Status elite proto intake on our project z

LOU@AMPLIFIED · 03-17-2009, 04:22 AM

quality is superb

hand welded, velocity stack, this intake is a prototype, they are still working on one of the brakets and at maybe carbon heatshields.

STATUS ELITE manufactures high quality DRY carbon fiber parts, they have them available for the G37 now but we are working with them to get some parts done for the 370z , engine cover, radiator shourd and maybe b pillars and mirrors.

Im attaching pictures of our G37 engine bay as well

Let me know what you guys thinks

Skorch · 03-17-2009, 02:30 PM

They don't look bad but I doubt much power gains can be had with such short intakes. I'm personally waiting for Stillen's G3s to come out.

RCZ · 03-17-2009, 11:18 PM

Well, I don't think they would run the risk of doing this without J knowing, so I wont comment on that.

Nice intakes indeed.

LOU@AMPLIFIED · 03-18-2009, 01:07 AM

Quote:

Originally Posted by Skorch

They don't look bad but I doubt much power gains can be had with such short intakes. I'm personally waiting for Stillen's G3s to come out.

The g37 dyno's got 13whp with these intakes. They should get the same output or maybe slighty more

Bster · 03-18-2009, 04:53 AM

Quote:

Originally Posted by Skorch

They don't look bad but I doubt much power gains can be had with such short intakes. I'm personally waiting for Stillen's G3s to come out.

If you don't mind me asking why would short intakes be losing more power than, I'm assuming the opposite, longer intakes?

I came from a Mini Cooper S background, and I changed my intake to a shorter ram one from a tuning house called M7, and the gains were quite noticeable. Plus the scream from the Eaton supercharger was greatly enhanced as well!

My opinion is that it seems more logical that a shorter intake will make more gains as opposed to longer, as it'd take less time for the air to travel from the filter to the throttle body.

I'm just wondering and am open to anyone's opinions and discussions!

Black kNight · 03-18-2009, 06:10 AM

^^^^^^^
i think because the short C air intake are near the engine so it will take some hot air and this cause the engine to lose power . on the other hand long intakes are a little down and far from engine so it can get cold air .

hope other members can explain more for you and me

LOU@AMPLIFIED · 03-18-2009, 06:47 AM

Quote:

Originally Posted by Bster

If you don't mind me asking why would short intakes be losing more power than, I'm assuming the opposite, longer intakes?

I came from a Mini Cooper S background, and I changed my intake to a shorter ram one from a tuning house called M7, and the gains were quite noticeable. Plus the scream from the Eaton supercharger was greatly enhanced as well!

My opinion is that it seems more logical that a shorter intake will make more gains as opposed to longer, as it'd take less time for the air to travel from the filter to the throttle body.

I'm just wondering and am open to anyone's opinions and discussions!

From what i know, having intakes on a Normally aspirated engine compared to a forced induction setup such as your supercharger has a totally different outcome. As for the supercharger or turbo, the sooner you get air into the turbo or supercharger, the more efficient your car will run, hence a short ram. As for NA cars like the VQHR on the Z, having long tubes can benefit a little by lowering the intake temperature that usually equates to more HP. For example, its been documented by a independent dyno that the INJEN CAI on the G37 gained as much as 16.5 whp at an average with about 7 pulls. What i like about short ram its easier to clean/replace the filters when its due.

So far, this is the only short ram system that made the most HP on the G37. We will be doing some dyno testing soon with the Z to see what the outcome is.

hope that helps

Bster · 03-18-2009, 12:13 PM

Black knight: I understand where you're coming from!

However, from a purely common sense point of view and nothing to prove it with, when the car is in motion, wouldn't all the pressure from the outside air flush out all the inner hot engine air anyways? I can only imagine that the loss in power will only be in slow maneuvers and/or in stand still traffic... which heat soat will set in anyhow.

Lou@Amplified: I like easy-to-remove filters very much!! Whilst the M7's intake was very good, it was a REAL PITA when it came to removing it for cleaning...

I suppose end of the day personally, I don't believe that just changing the air filter will have too much of a positive effect on performance without a non-restrictive exhaust and a tune... but I do like the noise it makes! Aural pleasures I call it and I'd be looking forward to more data pertaining to this and other filters.

dashiet · 03-19-2009, 02:50 AM

Drool on that carbon fiber. How does the quality compare to seibon?

can we see more pictures of that intake? maybe some of the velocity stack?

RCZ · 03-19-2009, 06:05 PM

Are these also carb certified?

and how come you posted pictures of the JWT pop chargers on a G37 right underneath the STATUS-ELITE ones?

oh...

LOU@AMPLIFIED · 03-19-2009, 10:30 PM

Quote:

Originally Posted by dashiet

Drool on that carbon fiber. How does the quality compare to seibon?

can we see more pictures of that intake? maybe some of the velocity stack?

Sorry to say, i like seibon stuff, but this is DRY CARBON. I would compare to ZELE products but not WET LAY CARBON PARTS.

LOU@AMPLIFIED · 03-19-2009, 10:31 PM

Quote:

Originally Posted by RCZ

Are these also carb certified?

and how come you posted pictures of the JWT pop chargers on a G37 right underneath the STATUS-ELITE ones?

oh...

They are not carb certified yet.

