K&n dyno results

kenchan · 10-27-2010, 02:53 PM

also the good about these KN filters is they dont sound like a toilet flushing when you're on the gas.

Cmike2780 · 10-27-2010, 03:02 PM

Your toilet shouldn't growl kenchan, better get that checked out.

kenchan · 10-27-2010, 03:04 PM

Quote:

Originally Posted by Cmike2780

Your toilet shouldn't growl kenchan, better get that checked out.

nismo 1234 · 10-28-2010, 02:35 PM

Quote:

Originally Posted by GZ3

Ok, wait...lets not get carried away...number DO matter. Does you car feel like its running well? Reason i say this is because the DYNO helped me diagnose my old car (350z) was not running well. I went to a dyno jet and pulled 200rwhp stock on a 2003. There were other 2003's stock putting down 225-235. Thats a big difference! I dont if the dyno you went to reads low or whatever, but when i took my car to nissan (with dynos!) they did a compression test and found out i had very bad compression in 3 cyclinders on a 6 month old vehicle( back in 2003).

my car runs pretty good. comparing to other 370z i drove, my car got more torque cuz of intake and exhaust.. maybe its just my head haha.
the low numbers are normal for the dyno i went on. lots of high horsepower cars go there to dyno and found out the dyno reads a lot lower.

TongMan · 10-30-2010, 03:23 AM

Stop using that dyno and tell others to not go there.

oreoleo · 10-30-2010, 10:40 PM

Honestly, unless you dyno'd atop of a mountain, you should never have numbers that low.
It effects your gain results as well, as it will "read" them as low. aka if it's 6hp it's probably 9-10

TBSS2008 · 11-01-2010, 05:48 PM

I am pretty impressed with this Short Ram Intake! I do miss the intake growl of the SRI. I went back to a stock box + smooth tube design because my Takeda SRI turned out to be a crap. Good to see a nice SRI option that increases power.

Jquad · 11-02-2010, 12:50 AM

Nice

ishthemienguy · 11-02-2010, 01:13 AM

I have a question about dyno numbers, doesn't location effect how much power the car is able to produce. for example above or below sea level, with the different concentration of air, so let's say if you are 2,000FT above sea level you will get a lower power reading compared to 2,000FT below sea level?

nismo 1234 · 11-02-2010, 01:46 AM

Quote:

Originally Posted by ishthemienguy

I have a question about dyno numbers, doesn't location effect how much power the car is able to produce. for example above or below sea level, with the different concentration of air, so let's say if you are 2,000FT above sea level you will get a lower power reading compared to 2,000FT below sea level?

the location does matter. the place i go to is higher altitude than most dynos locally. i think "higher altitude" is the right term to say it. i got a better deal there and my previous cars have been done there too. they are a good shop and they are nicer than most shops around (on first impression) and their work and prices are good.
so i wouldnt tell people not to go there, but i wouldnt do any more dyno pulls since its now 90/3 pulls... they gave me 30/3 pulls.. thats why i did the dyno pulls

Nismoracer · 12-03-2010, 12:36 AM

Quote:

Originally Posted by 280z/300zx

Good results. So it looks like the filters are where the gains are rather than the tubing. K&N drop in filters have been shown to give 5-6hp and 5-6 torque. These short tube intakes appear to give 6hp and 8 torque, roughly the same as the drop in filters. So it's a matter of preference of look rather than performance. Good to know. Thanks for the dyno graphs.

Jordo! · 12-03-2010, 12:44 AM

Heart breaker indeed -- that dyno is giving values about 25 - 30% lower than a dynojet.

The altitude may be killing actual power, tho' -- less O2 in the air. Be interesting to see what you make on a dynojet with SAE correction. Not sure what kinds of corrections Mustang dynos are programmed to apply.

A 6% gain from baseline with CBE and K&N sounds about right.

