Announcement!!! My New Manifold!!!!

christian370z · 09-27-2010, 12:55 AM

Quote:

Originally Posted by lastblueprint

The Manifold itself is OE quality; it looks stock without the MD cover. If you compare the Stock VS MD, you will see the differences, there is no need for tuning it, but it will help a lot, just the fact that it is allowing more air to run through. The combination with aftermarket intakes and exhaust, there is no telling what HP and Tq will display on dynos. Right now the MD exhaust is on its works. Let me say, it will raise the bar in performance. No one has ever seen what this exhaust will do. The technology on this is mind blowing. I’m not hyping it up in no way shape or form, I have seen it, I have seen the design and I have seen what it’s going to do, great exhaust ever.
As for the M370, My review on this product is all around great, installation very easy. Performs great, you can still use the stock engine cover for a more stealth look; the tone of motor is different, more aggressive. But be careful, the sounds of it is addicting and you’ll run out of gas fast, lol

So, seat of pants how much hp/tq do you think you picked up? I am worried that doing this along with my current breathing mods will gain less (if there are gains to be had) but that can only be answered with a before and after dyno. If there are 10-20 rwhp to be gained, I will be very interested.

I will give Motordyne a call tomorrow to see what is up, but I would definately use my OEM engine cover over the Motordyne version.

Raven · 09-27-2010, 02:42 AM

wacthing...

Waiz · 09-27-2010, 03:03 AM

En para mas informacion.

WarmAndSCSI · 09-27-2010, 04:13 AM

This seems dubious, from the OP:

Quote:

You will feel the kick, worst case, on a 100 degree day you’re looking to gain an additional 12hp/16tq, that’s the worst case.
When this manifold went through the R&D, it was tested in low temperature and high temperature for a more accurate reading. From the dyno testing, 12hp/16tq was the lowest gains, it was consistent but the lowest with the highest atmosphere temperature. Now remember, many factors come to play when doing a dyno reading.
It’s not 50hp gain, it’s more in the lines of 12hp being the lowest to 25hp being the highest from what I witness myself.
Read more at Announcement!!! My New Manifold!!!! - MY350Z.COM Forums

Reading the developments form MotorDyne, seems like this is kind of a VQ35HR-VQ37VHR manifold hybrid. It is indeed a modified stock manifold of some sort.

G37sHKS · 09-27-2010, 04:04 PM

i had spoken to Motordyne for a month now.. i told them to tell me once this manifold is released.

and this is true this manifold was released only 1 weeks ago only..

the price of it is 699$

I was told that this manifold is not for HR.. its only for VHR.. there is a reason y it called M"370"..

but after seeing this thread on 350z forum.. Im totally confused :S...

Still waiting for dyno...

jran76 · 09-27-2010, 04:23 PM

Seems pretty easy to understand to me....

Quote:

Originally Posted by Hydrazine

Midz350,

It is a modified HR manifold. Similar to how the MREV2 was done but in this case, it requires significant modification to allow it to even fit onto the VHR engine.

Nissan did not want this manifold to be swapped onto the VHR engine so they made a series of deliberate design alterations between the two to make it impossible to swap them.

Hence the CNC modifications, hoses, fittings, new bolts and top plate.

vipor · 09-27-2010, 04:27 PM

Looks like some sensors are moved/missing...

G37sHKS · 09-27-2010, 05:18 PM

Quote from MotorDyne.

I think you guys are right.. maybe its same design as 350z Manifold but made to fit the VHR..

Quote:

Originally Posted by Hydrazine

The 3.7 liter engine is losing a lot of "potential" area under the curve by having short runners.

The 3.5 liter engine is losing peak power by having longer runners.

Each stock engine has a different compromise within their stock power curve.

So the thing to do is combine the two curves and switch between one or the other at their crossover point. (RPM dependant).

This way the best of both can be attained... for both engines!