My G37 was sponsored by JWT last year for SEMA

LOU@AMPLIFIED · 03-19-2009, 10:42 PM

Quote:

Originally Posted by Bster

Black knight: I understand where you're coming from!

However, from a purely common sense point of view and nothing to prove it with, when the car is in motion, wouldn't all the pressure from the outside air flush out all the inner hot engine air anyways? I can only imagine that the loss in power will only be in slow maneuvers and/or in stand still traffic... which heat soat will set in anyhow.

Lou@Amplified: I like easy-to-remove filters very much!! Whilst the M7's intake was very good, it was a REAL PITA when it came to removing it for cleaning...

I suppose end of the day personally, I don't believe that just changing the air filter will have too much of a positive effect on performance without a non-restrictive exhaust and a tune... but I do like the noise it makes! Aural pleasures I call it and I'd be looking forward to more data pertaining to this and other filters.

+1. for me. Most intakes make power, its about looks and sound

gromano · 02-10-2010, 02:12 AM

Quote:

Originally Posted by LOU@AMPLIFIED

+1. for me. Most intakes make power, its about looks and sound

When are these gonna be available!!?

CrownR426 · 02-10-2010, 08:52 AM

Didn't these have low gains or no gains at all on the g37?
lol...
I already know they're price is going to be ridiculous.
All show and no go for a raped price...

03-17-2009, 04:22 AM	#1 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	Status elite proto intake on our project z quality is superb hand welded, velocity stack, this intake is a prototype, they are still working on one of the brakets and at maybe carbon heatshields. STATUS ELITE manufactures high quality DRY carbon fiber parts, they have them available for the G37 now but we are working with them to get some parts done for the 370z , engine cover, radiator shourd and maybe b pillars and mirrors. Im attaching pictures of our G37 engine bay as well Let me know what you guys thinks

03-18-2009, 12:13 PM	#8 (permalink)
Bster Base Member Join Date: Feb 2009 Location: Singapore Posts: 174 Drives: '09 PW Z34 Manual Rep Power: 16	Thanks for the replies... Black knight: I understand where you're coming from! However, from a purely common sense point of view and nothing to prove it with, when the car is in motion, wouldn't all the pressure from the outside air flush out all the inner hot engine air anyways? I can only imagine that the loss in power will only be in slow maneuvers and/or in stand still traffic... which heat soat will set in anyhow. Lou@Amplified: I like easy-to-remove filters very much!! Whilst the M7's intake was very good, it was a REAL PITA when it came to removing it for cleaning... I suppose end of the day personally, I don't believe that just changing the air filter will have too much of a positive effect on performance without a non-restrictive exhaust and a tune... but I do like the noise it makes! Aural pleasures I call it and I'd be looking forward to more data pertaining to this and other filters. __________________ TEIN Monoflex with EDFC \| H&R 20mm Spacer \| SPC Rear Camber \| HKS Hi-Power \| Berks High Flow Cat \| Stillen G3 \| EVO R Rear Diffuser \| Blacked out headlights \| Z1 34Row Cooler \| Z1 SS Brake lines

03-19-2009, 06:05 PM	#10 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Are these also carb certified? and how come you posted pictures of the JWT pop chargers on a G37 right underneath the STATUS-ELITE ones? oh... Last edited by RCZ; 03-19-2009 at 06:12 PM.

02-10-2010, 08:52 AM	#15 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 848	Didn't these have low gains or no gains at all on the g37? lol... I already know they're price is going to be ridiculous. All show and no go for a raped price... __________________ Love + Hardwork + Passion RIP SVTRacer

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DDM Project 370Z	M.Bonanni	Member's 370Z Gallery	617	01-07-2010 07:50 PM
Greddy SE Spectrum Elite exhaust	sktvietdragon	Intake/Exhaust	35	04-28-2009 08:01 PM
New Forum Status Icons -- Courtesy of ctzn	AK370Z	Announcements	10	02-18-2009 07:16 PM
New status icons? yay or nay?	AK370Z	The370Z.com Feedback, Suggestions & Questions	24	01-27-2009 11:56 PM

03-17-2009, 02:30 PM	#2 (permalink)
Skorch Enthusiast Member Join Date: Feb 2009 Location: Phoenix, AZ Posts: 469 Drives: 2012 370Z Rep Power: 540	They don't look bad but I doubt much power gains can be had with such short intakes. I'm personally waiting for Stillen's G3s to come out.

03-17-2009, 11:18 PM	#3 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Well, I don't think they would run the risk of doing this without J knowing, so I wont comment on that. Nice intakes indeed.

03-18-2009, 06:10 AM	#6 (permalink)
Black kNight Base Member Join Date: Dec 2008 Location: Oman Posts: 239 Drives: Model 2003 MB C-180k Rep Power: 273	^^^^^^^ i think because the short C air intake are near the engine so it will take some hot air and this cause the engine to lose power . on the other hand long intakes are a little down and far from engine so it can get cold air . hope other members can explain more for you and me

03-19-2009, 02:50 AM	#9 (permalink)
dashiet Base Member Join Date: Mar 2009 Location: Scottsdale, AZ Posts: 2 Drives: 370z Rep Power: 16	Drool on that carbon fiber. How does the quality compare to seibon? can we see more pictures of that intake? maybe some of the velocity stack?