Stillen air intake gen 2 vs gen 3 ??? Need help here!!

OhYeah · 10-13-2010, 02:58 AM

Hello all

I'm going to install stillen cold air intake.
Wht is different between gen 2 and 3?

I know that Gen 3 can give more power around 17.5whp
but what about Gen2

Are their any point for me to concern?
-Engine problem?
- Is it true that engine will have shorter durable?
- Any torque gain?
-Which one is better?
- Any intake can give more gain?

I drove 220-250km/h everyday to school with my friends. Really need your opinion here. Thx for reading.

BOLIO 671 · 10-13-2010, 07:38 AM

Based on the reviews and info that I have done on the forum, short ram intakes such as the Stillen G2's don't give too much power/torque due to the constant heat that the filters are exposed to in the engine bay...This is the reason why I opted to purchase the Stillen G3's...They are positioned right in the front area of the front bumper to avoid hydrolock....I have yet to type up my review as I want to upload all my pics...I can tell you that the butt dyno approves and I definately feel the gains on top of the Berk CBE/HFC combo that I already had installed...

Good luck with the decision.

BOLIO 671 · 10-13-2010, 07:59 AM

Despite my previous post...the following thread was the most impressive in regards to the G2 short CAI's.

Stillen CAI and Invidia CBE

Take a look at it and make your own assesment!

kenchan · 10-13-2010, 08:10 AM

I think there were fitment issues with the Gen2.

Might want to check out the R2C intake if short ram.

OhYeah · 10-13-2010, 02:39 PM

Billion thx, but what is CBE?

Do I have to worry about dirt getting through my engine
by G3 intake???
any harm?

Or no need to worry just install G3

Hey what about the sound is the sound more aggressive than G2??

Thx again ^^

Ronin06 · 06-10-2016, 08:10 AM

Quote:

Originally Posted by BOLIO 671

Despite my previous post...the following thread was the most impressive in regards to the G2 short CAI's.

Stillen CAI and Invidia CBE

Take a look at it and make your own assesment!

Thanks for the link.

To summarize the original question G2 vs G3.

G2
Pro: Easier install, easier maintenance
Con: lower hp

G3
Pro: More hp, air is colder
Con: Install remove front bumper, maintenance remove front bumper to clean filter.

Nixin · 06-10-2016, 08:27 AM

CBE = cat back exhaust.

Chuck33079 · 06-10-2016, 08:58 AM

2010, guys.

10-13-2010, 02:58 AM	#1 (permalink)
OhYeah Base Member Join Date: Jan 2010 Location: Thailand Posts: 79 Drives: 370z 40th Rep Power: 15	Stillen air intake gen 2 vs gen 3 ??? Need help here!! Hello all I'm going to install stillen cold air intake. Wht is different between gen 2 and 3? I know that Gen 3 can give more power around 17.5whp but what about Gen2 Are their any point for me to concern? -Engine problem? - Is it true that engine will have shorter durable? - Any torque gain? -Which one is better? - Any intake can give more gain? I drove 220-250km/h everyday to school with my friends. Really need your opinion here. Thx for reading. Last edited by OhYeah; 10-13-2010 at 03:23 AM.

10-13-2010, 07:38 AM	#2 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Based on the reviews and info that I have done on the forum, short ram intakes such as the Stillen G2's don't give too much power/torque due to the constant heat that the filters are exposed to in the engine bay...This is the reason why I opted to purchase the Stillen G3's...They are positioned right in the front area of the front bumper to avoid hydrolock....I have yet to type up my review as I want to upload all my pics...I can tell you that the butt dyno approves and I definately feel the gains on top of the Berk CBE/HFC combo that I already had installed... Good luck with the decision. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

10-13-2010, 07:59 AM	#3 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Despite my previous post...the following thread was the most impressive in regards to the G2 short CAI's. Stillen CAI and Invidia CBE Take a look at it and make your own assesment! __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

06-10-2016, 08:58 AM	#8 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	2010, guys. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB Stillen G3 Intake	lorenrand	Wanted	0	09-14-2010 03:42 PM
Stillen Gen 2 intake	JvKintheUSA	Intake/Exhaust	15	09-26-2009 04:45 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 01:41 PM
Berk HFC's, Stillen Intake, and a Stillen Dual Exhaust....	2theextreme	The Lounge (Off Topic)	8	06-18-2009 11:01 PM

10-13-2010, 08:10 AM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	I think there were fitment issues with the Gen2. Might want to check out the R2C intake if short ram.

10-13-2010, 02:39 PM	#5 (permalink)
OhYeah Base Member Join Date: Jan 2010 Location: Thailand Posts: 79 Drives: 370z 40th Rep Power: 15	Billion thx, but what is CBE? Do I have to worry about dirt getting through my engine by G3 intake??? any harm? Or no need to worry just install G3 Hey what about the sound is the sound more aggressive than G2?? Thx again ^^

06-10-2016, 08:27 AM	#7 (permalink)
Nixin A True Z Fanatic Join Date: Sep 2015 Location: GWN Posts: 3,488 Drives: Goodbye Z! Rep Power: 19833	CBE = cat back exhaust.