So after a few months of researching and looking for clips on the Berk HFC, i finally decided to pull the trigger and pick a set up for myself. I
|
|
LinkBack | Thread Tools | Display Modes |
08-28-2010, 12:46 AM | #1 (permalink) |
Track Member
Join Date: Jan 2009
Location: WA
Posts: 504
Drives: 2010-370z-Red-6 SPD
Rep Power: 17 |
Berk High Flow Cat Install/Review.
So after a few months of researching and looking for clips on the Berk HFC, i finally decided to pull the trigger and pick a set up for myself. I called and spoke to Rob and Laura who are both very friendly and had my HFC's ordered and out for shipping the same day. Order placed on August 23rd received on the 26th, pretty fast, thanks guys!
So this is how the packaged arrived, no weird holes or questioning on if the package got damaged. went to see my mechanic Brandon at Axiom Motorsports located in Lakewood, WA. For you local 370z owners looking for a shop, go here! about 2 hours later, installed and pics taken to show quality of Berk HFC's and how well they mate together. finally done and back on the ground. Installation: Overrall the installation went pretty smooth considering the "evil bolts" while Brandon was loosening them they had snapped, one on both sides, no problem though as they are replaced by new ones provided with the BERK HFC. One thing im glad of, is even though many of you are mechanically inclined, i am not. I for one am glad that i went to a mechanic to get them installed because if you don't have all the tools required, (which I don't) you don't want to stop half way, because of a broken ratchet etc. Impressions: When the car was first turned on after the install, you immediately hear the deeper tone upon start up, it last for a few seconds, then as it gets warmer, you don't really hear anything. At idle it sounds pretty much stock. When you rev it though you do hear the deeper tone between the 2-3k on the rpms like others have mentioned it's about 3 times deeper than stock. At idle, when you press the gas and let off, you will hear the infamous hiss, i believe this is normal for our cars, but honestly i love it! it sounds pretty cool. While driving, you hear a different tone after the 3.5k mark on the RPMs, (i am shifting under 4k because i am still adhering to the proper break in procedure) it does not sound the same as the 350z "growl" it's a little bit deeper. On one shift i changed gears at about 4.2 and WOW, i can imagine how great this would sound when i am able to push it a little more. As others have posted the gains with this single mod is pretty darn good, i cannot comment on power increase as my main focus was increasing the volume on the stock exhaust. Overall i am happy with how this mod has increased the sound of the 370z's stock exhaust. It is very quiet while keeping within the daily drivability range. But after you pass the 3.5k mark on the RPM's you will hear the z come to life. There are some negative aspects though, i do find myself shifting in the higher RPM range just so i can hear th HFC's bring life to my stock exhaust therefore decreasing my gas mileage and increasing the pressure on my right foot which could possibly cause a strain in my ankle. thanks for reading! next mod: BERK CBE! |
08-28-2010, 01:03 AM | #2 (permalink) |
Track Member
Join Date: Feb 2010
Location: Indiana
Posts: 886
Drives: G37S Sedan
Rep Power: 16 |
Nice review. +1
If you like the sound now, just wait til you pair it with the CBE.
__________________
2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD |
08-28-2010, 01:18 AM | #3 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: Newport Beach
Posts: 3,900
Drives: 2010 370Z/Saab 900se
Rep Power: 432 |
If you aren't planning on going with a full cat-back exhaust, I highly recommend getting an aftermarket Y pipe. I got a Tanabe Y pipe because the OEM piece is the most restrictive part of the exhaust after the stock cat. I agree with your review though, this is an awesome first mod and really opens the exhaust up after 4k rpm.
This picture shows just how bad the stock y pipe is, FYI the diameter of the Berk HFC is the same as the Tanabe Y pipe for optimal flow:
__________________
-320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob |
08-28-2010, 11:04 AM | #5 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: Newport Beach
Posts: 3,900
Drives: 2010 370Z/Saab 900se
Rep Power: 432 |
__________________
-320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob |
08-28-2010, 11:13 PM | #7 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: Newport Beach
Posts: 3,900
Drives: 2010 370Z/Saab 900se
Rep Power: 432 |
No problem, you are very welcome. I love this combination but if you are planning on going with a full cat-back exhaust eventually, I would save your money on the Y pipe.
__________________
-320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob |
11-08-2011, 12:33 PM | #9 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: Newport Beach
Posts: 3,900
Drives: 2010 370Z/Saab 900se
Rep Power: 432 |
You can most likely get close to 300whp, but intakes are required to definitely get past 300whp. Although, I put down 310 whp with a tune, HFCs, G3 intakes and a Tanabe Y pipe so it might be possible given a dyno that doesn't read low or high.
__________________
-320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob |
11-09-2011, 01:57 AM | #11 (permalink) |
A True Z Fanatic
Join Date: Dec 2010
Location: L.I., NY
Posts: 5,307
Drives: Everything
Rep Power: 26 |
Do you have any issues with the HFC's sitting lower? Also I heard there were check engine light issues, not sure though.
__________________
|2013 Audi S4|Ibis White/Black|S-Tronic P+| |2013 370z|PearlWhite/Persimmon|Touring/Sport/Nav|F.I. CBE 18" CF| |Sold|2011 370z|Gun Metallic|Touring/Sport/Nav| |
03-23-2012, 01:15 AM | #12 (permalink) |
Base Member
Join Date: Mar 2012
Location: Austin
Posts: 38
Drives: 2012 Nismo 370z
Rep Power: 13 |
I'd definitely like to do this to my Nismo. It's too quiet. Would this void my warranty though? I mean. Would the dealership be able to tell if my exhaust was modified if I took it for a routine oil change and maintenance? I know intakes in general won't void the warranty if the dealer installs those.
|
03-23-2012, 04:07 PM | #13 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: Newport Beach
Posts: 3,900
Drives: 2010 370Z/Saab 900se
Rep Power: 432 |
Technically, any modification can be used as an reason for a dealer to deny your warranty. The only thing that can be a safe guard is if you have them install the parts and have them expressly note that it will not void your warranty. Or you can find a mod friendly dealer, your local area forum can probably recommend these if you are interested.
__________________
-320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob |
09-10-2013, 02:57 PM | #14 (permalink) | |
Base Member
Join Date: Sep 2013
Location: N.E. Pennsylvania
Posts: 37
Drives: 2013 370z Nismo 6spd
Rep Power: 12 |
warranty question
I am looking at installing these on my 2013 370 nismo. when you installed did the hfc's void any warranty?
Quote:
|
|
09-10-2013, 03:00 PM | #15 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29539 |
Your answer is in the post directly above yours. Nothing "voids your warranty". A warranty claim can be denied if the dealer can show the modification directly resulted in the failure.
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ERZ Performance High Flow Cats, Install and Review Thread | spearfish25 | Intake/Exhaust | 219 | 02-20-2013 09:33 AM |
Berk High Flow Cats | Big C | Parts for sale (Private Classifieds) | 2 | 07-23-2010 05:33 PM |
looking to buy Berk High Flow Cats | zulus370Z | Parts for sale (Private Classifieds) | 0 | 08-22-2009 09:45 PM |