Cobb tubes and...

hfrog355 · 07-09-2010, 03:02 PM

Up Up Down Down Left Right Left Right A B Select Start

?

Quote:

Originally Posted by TBSS2008

Did you reset your ECU after installing the filters and the tubes? If not you should reset your ECU using the Manual Method below or just unplug your battery for a few minutes and plug it back in. Battery method will reset your trip and radio setting though. But I have not been able to successfully reset the ECU using the Manual Method its not easy.

Manual Method
Here is a quick way to reset your ECU. It is also known to clear codes thrown, and turn off the "Service Engine Soon" Light. It's a little tricky, but works.

1.Confirm that accelerator pedal is fully released, turn ignition ON switch and wait 3 seconds.
2.Repeat the following two procedures quickly five times within 5 seconds:
1.Fully depress the accelerator pedal (HARD).
2.Fully release the accelerator pedal.
3.Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking.
4.Fully release the accelerator pedal (while the CEL is still blinking)
5.Wait about 10 seconds.
6.Fully depress the accelerator pedal and keep it for more than 10 seconds.
7.Fully release the accelerator pedal (The CEL light will continue to blink).
8.Turn ignition switch to OFF position and now you can start the car. The CEL light should be gone.

'10Anamoly · 07-09-2010, 03:09 PM

Contra!

GZ3 · 07-09-2010, 03:15 PM

what color did you get? man i was reaaaly considering these till you said less tq...

'10Anamoly · 07-09-2010, 03:46 PM

Mine were black. Wasnt necessarily less torque, just less jumpy I guess. I like the quick kick. It seemed to pull a bit harder up top, middle was same, bottom was smoother I guess.

GZ3 · 07-09-2010, 04:07 PM

how much would you let them go for?

spearfish25 · 07-09-2010, 04:14 PM

Quote:

Originally Posted by hfrog355

Up Up Down Down Left Right Left Right A B Select Start

?

B-A, not A-B. Come on now...

GZ3 · 07-09-2010, 04:19 PM

Quote:

Originally Posted by spearfish25

B-A, not A-B. Come on now...

gooood catch! hahaha

'10Anamoly · 07-09-2010, 05:00 PM

$120 shipped and they are yours. I paid $125 + ship for them.

Chriz · 07-09-2010, 05:34 PM

Quote:

Originally Posted by '10Anamoly

Contra!

Not just Contra, every Konami game

GTLAW · 07-12-2010, 08:59 PM

Did you try the tubes with stock OEM filter? Also I think the cobbs are for there ECU updates.I would keep them wait to get full bolt on's and then get the cobb access port.

I can't see tubes taking away from HP :_(

J-BoneZ · 07-12-2010, 11:25 PM

I just installed the Cobb tubes last night with the stock air filters since I'm waiting for K&N filters, and in my opinion I think it might be a little bit more responsive. I didn't notice any loss in power, maybe I'll be able to tell a little more after the ECU adjusts.

07-09-2010, 03:09 PM	#32 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 16	Contra! __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

07-09-2010, 03:46 PM	#34 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 16	Mine were black. Wasnt necessarily less torque, just less jumpy I guess. I like the quick kick. It seemed to pull a bit harder up top, middle was same, bottom was smoother I guess. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

07-09-2010, 05:00 PM	#38 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 16	$120 shipped and they are yours. I paid $125 + ship for them. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

07-12-2010, 08:59 PM	#40 (permalink)
GTLAW Enthusiast Member Join Date: Jun 2010 Location: Columbia MD Posts: 373 Drives: Black ??? Rep Power: 15	Did you try the tubes with stock OEM filter? Also I think the cobbs are for there ECU updates.I would keep them wait to get full bolt on's and then get the cobb access port. I can't see tubes taking away from HP :_( __________________ 2013 6MT IPL GrSh\|V-Leds\|OSRAM \| SWIFT \| H&R \| CUSCO \| HKS \| 3M \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
COBB Tuning Motorsports Nissan 370Z, Trey Cobb Las Vegas Recap	COBB Tuning	Track / Autocross / Drifting / Dragstrip	2	05-04-2010 05:53 PM
MAF tubes?	SE	Intake/Exhaust	5	04-29-2010 03:36 PM
Ride with Trey Cobb and the COBB Tuning Motorsports 370Z around Buttonwillow!	COBB Tuning	Track / Autocross / Drifting / Dragstrip	0	04-08-2010 02:29 PM
intake tubes	black09Z	Wanted	1	03-26-2009 06:58 PM

07-09-2010, 03:15 PM	#33 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 22	what color did you get? man i was reaaaly considering these till you said less tq...

07-09-2010, 04:07 PM	#35 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 22	how much would you let them go for?

07-12-2010, 11:25 PM	#41 (permalink)
J-BoneZ Base Member Join Date: Mar 2010 Location: Tampa, FL Age: 41 Posts: 69 Drives: '11 Z W/Sport Pkg Rep Power: 15	I just installed the Cobb tubes last night with the stock air filters since I'm waiting for K&N filters, and in my opinion I think it might be a little bit more responsive. I didn't notice any loss in power, maybe I'll be able to tell a little more after the ECU adjusts.