370z TANABE EXHAUST and Y PIPE DYNO and VIDS

htt760 · 06-17-2010, 12:08 PM

Tanabe Touring Medallion Exhaust WITH Y PIPE

PURE STOCK 276 HP 222 TQ

TANABE EXHAUST ONLY – 285 HP 225 TQ ( + 9 hp and + 3 tq )

TANABE EXHAUST AND Y PIPE - 290 HP and 236 TQ ( + 14 hp and + 14 tq )

So after researching the many types of exhaust I pulled the gun on getting the Tanabe Exhaust. The below dyno chart shows the awesome gains from the exhaust comparing: STOCK TO TANABE EXHAUST, AND STOCK TO TANABE EXHAUST PLUS TANABE Y PIPE

I originally owned a 350z and went through the same dilemma where I had to determine which exhaust to get. After hearing the many types of exhaust, ALMOST NONE of the EXHAUST systems stayed true to the familiar and recognized factory Z exhaust sound. Plus if you decide to catless (resonated) or high flow cats, this Exhaust will not sound NASTY or even TOO Loud for DD.

My car is daily driven and when Tanabe took into account the Decibel levels and horsepower gains for one exhaust, I knew that they are really going to make an effort for a superior product.

- Quality
- Sound
- Performance

You guys won’t be disappointed, but once I can convert these videos the correct format I can post some videos.

MORE VIDEOS TO COME ( DRIVE BY, Launch, FLY BY )
Enjoy!!!

UPDATED:

This video shows the blips from 2500k rpm then second portion shows 4500k blips... then the flowing videos will describe themselves .. enjoy

This video is just for fun....enjoy

UFreefer · 06-17-2010, 12:39 PM

Awesome review and results!

I'm kind of surprised of how strong the results were only because when I swapped out the Tanabe Y-pipe only....I got almost no gains at all.
I dynoed 275hp stock
286 after HFC's (stock cbe)
and then 286 again after the Tanabe Y-pipe. (with rest of the exhaust stock)

htt760 · 06-17-2010, 01:17 PM

Freefer,

Heres the thing, how many pulls did you do? If it was the base 3 pulls... That for sure is not enough for the ECU to memorize and recalibrate the data from the driver input ( LEAD FOOT ).

The new ECU's now on the most cars map the fuel curve according to our driving style, therefore whenever you get ready to install new parts either run the car really really hard for about 7 to 10 pulls or do the same after the part is installed.

I have dynoed this car many many times from intakes and exhaust to see what the differences in airflow will do to maximize the learning trim on the computer.

Dont be discouraged just re dyno if you want to see results but for you to really feel the y pipe... any exhaust is much needed. The stock one works but it needs more flow ( Kinda like you running with one pair of shoes when you really need two!)

zZSoCalZz · 06-17-2010, 01:28 PM

How much did the exhaust and y pipe cost you?

UFreefer · 06-17-2010, 01:32 PM

Yeah I knew that going in there but didn't have time to do more then 3 pulls stock, 3 pulls after the HFC's and then 3 pulls after the Y-pipe....resetting the ecu each time.

I figure, I'll just bring the car back down the road and see if there is any difference.

Jordo! · 06-17-2010, 01:46 PM

Quote:

Originally Posted by zZSoCalZz

How much did the exhaust and y pipe cost you?

x2

LOU@AMPLIFIED · 06-17-2010, 07:23 PM

FYI:

Tanabe exhaust won't be available till mid August according to my sales rep there.

Midpipe and exhaust will be sold together and the Y PIPE is sold separately.

Retail price is $1390 for the exhaust and $540 for the Y pipe. Forum pricing will be availble soon

htt760 · 06-17-2010, 08:06 PM

Quote:

Originally Posted by zZSoCalZz

How much did the exhaust and y pipe cost you?

Quote:

Originally Posted by Jordo!

x2

Its a secret

... but talk to Lou.. He can def take care of you... he got me great pricing on alot of Z additions.

PL8MYRIDE.COM · 06-18-2010, 02:22 AM

Awesome results!!! I'm looking forward to more videos.

