Injen CAI windshield washer tank

Holliday · 07-05-2010, 05:19 PM

Hey all

I just finished installing my Injen intake last night. Everything went well but I just wanted to see what others thought about my findings.

I noticed that there was no hole to put the washer fluid level sensor. it looks like they were going to put a hole but never cut it out? Anyways, I went ahead and drilled a hole and fitted a new sensor I had laying around from my wife's Xterra. It went it with little modification and works great.

Did anyone else do this? If not, do have to deal with the low fluid light?

nixxer · 07-05-2010, 06:07 PM

Nope, I didnt do it. I thought about it, but chose not to. I had no light regarding it, so all is well if you dont. I do however have that sensor plug ziptied somewhere in there doing nothing though

m4a1mustang · 07-05-2010, 06:12 PM

I didn't think to do that during my install and have had no low fluid light. Isn't really a problem as I usually check fluid levels every other fill up.

Holliday · 07-05-2010, 06:27 PM

Sounds good to me!

I can't believe they did not go ahead and cut the hole. It looks like it was in the design?

Are there any issues with this intake that I should keep a look out for?

Thanks in advance

m4a1mustang · 07-05-2010, 06:42 PM

+1 rep for drilling the hole.

Trips · 07-05-2010, 06:50 PM

It does seem like a small over sight.

m4a1mustang · 07-05-2010, 06:52 PM

Well, at my next filter cleaning I think I'll drill the hole!

Trips · 07-05-2010, 06:54 PM

Quote:

Originally Posted by m4a1mustang

Well, at my next filter cleaning I think I'll drill the hole!

I'll keep this in mind also.

spearfish25 · 07-05-2010, 07:03 PM

Hmm, yet another sensor on our car that doesn't illuminate when a fluid level is low...

Trips · 07-05-2010, 07:08 PM

Quote:

Originally Posted by spearfish25

Hmm, yet another sensor on our car that doesn't illuminate when a fluid level is low...

Well, at least you won't Blow your Motor.

Holliday · 08-23-2010, 11:51 PM

so did anyone else go ahead and install the sensor?

AK370Z · 08-24-2010, 12:29 AM

Quote:

Originally Posted by spearfish25

Hmm, yet another sensor on our car that doesn't illuminate when a fluid level is low...

It actually does and it's fu*king annoying!

Quote:

Originally Posted by AK370Z

yup.. everytime you're low on windshield washer, you'll get this annoying message on your message center. It'll beep once to warn you and keep flashing the message every 5 seconds. On the other hand, if your TPMS goes off, you get a small tire icon on the side - NO warning or messages! So, thanks Nissan for getting the priorities right!

Holliday · 08-24-2010, 02:41 AM

cuttin it kinda close on that tank of gas huh AK! J/K

Trips · 08-24-2010, 02:52 AM

Quote:

Originally Posted by Holliday

cuttin it kinda close on that tank of gas huh AK! J/K

Hey, I wait till the last led's out to fill up.

Holliday · 08-24-2010, 03:12 AM

Quote:

Originally Posted by Triple's

Hey, I wait till the last led's out to fill up.

07-05-2010, 05:19 PM	#1 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	Injen CAI windshield washer tank Hey all I just finished installing my Injen intake last night. Everything went well but I just wanted to see what others thought about my findings. I noticed that there was no hole to put the washer fluid level sensor. it looks like they were going to put a hole but never cut it out? Anyways, I went ahead and drilled a hole and fitted a new sensor I had laying around from my wife's Xterra. It went it with little modification and works great. Did anyone else do this? If not, do have to deal with the low fluid light? __________________

07-05-2010, 06:07 PM	#2 (permalink)
nixxer Base Member Join Date: Jul 2009 Location: Hawaii Posts: 163 Drives: Black 370z 6MT Sp/T Rep Power: 16	Nope, I didnt do it. I thought about it, but chose not to. I had no light regarding it, so all is well if you dont. I do however have that sensor plug ziptied somewhere in there doing nothing though __________________ FI TDX 12" \| FI LTH \| Injen CAI \| UpRev \| Tuned by AMS www.project-definition.com

07-05-2010, 06:12 PM	#3 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	I didn't think to do that during my install and have had no low fluid light. Isn't really a problem as I usually check fluid levels every other fill up. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

07-05-2010, 06:27 PM	#4 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	! Sounds good to me! I can't believe they did not go ahead and cut the hole. It looks like it was in the design? Are there any issues with this intake that I should keep a look out for? Thanks in advance __________________

07-05-2010, 06:42 PM	#5 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	+1 rep for drilling the hole. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

07-05-2010, 06:50 PM	#6 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	It does seem like a small over sight. __________________

07-05-2010, 06:52 PM	#7 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Well, at my next filter cleaning I think I'll drill the hole! __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

07-05-2010, 07:03 PM	#9 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Hmm, yet another sensor on our car that doesn't illuminate when a fluid level is low... __________________ 2013 Cadillac V-Wagon, RIP Z

08-23-2010, 11:51 PM	#11 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	so did anyone else go ahead and install the sensor? __________________

08-24-2010, 02:41 AM	#13 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	cuttin it kinda close on that tank of gas huh AK! J/K __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Crush Washer?	NeedforZ	Nissan 370Z General Discussions	32	04-24-2017 01:11 PM
Oil Drain Plug Crush Washer-Stupid Question	rmorrow	Nissan 370Z General Discussions	4	07-09-2010 08:03 PM
Gas tank Location?	2004YZFR1	Nissan 370Z General Discussions	3	06-21-2010 01:26 AM
Gas Tank Door	shadyDR	Exterior & Interior	2	05-27-2010 06:55 PM
Don't go to the dealership for oil drain plug washer	YamahaR6	Nissan 370Z General Discussions	20	11-28-2009 01:50 PM