MOTORDYNE ART Pipes - Review

NV370z · 08-19-2011, 04:08 PM

It appears most HFC/test pipes have a mounting bracket welded as part of the design for the catalytic converter cross brace. From the pics on the Motordyne site it does not look like these are utilized. Is the cross brace simply not used when running ART pipes? Has this caused any issues with expansion joints on common CBE's?

Motordyne · 08-19-2011, 04:30 PM

Quote:

Originally Posted by NV370z

It appears most HFC/test pipes have a mounting bracket welded as part of the design for the catalytic converter cross brace. From the pics on the Motordyne site it does not look like these are utilized. Is the cross brace simply not used when running ART pipes? Has this caused any issues with expansion joints on common CBE's?

None I'm aware of.

37drift · 08-24-2011, 11:38 AM

kosstick - any changes in sound?

I passed the 900 mile mark today, still jingling away.

daisuke149 · 08-24-2011, 11:40 AM

as a note on the sound. I think ive passed around the 1200 mile marker with the ART pipes now and its actually settling in again. Gotten slightly tamer without a noticeable change in deepness/pitch from a few hundred miles ago.

Which im happy with. loud exhausts = not for me (P.S its still loud when you go full throttle, the way it should be. tame for normal, screamer when you gun it)

Methodical4u · 08-24-2011, 12:18 PM

Quote:

Originally Posted by NV370z

It appears most HFC/test pipes have a mounting bracket welded as part of the design for the catalytic converter cross brace. From the pics on the Motordyne site it does not look like these are utilized. Is the cross brace simply not used when running ART pipes? Has this caused any issues with expansion joints on common CBE's?

I was wondering the same thing, but A LOT of people are using these and i've not seen any complaints on them.

When you bolt them up, they are solid though... it certainly doesn't feel like the brace is needed. The stock cats are about 3.3 lbs heavier each from what the OP said as well so that takes a little stress off.

On top of all of that you probably save another 2 or 3 lbs from not using the brace ... so 9 lbs weight savings from these sounds good to me

TonyBPD · 08-24-2011, 02:06 PM

Quote:

Originally Posted by daisuke149

as a note on the sound. I think ive passed around the 1200 mile marker with the ART pipes now and its actually settling in again. Gotten slightly tamer without a noticeable change in deepness/pitch from a few hundred miles ago.

Which im happy with. loud exhausts = not for me (P.S its still loud when you go full throttle, the way it should be. tame for normal, screamer when you gun it)

daisuke, what exhaust are you running?

daisuke149 · 08-24-2011, 03:08 PM

CNT exhaust

Footloose301 · 08-24-2011, 04:58 PM

Update: Went back and forth to NY from FL and have 4600 miles on these without issues.

kosstick · 08-24-2011, 06:19 PM

Quote:

Originally Posted by 37drift

kosstick - any changes in sound?

I passed the 900 mile mark today, still jingling away.

Im right around there and yep still jingling away as well

Motordyne · 08-24-2011, 06:55 PM

37drift has the chrome and may actually have the ceramic beads in there. I'm sending him the newer ones.

Kosstich, Do you have the chrome or titanium?

Methodical4u · 08-24-2011, 07:07 PM

Quote:

Originally Posted by Motordyne

37drift has the chrome and may actually have the ceramic beads in there. I'm sending him the newer ones.

Kosstich, Do you have the chrome or titanium?

Hey Tony... what is that outside coating again? Ceramic titanium? I assume it won't ever need to be coated with any kind of high temp paint or anything correct?

Any word on that exhaust yet? hehe... thought i'd sneak that in there after I saw a 350 with 317 whp and 272 torque with the ART pipes and your TDX exhaust... very impressive numbers.

kosstick · 08-24-2011, 10:26 PM

Quote:

Originally Posted by Motordyne

37drift has the chrome and may actually have the ceramic beads in there. I'm sending him the newer ones.

Kosstich, Do you have the chrome or titanium?

Titanium

Methodical4u · 08-24-2011, 11:17 PM

Just a little over a hundred miles on mine and so far not a sound.

Motordyne · 08-25-2011, 09:25 AM

Quote:

Originally Posted by kosstick

Titanium

OK good. Then you certainly don't have the ceramic beads in there then. Its probably just the silica coated fiberglass going through break in. Let me know how it goes.

Motordyne · 08-25-2011, 09:27 AM

Quote:

Originally Posted by Methodical4u

Hey Tony... what is that outside coating again? Ceramic titanium? I assume it won't ever need to be coated with any kind of high temp paint or anything correct?

Any word on that exhaust yet? hehe... thought i'd sneak that in there after I saw a 350 with 317 whp and 272 torque with the ART pipes and your TDX exhaust... very impressive numbers.

You have the Titanium and it won't ever need to be coated again. The pipes are made of stainless steel so even if there is a scratch it won't matter. They will last the life of your car.

The new exhaust is being worked on now. And it is very different from anything else.

08-24-2011, 04:58 PM	#638 (permalink)
Footloose301 A True Z Fanatic Join Date: Apr 2010 Location: Naples, FL Posts: 2,659 Drives: 40th Rep Power: 22	Update: Went back and forth to NY from FL and have 4600 miles on these without issues. __________________ 2010 40th Anniversary 370Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Review: Motordyne M370 Manifold w/ Comparisons	Staples	Intake/Exhaust	66	06-21-2014 01:35 PM
Motordyne test pipes?	Dan Z Man	Intake/Exhaust	37	12-15-2010 09:12 PM
Motordyne Intake Manifold on the way!!	GZ3	Intake/Exhaust	67	09-16-2010 12:49 AM
another FI 18" CF CBE review w/ test pipes	mrdino77	Intake/Exhaust	9	05-27-2010 12:13 PM

08-19-2011, 04:08 PM	#631 (permalink)
NV370z Base Member Join Date: Jan 2011 Location: LV Posts: 57 Drives: '10 370z MT Spt Pkg Rep Power: 15	It appears most HFC/test pipes have a mounting bracket welded as part of the design for the catalytic converter cross brace. From the pics on the Motordyne site it does not look like these are utilized. Is the cross brace simply not used when running ART pipes? Has this caused any issues with expansion joints on common CBE's?

08-24-2011, 11:38 AM	#633 (permalink)
37drift Base Member Join Date: Aug 2011 Location: Syracuse, NY Posts: 11 Drives: Infiniti G37 Coupe Rep Power: 14	kosstick - any changes in sound? I passed the 900 mile mark today, still jingling away.

08-24-2011, 11:40 AM	#634 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 32	as a note on the sound. I think ive passed around the 1200 mile marker with the ART pipes now and its actually settling in again. Gotten slightly tamer without a noticeable change in deepness/pitch from a few hundred miles ago. Which im happy with. loud exhausts = not for me (P.S its still loud when you go full throttle, the way it should be. tame for normal, screamer when you gun it)

08-24-2011, 03:08 PM	#637 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 32	CNT exhaust

08-24-2011, 06:55 PM	#640 (permalink)
Motordyne Enthusiast Member Join Date: Nov 2008 Location: Los Angeles Posts: 384 Drives: Z Rep Power: 17	37drift has the chrome and may actually have the ceramic beads in there. I'm sending him the newer ones. Kosstich, Do you have the chrome or titanium?

08-24-2011, 11:17 PM	#643 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 16	Just a little over a hundred miles on mine and so far not a sound.