Boost_lee · 06-18-2010, 03:04 AM

Excellent review, thanks for adding this to the exhaust collection

Exhaust sounds VERY clean, very true to the Z sound.

Any plans for HFC's in the future?

zZSoCalZz · 06-18-2010, 09:48 AM

Lou please pm me pricing when available.

htt760 · 06-21-2010, 12:45 AM

Quote:

Originally Posted by PL8MYRIDE.COM

Awesome results!!! I'm looking forward to more videos.

Will do, Just got the HD camera today... starting to play with it and will post some within this month hopefully

Quote:

Originally Posted by Boost_lee

Excellent review, thanks for adding this to the exhaust collection

Exhaust sounds VERY clean, very true to the Z sound.

Any plans for HFC's in the future?

Your very welcome, you have to hear it in person... very Z sound with a nice rip up top and down low....

As for HFC's... yes but nothing soon... I know it will sound bi#ching though because Ive had a catless (resonated) tanabe on the 350 and it sounds awesome

Boost_lee · 06-21-2010, 01:10 AM

great! cant wait for pricing then.

HD vids are always encouraged

markymark · 06-23-2010, 07:17 AM

in for updates ^^

htt760 · 06-23-2010, 10:59 AM

Quote:

Originally Posted by Boost_lee

great! cant wait for pricing then.

HD vids are always encouraged

Boost, once the car gets back from the body shop... vids will be awesome.

Quote:

Originally Posted by markymark

in for updates ^^

keep posted marky ---

06-17-2010, 12:08 PM	#1 (permalink)
htt760 Base Member Join Date: May 2009 Location: Bonsall, CA (San Diego) Posts: 246 Drives: 2009 Base 370z Rep Power: 16	370z TANABE EXHAUST and Y PIPE DYNO and VIDS Tanabe Touring Medallion Exhaust WITH Y PIPE PURE STOCK 276 HP 222 TQ TANABE EXHAUST ONLY – 285 HP 225 TQ ( + 9 hp and + 3 tq ) TANABE EXHAUST AND Y PIPE - 290 HP and 236 TQ ( + 14 hp and + 14 tq ) So after researching the many types of exhaust I pulled the gun on getting the Tanabe Exhaust. The below dyno chart shows the awesome gains from the exhaust comparing: STOCK TO TANABE EXHAUST, AND STOCK TO TANABE EXHAUST PLUS TANABE Y PIPE I originally owned a 350z and went through the same dilemma where I had to determine which exhaust to get. After hearing the many types of exhaust, ALMOST NONE of the EXHAUST systems stayed true to the familiar and recognized factory Z exhaust sound. Plus if you decide to catless (resonated) or high flow cats, this Exhaust will not sound NASTY or even TOO Loud for DD. My car is daily driven and when Tanabe took into account the Decibel levels and horsepower gains for one exhaust, I knew that they are really going to make an effort for a superior product. - Quality - Sound - Performance You guys won’t be disappointed, but once I can convert these videos the correct format I can post some videos. MORE VIDEOS TO COME ( DRIVE BY, Launch, FLY BY ) Enjoy!!! UPDATED: This video shows the blips from 2500k rpm then second portion shows 4500k blips... then the flowing videos will describe themselves .. enjoy This video is just for fun....enjoy __________________ http://i39.photobucket.com/albums/e1...f/Huys3701.jpg Volks LE 37's 19x9.5 - 19x10.5 (+12 offset), Status Elite Intakes and Some fast Stickers Last edited by htt760; 07-16-2010 at 12:02 PM.

