What can I tell the shop to get this adjusted? (Stillen CBE)

pty370z · 07-29-2010, 03:25 PM

Hi guys,

I managed to get my Stillen CBE and Berk HFC's installed. I am taking the car to a shop because I think it needs some adjustment and I'm not really sure how to accomplish this.

This is only on the right side. The left side is centered but also has some gap between the tip and the bumper.

But, a picture's worth a thousand words. Any input appreciated.. Thanks in advance..

Cmike2780 · 07-29-2010, 04:44 PM

How does the other exhaust tip look? Do you have one directly behind showing both?

Try sending Josh at Stillen a PM. They will know more about how to fix it .

pty370z · 07-29-2010, 05:01 PM

Quote:

Originally Posted by Cmike2780

How does the other exhaust tip look? Do you have one directly behind showing both?

Try sending Josh at Stillen a PM. They will know more about how to fix it .

I do have a couple of pics like that but I don't have them here at work. I will upload them in a couple of hours when I get home.

Cmike2780 · 07-29-2010, 05:16 PM

If your OEM exhaust tips were off centered, then these will likely be off centered also. It seems way off though, so I would try having them loosen the entire CBE bolts, align & retighten.

Also, when looking down, do the exhaust tips stick out the same amount? Is either one on an angle?

pty370z · 07-29-2010, 05:24 PM

Quote:

Originally Posted by Cmike2780

If your OEM exhaust tips were off centered, then these will likely be off centered also. It seems way off though, so I would try having them loosen the entire CBE bolts, align & retighten.

Also, when looking down, do the exhaust tips stick out the same amount? Is either one on an angle?

My OEM tips were right on the spot, they were perfectly centered.

The right tip sticks out a little bit more than the left one. If you're looking from the top up, the left tip is out so you can exactly read the word STILLEN. The right tip is out so you can read STILLEN + a pinky finger distance.

Maybe the tubes need to be slipped in better in the joints with the Y-pipe..??

07-29-2010, 03:25 PM	#1 (permalink)
pty370z Track Member Join Date: Apr 2009 Location: Panama City, Panama Posts: 654 Drives: over the speed limit Rep Power: 17	What can I tell the shop to get this adjusted? (Stillen CBE) Hi guys, I managed to get my Stillen CBE and Berk HFC's installed. I am taking the car to a shop because I think it needs some adjustment and I'm not really sure how to accomplish this. This is only on the right side. The left side is centered but also has some gap between the tip and the bumper. But, a picture's worth a thousand words. Any input appreciated.. Thanks in advance.. __________________ 2010 Solid Red 370Z * *Touring-Sport-6MT Black Interior Performance:** STILLEN * BERK * UR * MISHIMOTO * K&N * Z1 * ZSPEED * UPREV * DBA Interior: GT-R Red Start/Stop Button * MSA Floor Mats * PW:JDM Exterior: INGS+1 * SEIBON * FUJIMURA * PW:JDM * UAM * KICS * VOLK Last edited by pty370z; 07-29-2010 at 05:02 PM.

07-29-2010, 04:44 PM	#2 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	How does the other exhaust tip look? Do you have one directly behind showing both? Try sending Josh at Stillen a PM. They will know more about how to fix it . __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

07-29-2010, 05:16 PM	#4 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	If your OEM exhaust tips were off centered, then these will likely be off centered also. It seems way off though, so I would try having them loosen the entire CBE bolts, align & retighten. Also, when looking down, do the exhaust tips stick out the same amount? Is either one on an angle? __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 01:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 06:20 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 01:41 PM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 03:21 AM
Berk HFC's, Stillen Intake, and a Stillen Dual Exhaust....	2theextreme	The Lounge (Off Topic)	8	06-18-2009 11:01 PM