Identify this part - rear Emission canister shield?

AK370Z · 06-15-2010, 12:55 AM

Well, I just randomly looked under the car today and found out that this metal cage is really close my exhaust canister. As a matter of fact, it's rubbing against my right exhaust canister!

So I send HKS USA an email and believe me or not, I got a reply within 2 hours from them! They basically reminded me of the rear emission canister shield and asked me to remove it. I'm just curious, is this it? The local exhaust shop that put my exhaust on, didn't tell me anything about removing this shield.

Currently my car /\

I'm just making sure that's okay to remove. Maybe HKS owners can chime in?

Jamaica · 06-15-2010, 12:58 AM

good question....

Trips · 06-15-2010, 01:34 AM

It's only a fuel line cover. Mine were removed for the FI install and the lines covered with heat resistant tape.

AK370Z · 06-15-2010, 01:38 AM

Quote:

Originally Posted by Triple's

It's only a fuel line cover. Mine were removed for the FI install and the lines covered with heat resistant tape.

Thanks. The guy who installed my exhaust was a total idiot. The whole time he was on the phone arguing with his gf

. He never looked at the instruction manual.

Trips · 06-15-2010, 01:42 AM

No Problem.

ducky · 06-15-2010, 03:41 AM

AK you should've told him to pay more attention to your bitch while he working on it, instead of arguing with his bitch..

AK370Z · 06-15-2010, 03:47 AM

Quote:

Originally Posted by ducky

AK you should've told him to pay more attention to your bitch while he working on it, instead of arguing with his bitch..

lol... well it was day 4 after getting my 4 wisdom teeth out. I was high on Hydrocodone. I even gave the guy $5 tip thinking he was gonna do a good job

.

vipor · 06-15-2010, 09:25 AM

$5 tip? Didn't know he was only parking your car.

Daishi · 06-15-2010, 11:03 AM

Yea if he looked at the instructions it says to remove that piece.. but most people dont look at instructions lol.

Raziman · 06-15-2010, 01:18 PM

Here is my picture before and after installed the HKS Hi Power.

Before

After

Raziman · 06-15-2010, 01:36 PM

I start wondering why there is no fuel cover on my factory Z. Its seems that its safe not to have it. You can see the steel cover stop the heat from flowing to my fuel line. Refer to the picture below.

sinceday1 · 06-15-2010, 03:50 PM

So all in all, that black piece AK pointed out is the "Emission canister shield"? and needs to be removed for a proper installation??

Thanks!

AK370Z · 06-15-2010, 04:51 PM

Quote:

Originally Posted by Raziman

Here is my picture before and after installed the HKS Hi Power.

Before

[IMG http://i985.photobucket.com/albums/ae338/Mrraziman/DSC00288.jpg[/IMG]

After

Thank you Raziman! I did get it taken out today.

Quote:

Originally Posted by sinceday1

So all in all, that black piece AK pointed out is the "Emission canister shield"? and needs to be removed for a proper installation??

Thanks!

YES and YES! It's held by three 10 mm bolts. I had the exhaust shop take it out. NO more rubbing.

m4a1mustang · 06-15-2010, 04:56 PM

So that's what it is. I was in my basement the other day cleaning up and saw that part laying on the floor. I was like, "wtf is this piece of sh1t?" It's been so long since I installed my exhaust!

Raziman · 06-15-2010, 05:29 PM

Cheers

06-15-2010, 12:55 AM	#1 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	Identify this part - rear Emission canister shield? Well, I just randomly looked under the car today and found out that this metal cage is really close my exhaust canister. As a matter of fact, it's rubbing against my right exhaust canister! So I send HKS USA an email and believe me or not, I got a reply within 2 hours from them! They basically reminded me of the rear emission canister shield and asked me to remove it. I'm just curious, is this it? The local exhaust shop that put my exhaust on, didn't tell me anything about removing this shield. Currently my car /\ I'm just making sure that's okay to remove. Maybe HKS owners can chime in? __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

06-15-2010, 01:34 AM	#3 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	It's only a fuel line cover. Mine were removed for the FI install and the lines covered with heat resistant tape. __________________