06-17-2010, 01:17 PM	#3 (permalink)
htt760 Base Member Join Date: May 2009 Location: Bonsall, CA (San Diego) Posts: 246 Drives: 2009 Base 370z Rep Power: 16	Freefer, Heres the thing, how many pulls did you do? If it was the base 3 pulls... That for sure is not enough for the ECU to memorize and recalibrate the data from the driver input ( LEAD FOOT ). The new ECU's now on the most cars map the fuel curve according to our driving style, therefore whenever you get ready to install new parts either run the car really really hard for about 7 to 10 pulls or do the same after the part is installed. I have dynoed this car many many times from intakes and exhaust to see what the differences in airflow will do to maximize the learning trim on the computer. Dont be discouraged just re dyno if you want to see results but for you to really feel the y pipe... any exhaust is much needed. The stock one works but it needs more flow ( Kinda like you running with one pair of shoes when you really need two!) __________________ http://i39.photobucket.com/albums/e1...f/Huys3701.jpg Volks LE 37's 19x9.5 - 19x10.5 (+12 offset), Status Elite Intakes and Some fast Stickers

06-17-2010, 01:28 PM	#4 (permalink)
zZSoCalZz Base Member Join Date: May 2010 Location: Los Angeles Posts: 176 Drives: in traffic! Rep Power: 15	How much did the exhaust and y pipe cost you? __________________ 2009 MB: Stillen G3 Intake // Customized illuminated kickplates frost blue Z //

06-18-2010, 09:48 AM	#11 (permalink)
zZSoCalZz Base Member Join Date: May 2010 Location: Los Angeles Posts: 176 Drives: in traffic! Rep Power: 15	Lou please pm me pricing when available. __________________ 2009 MB: Stillen G3 Intake // Customized illuminated kickplates frost blue Z //

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Injen Intakes Installed! Pics, Vids, Dyno	m4a1mustang	Intake/Exhaust	177	07-28-2017 06:35 PM
Amuse R1 Titan Extra STTI Exhaust - Review (pics/vids/dyno)	phelan	Intake/Exhaust	73	05-19-2017 05:49 PM
@@Tanabe Medalion Touring exhaust and Y-Pipe Released! Sound Clip Inside!@@	corner3garage	Exhaust/Intake	398	02-19-2015 05:43 PM
Tanabe Y-Pipe Nissan 370Z! INTENSEPOWER!	INTENSEPOWER	Exhaust/Intake	51	08-08-2011 01:40 PM
TANABE Racing Development Exhaust for 370Z: TANABE Medalion Touring Exhaust	AK370Z	Intake/Exhaust	13	03-23-2011 07:10 PM

06-17-2010, 12:39 PM	#2 (permalink)
UFreefer Base Member Join Date: Mar 2010 Location: Tampa Posts: 200 Drives: 09 Sport Touring Nav Rep Power: 15	Awesome review and results! I'm kind of surprised of how strong the results were only because when I swapped out the Tanabe Y-pipe only....I got almost no gains at all. I dynoed 275hp stock 286 after HFC's (stock cbe) and then 286 again after the Tanabe Y-pipe. (with rest of the exhaust stock)

06-17-2010, 01:32 PM	#5 (permalink)
UFreefer Base Member Join Date: Mar 2010 Location: Tampa Posts: 200 Drives: 09 Sport Touring Nav Rep Power: 15	Yeah I knew that going in there but didn't have time to do more then 3 pulls stock, 3 pulls after the HFC's and then 3 pulls after the Y-pipe....resetting the ecu each time. I figure, I'll just bring the car back down the road and see if there is any difference.

06-17-2010, 07:23 PM	#7 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	FYI: Tanabe exhaust won't be available till mid August according to my sales rep there. Midpipe and exhaust will be sold together and the Y PIPE is sold separately. Retail price is $1390 for the exhaust and $540 for the Y pipe. Forum pricing will be availble soon

06-18-2010, 02:22 AM	#9 (permalink)
PL8MYRIDE.COM Base Member Join Date: Dec 2008 Location: Melbourne - Australia Posts: 48 Drives: 2010 Black 370Z Rep Power: 17	Awesome results!!! I'm looking forward to more videos.

06-18-2010, 03:04 AM	#10 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	Excellent review, thanks for adding this to the exhaust collection Exhaust sounds VERY clean, very true to the Z sound. Any plans for HFC's in the future?

06-21-2010, 01:10 AM	#13 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	great! cant wait for pricing then. HD vids are always encouraged

06-23-2010, 07:17 AM	#14 (permalink)
markymark Base Member Join Date: Jul 2009 Location: Sydney Posts: 51 Drives: white 370z 6MT Rep Power: 16	in for updates ^^