Biggest difference between cheap and expensive hfc

tjlazer · 11-17-2010, 04:03 PM

I have the ERZ and they are awesome. Fit perfectly and no CEL issues at all. Paired up just fine to my FI CBE.

Jordo! · 11-18-2010, 12:12 AM

Quote:

Originally Posted by TypeOne

I can't speak for him, but I can honestly see it in the difference in quality of anything in the automotive aftermarket industry.

Compare an Amuse cat back to an Agency Power. (I hate to say it) but Agency Power stuff is made in China and Taiwan. There is a wholesale company overseas that sells all of the parts that AP brands and sells under their own name.

The Amuse stuff is by far some of the nicest, highest quality stuff I have ever seen and the AP is just a low cost, copy.

You can see it in the thickness of the pipes, welds, and quality of the hardware... it's very noticeable.

I'm not trying to call anyone out, but if you look close enough, you'll see it. You get what you pay for... remember that.

Well... okay.

But what I mean is, so long as nothing cracks or leaks, and everything bolts up, it probably doesn't really matter if it was made in a sweat shop in China or lovingly welded by elves in Wonderland.

How it looks doesn't really matter...

G Fo12ce · 11-18-2010, 10:28 AM

My point though is how often does a guy look at the inlet side of the cat after install? I'm talking about the mesh media inside, not the welds. I'm willing to bet never. How do you know it's not cracked at some point down the road....? I'm not saying anyones stuff here is bad, it's just a concern. I want something designed to handle the heat of turbo charging, even if I never go that way.

CBRich · 11-18-2010, 11:48 AM

I have the ERZ test pipes personally. But I will say that if I were going for high flow cats I would be more inclined to spend a little more money. There's a big difference between a piece of pipe and a cat.

'10Anamoly · 11-18-2010, 12:24 PM

Build quality for sure, BUT the internal quality of the cats is a bit different. While FI and Berk are better quality than most others it seems, they are not up to the quality of the OEM internals or some German high flow cats. OEM cats are not just marked up junkers, the internals are meant to last. Aftermarket OEM cats will last a while but probably not nearly as long as the OEM. Some European companies sell HFC's with extremely nice quality internals but they run about $900+ per pair. At that price, its either buy a mid grade set and replace as needed or go with the quality ones and leave em on for longer.

That being said, I doubt the Euro versions make any more power, just last longer before burning out.

11-17-2010, 04:03 PM	#16 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	I have the ERZ and they are awesome. Fit perfectly and no CEL issues at all. Paired up just fine to my FI CBE. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

11-18-2010, 10:28 AM	#18 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 52	My point though is how often does a guy look at the inlet side of the cat after install? I'm talking about the mesh media inside, not the welds. I'm willing to bet never. How do you know it's not cracked at some point down the road....? I'm not saying anyones stuff here is bad, it's just a concern. I want something designed to handle the heat of turbo charging, even if I never go that way. __________________ Nismo Suspension: New Owners Check Here!

11-18-2010, 12:24 PM	#20 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 16	Build quality for sure, BUT the internal quality of the cats is a bit different. While FI and Berk are better quality than most others it seems, they are not up to the quality of the OEM internals or some German high flow cats. OEM cats are not just marked up junkers, the internals are meant to last. Aftermarket OEM cats will last a while but probably not nearly as long as the OEM. Some European companies sell HFC's with extremely nice quality internals but they run about $900+ per pair. At that price, its either buy a mid grade set and replace as needed or go with the quality ones and leave em on for longer. That being said, I doubt the Euro versions make any more power, just last longer before burning out. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd Last edited by '10Anamoly; 12-02-2010 at 09:05 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z One of the Most Expensive to Insure	SoCal 370Z	Nissan 370Z Pricing / Ordering Discussions	23	11-21-2016 12:02 PM
What's your biggest beef with your 370z/any other car?	Phrausty	Nissan 370Z General Discussions	118	05-17-2010 04:00 PM
Biggest screen	Luv'n my Z	Audio & Video	13	10-06-2009 07:19 PM
World's Most Expensive RV	frost	Other Vehicles	30	09-11-2009 04:14 AM
The Untold Story of the World's Biggest Diamond Heist	theDreamer	The Lounge (Off Topic)	8	03-16-2009 10:22 AM

11-18-2010, 11:48 AM	#19 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	I have the ERZ test pipes personally. But I will say that if I were going for high flow cats I would be more inclined to spend a little more money. There's a big difference between a piece of pipe and a cat.