Simple in concept but it will be a great engineering challenge to implement.
Read more at Early stages of HR/VHR intake manifold dyno testing. - MY350Z.COM Forums

christian370z · 09-27-2010, 07:38 PM

Quote:

Originally Posted by G37sHKS

Quote from MotorDyne.

I think you guys are right.. maybe its same design as 350z Manifold but made to fit the VHR..

Thanks for the link! Hey, if it works then I could care less where it came from.

ARFCOM · 09-27-2010, 09:34 PM

Oh man... I hope this doesn't turn into another Stillen supercharger kit debacle with 'extensive engineering & testing'.

drew · 09-27-2010, 10:38 PM

in for more info.

98intrigue · 09-28-2010, 12:01 AM

I'll hopefully be posting a pre/post dyno this weekend. Stay tuned.

Zsteve · 09-28-2010, 12:04 AM

cover looks kinda cheap, like they didnt put much thought into the design of it.

red6spd · 09-28-2010, 12:11 AM

700 beans is alot. Lets see some good numbers and Ill swipe my card in a heart beat.

98intrigue · 09-28-2010, 12:55 AM

Quote:

Originally Posted by Zsteve

cover looks kinda cheap, like they didnt put much thought into the design of it.

It doesn't have to look good to perform well. The plenum is kind of an eye sore, so I'll just keep it hidden with the engine cover.

09-27-2010, 04:04 PM	#35 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	i had spoken to Motordyne for a month now.. i told them to tell me once this manifold is released. and this is true this manifold was released only 1 weeks ago only.. the price of it is 699$ I was told that this manifold is not for HR.. its only for VHR.. there is a reason y it called M"370".. but after seeing this thread on 350z forum.. Im totally confused :S... Still waiting for dyno... Last edited by G37sHKS; 09-27-2010 at 04:06 PM.

09-27-2010, 04:27 PM	#37 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	Looks like some sensors are moved/missing... __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

09-28-2010, 12:01 AM	#42 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	I'll hopefully be posting a pre/post dyno this weekend. Stay tuned. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

09-28-2010, 12:04 AM	#43 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	cover looks kinda cheap, like they didnt put much thought into the design of it. __________________ 2010 LS3 C6 Silver coupe corvette

09-28-2010, 12:11 AM	#44 (permalink)
red6spd A True Z Fanatic Join Date: Apr 2010 Location: Long Island NY Posts: 3,277 Drives: 2010 Z Coupe M6 SPT Rep Power: 21	700 beans is alot. Lets see some good numbers and Ill swipe my card in a heart beat. __________________ 2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness. ???Whp ???WTQ (Will find out come spring time)

09-27-2010, 02:42 AM	#32 (permalink)
Raven Base Member Join Date: Jul 2010 Location: Valley Village Posts: 138 Drives: Scion TC Rep Power: 15	wacthing...

09-27-2010, 03:03 AM	#33 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	En para mas informacion.

09-27-2010, 09:34 PM	#40 (permalink)
ARFCOM Base Member Join Date: Jul 2010 Location: Missouri Posts: 75 Drives: 2010 370Z Red 6 spd Rep Power: 15	Oh man... I hope this doesn't turn into another Stillen supercharger kit debacle with 'extensive engineering & testing'.

09-27-2010, 10:38 PM	#41 (permalink)
drew Base Member Join Date: Aug 2010 Location: S.Korea Posts: 39 Drives: 49cc moped Rep Power: 15	in for more info.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5Zigen EXM-SP Manifold	370Ztune	Intake/Exhaust	20	10-15-2015 10:38 PM
GTR conversion manifold?	1slow370	Intake/Exhaust	16	07-06-2010 03:09 PM
Product Announcement HKS New Turbo Timers	Slidefox	Forced Induction	20	03-30-2010 04:25 AM
Intensepower.com Announcement	INTENSEPOWER	Nissan 370Z General Discussions	0	09-29-2009 12:39 PM
Public Service Announcement	zZSportZz	Nissan 370Z General Discussions	14	06-27-2009 09:45 AM