Dyno quirks - three cars with mods and no gains show on dyno, gotta be the heat!

370Zsteve · 07-26-2010, 02:49 PM

Quote:

Originally Posted by '10Anamoly

Actually thats all James had done was the Gen 3 install and he had like 1hp gain from the last dyno peak and little to no gains throughout, again its due to the heat and humidity.

If the loss is 4% to 5% reasonably for the atmospheric changes, then we all should be right on the money for gains. 276whp with 4.5% added in would be about 288-289whp which makes sense for a full exhaust or Gen 3 install up from baseline of 276-277whp.

I'm not going to dyno again though until its a reasonable 80ish degrees, now that I got rid of that crap OEM muffler. It feels like the same gains I got with the X-Pipe added in again with straight through Magnaflows added and the rear muffler gone. Hoping for 285-290whp, it definately is fast now.

Why not wait for September and nice cool temps? I agree on your numbers, when I installed my Berk CBE I went from 278WHP to 294WHP under similar temps (low 60's) and low humidity. I then installed Gen3s and showed "no gain" at 95F and high humidity. Something tells me when I do another pull come September, I'll be over 300WHP.

Z1804 · 07-26-2010, 03:10 PM

Quote:

Originally Posted by 370Zsteve

Why not wait for September and nice cool temps? I agree on your numbers, when I installed my Berk CBE I went from 278WHP to 294WHP under similar temps (low 60's) and low humidity. I then installed Gen3s and showed "no gain" at 95F and high humidity. Something tells me when I do another pull come September, I'll be over 300WHP.

The Berk CBE sounds great. I'm not surprised you got that much gains from it. With the 8 month wait I had to go with the Boombop Shop CBE. I should receive delivery sometime late this week or next week, so I'm post a video. But you're rignt, probably will not get another dyno until September-October.

daisuke149 · 07-26-2010, 05:12 PM

Quote:

Originally Posted by Z1804

The Berk CBE sounds great. I'm not surprised you got that much gains from it. With the 8 month wait I had to go with the Boombop Shop CBE. I should receive delivery sometime late this week or next week, so I'm post a video. But you're rignt, probably will not get another dyno until September-October.

No see you stupid!!!...

(see what i did there!)

Z1804 · 07-26-2010, 05:36 PM

Quote:

Originally Posted by 370Zsteve

Why not wait for September and nice cool temps? I agree on your numbers, when I installed my Berk CBE I went from 278WHP to 294WHP under similar temps (low 60's) and low humidity. I then installed Gen3s and showed "no gain" at 95F and high humidity. Something tells me when I do another pull come September, I'll be over 300WHP.

Quote:

Originally Posted by daisuke149

No see you stupid!!!...

(see what i did there!)

You lost me dude.....

daisuke149 · 07-26-2010, 05:56 PM

Quote:

Originally Posted by Z1804

You lost me dude.....

haha i jsut copied what you said and put it in a diff thread. is all.

'10Anamoly · 07-26-2010, 07:16 PM

Anybody in ATL have a digital camcorder that they might be willing to let me get an exhaust clip on? Wanted to post it on the site database since nobody else has this setup.

daisuke149 · 07-26-2010, 08:24 PM

where in atlanta you live. I have a video camera we can use sometime on the weekend. Could use your help with some stuff with it too. i aint going to zcon so i'l be around. sat morning best for me.

'10Anamoly · 07-26-2010, 08:49 PM

Dai, I'm off of I-285 on Shallowford Rd (near spaghetti junction). I'm not going to ZCON either so we can shoot whatever we need to. Will PM you my number so we can catch up on Sat sometime.

daisuke149 · 07-26-2010, 11:04 PM

roger roger.

NewlyIMPORTed · 07-26-2010, 11:24 PM

yeah i def want to re dyno in the fall lol the heat and humidity kills numbers ill get my tune around christmas so we will see what happens then

daisuke149 · 07-26-2010, 11:26 PM

I just want to redyno at the same temp i had my baseline. which may not happen till september or something.

07-26-2010, 07:16 PM	#21 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 16	Anybody in ATL have a digital camcorder that they might be willing to let me get an exhaust clip on? Wanted to post it on the site database since nobody else has this setup. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

07-26-2010, 08:49 PM	#23 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 16	Dai, I'm off of I-285 on Shallowford Rd (near spaghetti junction). I'm not going to ZCON either so we can shoot whatever we need to. Will PM you my number so we can catch up on Sat sometime. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

07-26-2010, 11:24 PM	#25 (permalink)
NewlyIMPORTed A True Z Fanatic Join Date: May 2009 Location: Kennesaw, GA Posts: 1,109 Drives: 11 STI Sedan Rep Power: 18	yeah i def want to re dyno in the fall lol the heat and humidity kills numbers ill get my tune around christmas so we will see what happens then __________________ 2011 WRX STICobb Accessport, Nameless Performance exhaust, COBB SF Intake, COBB downpipe, 20% tint, Work Emotion XD9's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Will you dyno before and after mods?	m4a1mustang	Nissan 370Z General Discussions	23	06-20-2012 02:11 AM
Forged Performance - Dyno Day July 17th. $40.00 dyno, Free Food & Drinks	Tray@Forged	South East Region	42	07-28-2010 07:53 PM
QLD Z Dyno day	Ellz	Australia/New Zealand	3	04-01-2010 10:20 AM
DYNO Day	Nismo_370	North East Region	106	10-13-2009 01:43 PM

07-26-2010, 08:24 PM	#22 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	where in atlanta you live. I have a video camera we can use sometime on the weekend. Could use your help with some stuff with it too. i aint going to zcon so i'l be around. sat morning best for me.

07-26-2010, 11:04 PM	#24 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	roger roger.

07-26-2010, 11:26 PM	#26 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	I just want to redyno at the same temp i had my baseline. which may not happen till september or something.