HFC's or TP's will probably net you another 3-5%

10-27-2010, 03:02 PM	#17 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	Your toilet shouldn't growl kenchan, better get that checked out. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

10-30-2010, 10:40 PM	#21 (permalink)
oreoleo Base Member Join Date: Jan 2010 Location: Philadelphia PA Posts: 54 Drives: 09 Infiniti G37S 6MT Rep Power: 15	Honestly, unless you dyno'd atop of a mountain, you should never have numbers that low. It effects your gain results as well, as it will "read" them as low. aka if it's 6hp it's probably 9-10 __________________ '09 6mtS OB Coupe\|KW V3\|SPC\|Stillen 3G\|Invidia Gemini CB+HFC\|Nismo S/S\|Hotchkis

11-01-2010, 05:48 PM	#22 (permalink)
TBSS2008 Base Member Join Date: Apr 2009 Location: Texas Posts: 195 Drives: 11 Corvette GS 6spd Rep Power: 16	I am pretty impressed with this Short Ram Intake! I do miss the intake growl of the SRI. I went back to a stock box + smooth tube design because my Takeda SRI turned out to be a crap. Good to see a nice SRI option that increases power. __________________ 2011 Black Corvette Grand Sport 6spd \| NNP Daul Mode Exhaust 2008 Trail Blazer SS Black \| SuperChips Tune 2009 370Z Black 7AT Touring Sport (TRADED)

11-02-2010, 12:50 AM	#23 (permalink)
Jquad A True Z Fanatic Join Date: Apr 2010 Location: Ny Posts: 1,391 Drives: 2k10Z34Pw Rep Power: 17	Nice __________________ \|\|F.I.CBE 18" CF muffler\|\|Injen CAI\|\|CF Bpillars\|\|CF Stage 1 Side mirror\|\|CS Amuse Kit\|\|JquadHeadlights\|\|3mTB35%Tint\|\|Work Gnosis GS2\|\| Wish List==>\|\|GTM TT\|\|Coils\|\|Camber Arms\|\|Tires\|\|Wing\|\|Hotchkis Sways\|\|

12-03-2010, 12:44 AM	#27 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Heart breaker indeed -- that dyno is giving values about 25 - 30% lower than a dynojet. The altitude may be killing actual power, tho' -- less O2 in the air. Be interesting to see what you make on a dynojet with SAE correction. Not sure what kinds of corrections Mustang dynos are programmed to apply. A 6% gain from baseline with CBE and K&N sounds about right. HFC's or TP's will probably net you another 3-5% __________________ Enjoy it. Destroy it. Last edited by Jordo!; 12-03-2010 at 12:47 AM.

10-27-2010, 02:53 PM	#16 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	also the good about these KN filters is they dont sound like a toilet flushing when you're on the gas.

10-30-2010, 03:23 AM	#20 (permalink)
TongMan A True Z Fanatic Join Date: Feb 2010 Location: NorCal Posts: 1,297 Drives: 2013 Nissan GTR Rep Power: 715	Stop using that dyno and tell others to not go there.

11-02-2010, 01:13 AM	#24 (permalink)
ishthemienguy Base Member Join Date: Aug 2009 Location: california, Sacramento Posts: 124 Drives: anything Rep Power: 16	I have a question about dyno numbers, doesn't location effect how much power the car is able to produce. for example above or below sea level, with the different concentration of air, so let's say if you are 2,000FT above sea level you will get a lower power reading compared to 2,000FT below sea level?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mustang Dyno Results!	Nitex	Intake/Exhaust	21	06-28-2014 06:22 PM
Berk HFC dyno results	Red370	Intake/Exhaust	36	09-24-2013 04:00 PM
Greddy Ti-c dyno results	nismo 1234	Intake/Exhaust	16	10-02-2012 11:25 PM
Dyno Results	TonyBPD	Engine & Drivetrain	39	03-24-2010 05:09 AM
NEW Dyno results are in....	2theextreme	Nissan 370Z General Discussions	56	08-22-2009 09:08 PM