Stillen CAI and Invidia CBE

Dsphoto · 10-05-2010, 09:18 PM

Tried to post the image again. Can anyone help me here? I put in the link to the photo wrapped in the [IMG] tags to no avail!

coaster · 10-05-2010, 09:27 PM

Nice gains. Thanks for the dyno. Also, seems like the car rev'd passed 8k rpm?

370Z JT · 10-06-2010, 03:27 AM

wow just wow! makes me wanna order the STILLENS ASAP.

Dsphoto · 10-06-2010, 07:08 AM

RPM calibration was not 100%. RPM cut on all pulls was 7500.

Coaster: thanks for putting up the chart. How did you do that? I'm a photographer and very experienced in digital imaging but could not make that work. Very frustrating.

DS

Juruki · 10-06-2010, 12:34 PM

looks like stillen CAI gave you most of your gains. thx for sharing

370Z JT · 10-06-2010, 12:42 PM

was the bumper off when the stillens were dyno'd?

felt · 10-06-2010, 02:14 PM

What generation stillen intakes

Dsphoto · 10-07-2010, 07:19 AM

I opted for the G2 CAI so the bumper wasn't off. I elected to go for the reduced maintenance hassles. I think that the total gain is more evenly divided between the two bolt ons than the dyno results indicate. The improved pumping efficiency resultant from back pressure reductions on both sides allowed the engine to breath. Had I installed the CAI first and the CBE second the results would have been the opposite. Stillen's dynos results show only 1.5hp increase in max hp and 9 hp in midrange, far below my total numbers.
Most important for everyone to see is that by improving pumping efficiency on only one side of the motor does not allow this wonderful engine to really sing. You need to improve both intake and exhaust to realize major gains.

christian370z · 10-07-2010, 11:20 AM

Quote:

Originally Posted by Dsphoto

RPM calibration was not 100%. RPM cut on all pulls was 7500.

Coaster: thanks for putting up the chart. How did you do that? I'm a photographer and very experienced in digital imaging but could not make that work. Very frustrating.

DS

I think the mistake you were making was wrapping the picture in [IMG]...[IMG] when you missed just one little backwards slash as it should be [IMG]...[/IMG]

Dsphoto · 10-07-2010, 07:31 PM

I did the tags correctly. Linked to my pbase site. didn't work though.

370Z JT · 10-08-2010, 12:40 AM

Quote:

Originally Posted by Dsphoto

I opted for the G3 CAI so the bumper wasn't off. I elected to go for the reduced maintenance hassles. I think that the total gain is more evenly divided between the two bolt ons than the dyno results indicate. The improved pumping efficiency resultant from back pressure reductions on both sides allowed the engine to breath. Had I installed the CAI first and the CBE second the results would have been the opposite. Stillen's dynos results show only 1.5hp increase in max hp and 9 hp in midrange, far below my total numbers.
Most important for everyone to see is that by improving pumping efficiency on only one side of the motor does not allow this wonderful engine to really sing. You need to improve both intake and exhaust to realize major gains.

To clarify you have the Stillen Gen 3 CAI and not the Gen 2 right? I would think the Gen 2 are easy to maintain than the Gen 3.

BOLIO 671 · 10-08-2010, 01:07 AM

Very Impressive Gains...

Dsphoto · 10-08-2010, 05:30 AM

Typo. Sorry. I have the g2

felt · 10-08-2010, 07:32 AM

Quote:

Originally Posted by 370Z JT

To clarify you have the Stillen Gen 3 CAI and not the Gen 2 right? I would think the Gen 2 are easy to maintain than the Gen 3.

Why is that ?

Dsphoto · 10-08-2010, 04:27 PM

The gen 3 mounts the air filters behind the bumper while the gen2 mounts inside the engine compartment. No need to remove the front bump to clean the filters.

10-05-2010, 09:18 PM	#16 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 15	Tried to post the image again. Can anyone help me here? I put in the link to the photo wrapped in the [IMG] tags to no avail! __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected!

10-05-2010, 09:27 PM	#17 (permalink)
coaster Base Member Join Date: Dec 2008 Location: San Jose Posts: 249 Drives: 09 370z PW 6MT Rep Power: 17	Nice gains. Thanks for the dyno. Also, seems like the car rev'd passed 8k rpm? __________________ Cars owned: DC2/AP1/NA2/FG2/Z33/Z34/R35 Last edited by coaster; 10-05-2010 at 09:59 PM.

10-06-2010, 03:27 AM	#18 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	wow just wow! makes me wanna order the STILLENS ASAP. dvdnht likes this. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

10-06-2010, 07:08 AM	#19 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 15	RPM calibration was not 100%. RPM cut on all pulls was 7500. Coaster: thanks for putting up the chart. How did you do that? I'm a photographer and very experienced in digital imaging but could not make that work. Very frustrating. DS __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected!

10-06-2010, 12:42 PM	#21 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	was the bumper off when the stillens were dyno'd? __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

10-06-2010, 12:34 PM	#20 (permalink)
Juruki Track Member Join Date: Mar 2010 Location: SoCal Posts: 965 Drives: 370Z Tour/Sport/Navi Rep Power: 16	looks like stillen CAI gave you most of your gains. thx for sharing

10-06-2010, 02:14 PM	#22 (permalink)
felt Base Member Join Date: Oct 2010 Location: inland empire Posts: 29 Drives: mazdaspeed3 Rep Power: 15	What generation stillen intakes

10-07-2010, 07:19 AM	#23 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 15	I opted for the G2 CAI so the bumper wasn't off. I elected to go for the reduced maintenance hassles. I think that the total gain is more evenly divided between the two bolt ons than the dyno results indicate. The improved pumping efficiency resultant from back pressure reductions on both sides allowed the engine to breath. Had I installed the CAI first and the CBE second the results would have been the opposite. Stillen's dynos results show only 1.5hp increase in max hp and 9 hp in midrange, far below my total numbers. Most important for everyone to see is that by improving pumping efficiency on only one side of the motor does not allow this wonderful engine to really sing. You need to improve both intake and exhaust to realize major gains. __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected! Last edited by Dsphoto; 10-08-2010 at 05:31 AM.

10-07-2010, 07:31 PM	#25 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 15	I did the tags correctly. Linked to my pbase site. didn't work though. __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected!

10-08-2010, 01:07 AM	#27 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Very Impressive Gains... __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

10-08-2010, 05:30 AM	#28 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 15	Typo. Sorry. I have the g2 __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected!

10-08-2010, 04:27 PM	#30 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 15	The gen 3 mounts the air filters behind the bumper while the gen2 mounts inside the engine compartment. No need to remove the front bump to clean the filters. __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
invidia hfc?	370z_2910	Intake/Exhaust	1	08-19-2010 09:00 AM
Give up on Berk? Go with Invidia?	Dembflyr	Intake/Exhaust	40	08-06-2010 06:37 AM
Invidia Genini CB exhaust	Big J	Parts for sale (Private Classifieds)	3	07-20-2010 01:51 PM
INVIDIA Test Pipes	Kastley85891	Parts for sale (Private Classifieds)	20	07-13-2010 12:01 PM
Invidia Gimini	The BlueMax	Intake/Exhaust	65	04-28-2010 02:58 AM