i kinda want a pair myself now... __________________ From Z to G to BMW and back to a G! Nismo for life

02-11-2011, 09:19 AM	#176 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 17	Hey Tony, was there a downside to putting a support bracket or gusset between the side branch and primary pipe? Seems like it could only help and for a minimal cost. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

02-11-2011, 10:39 AM	#179 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	I think the only issue will be the people stopping you to ask what you are running.. it will sound sick __________________ Boosted V8 hunter 2850 lbs and 375WHP

02-10-2011, 10:26 AM	#169 (permalink)
Motordyne Enthusiast Member Join Date: Nov 2008 Location: Los Angeles Posts: 384 Drives: Z Rep Power: 17	Not in stock yet. Working on more now. I'll make a post when they are ready.

02-10-2011, 12:48 PM	#171 (permalink)
Motordyne Enthusiast Member Join Date: Nov 2008 Location: Los Angeles Posts: 384 Drives: Z Rep Power: 17	No change is needed. We found the first 4 units made were accidentally fabricated with 0.049" wall SS304 tubing instead of the required 0.065" wall SS304. When we get them back in stock We'll send out a proper set. As far as connection with other catbacks, I can't say with absolute certainty. It will depend in part on the design and fitment of the CBE connected to it. We can however guarantee full compatibility of all Motordyne parts with stock and other Motordyne parts.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Review: Motordyne M370 Manifold w/ Comparisons	Staples	Intake/Exhaust	66	06-21-2014 01:35 PM
Motordyne test pipes?	Dan Z Man	Intake/Exhaust	37	12-15-2010 09:12 PM
Motordyne Intake Manifold on the way!!	GZ3	Intake/Exhaust	67	09-16-2010 12:49 AM
another FI 18" CF CBE review w/ test pipes	mrdino77	Intake/Exhaust	9	05-27-2010 12:13 PM