06-15-2010, 01:42 AM	#5 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	No Problem. __________________

06-15-2010, 09:25 AM	#8 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	$5 tip? Didn't know he was only parking your car. SwedeZ likes this. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

06-15-2010, 11:03 AM	#9 (permalink)
Daishi Track Member Join Date: Jul 2009 Location: NJ Posts: 683 Drives: 09 370z 6Speed Rep Power: 17	Yea if he looked at the instructions it says to remove that piece.. but most people dont look at instructions lol. SwedeZ likes this. __________________ Cobb Tuned \| Injen Intakes \| Fast Intentions Long Tube Headers \| Fast Intentions TDX Catback 18" Resonators CF Mufflers \| Tommy Kaira Hebi Bebi Shift Knob \| 19x9.5/19x10.5 Five Axis Design S5:F w/ 245/40/19 - 285/35/19 Hankook Ventus V12's

06-15-2010, 12:58 AM	#2 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	good question....

06-15-2010, 03:41 AM	#6 (permalink)
ducky Enthusiast Member Join Date: Aug 2009 Location: SinCity Posts: 437 Drives: 370z and s2000 Rep Power: 16	AK you should've told him to pay more attention to your bitch while he working on it, instead of arguing with his bitch..

06-15-2010, 01:18 PM	#10 (permalink)
Raziman Base Member Join Date: Apr 2010 Location: Brunei Darussalam Posts: 10 Drives: JeepSRT8/370z / 350z Rep Power: 15	Here is my picture before and after installed the HKS Hi Power. Before After __________________ Jeep SRT8 - Black 6.1L V8 Hemi (2010) 370z - Chicane Yellow 09 6MT 350z - Black 06 AT

06-15-2010, 01:36 PM	#11 (permalink)
Raziman Base Member Join Date: Apr 2010 Location: Brunei Darussalam Posts: 10 Drives: JeepSRT8/370z / 350z Rep Power: 15	I start wondering why there is no fuel cover on my factory Z. Its seems that its safe not to have it. You can see the steel cover stop the heat from flowing to my fuel line. Refer to the picture below. __________________ Jeep SRT8 - Black 6.1L V8 Hemi (2010) 370z - Chicane Yellow 09 6MT 350z - Black 06 AT Last edited by Raziman; 06-15-2010 at 01:41 PM.

06-15-2010, 03:50 PM	#12 (permalink)
sinceday1 Track Member Join Date: Oct 2009 Location: Canada Posts: 514 Drives: 09 Nissan 370Z M6 Rep Power: 17	So all in all, that black piece AK pointed out is the "Emission canister shield"? and needs to be removed for a proper installation?? Thanks!

06-15-2010, 04:56 PM	#14 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	So that's what it is. I was in my basement the other day cleaning up and saw that part laying on the floor. I was like, "wtf is this piece of sh1t?" It's been so long since I installed my exhaust! __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

06-15-2010, 05:29 PM	#15 (permalink)
Raziman Base Member Join Date: Apr 2010 Location: Brunei Darussalam Posts: 10 Drives: JeepSRT8/370z / 350z Rep Power: 15	Cheers __________________ Jeep SRT8 - Black 6.1L V8 Hemi (2010) 370z - Chicane Yellow 09 6MT 350z - Black 06 AT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New INVIDIA exhaust dual canister NO RASP. PROTOTYPE AVAILABLE SOON FROM AMPLIFIED	LOU@AMPLIFIED	Intake/Exhaust	177	10-12-2011 05:01 PM
Can You Identify That Car?!?!?!?!?!?	SgtGoldy	The Lounge (Off Topic)	139	11-02-2010 01:55 AM
370Z rear fog lamp ( Nissan Part # needed )	355890	Exterior & Interior	18	06-08-2010 05:06 PM
Factory rear view camera part number?	ducky	Exterior & Interior	2	02-06-2010 01:32 AM
Can Anyone Identify These Rims & the Sizes?	hey32g	Wheels & Tires	7	10-10-2009 04:08 PM