R2C, Stillen HFC & Stillen exhaust dyno pull

JvKintheUSA · 05-26-2010, 06:26 PM

Okay folks, I have a dyno pull scheduled for June 4th at Forged Performance., so we should finally see some numbers with the R2C intake. I will post the results as soon as I get them.

6/4/2010: I attached the results for my Dyno pull at Forged Performance today. As you can see, the results are 285.3 HP, which for an A/T is pretty good I was told. I know these numbers are meaningless for some, since we all want to know what each bolt-on adds, but ultimately the end result is what matters. The ambient temperature was 75F. Also, the pull was done in 4th gear - not sure if that matters or not. Next will be an ECU tune...

Chriz · 05-26-2010, 09:09 PM

Will you have a before and after?

RCZ · 05-26-2010, 09:17 PM

ooh in for this one. However, are you testing all of those together or just the r2c?

nogoodname · 05-26-2010, 09:18 PM

All the parts are installed already....

RCZ · 05-26-2010, 09:20 PM

well, so much for this thread then if everything is being tested at once...

Knives · 05-26-2010, 09:36 PM

Well, since all are installed already, have you had a dyno pull with just the stillen HFC and exhaust already? Otherwise it will be hard to tell what the R2C is contributing.

JvKintheUSA · 05-26-2010, 09:52 PM

Yes everything is already installed. SEMTEX did a dyno pull at Forged with just the Stillen CBE and a HFC and got about 292 HP, so I am using that as a baseline to see what the R2C is adding. I understand that weather and other factors influence the results, but at least it will be done on the same dyno. I guess the info will be useful for the folks that have the Stillen CBE and Stillen HFC installed and are mulling over what short intake to put in.

efuseakay · 05-26-2010, 11:21 PM

Still have the stock intakes? Bring them with.

fairladyZ34 · 05-27-2010, 12:44 AM

ur also an A7 so your gonna make a lil less power regardless

Chriz · 05-27-2010, 01:13 AM

So much for accurate results...

JvKintheUSA · 05-27-2010, 09:07 AM

Quote:

Originally Posted by Chriz

So much for accurate results...

Accuracy is relative...

JvKintheUSA · 05-27-2010, 09:26 AM

Quote:

Originally Posted by fairladyZ34

ur also an A7 so your gonna make a lil less power regardless

tbonesteak · 05-27-2010, 09:35 AM

Quote:

Originally Posted by JvKintheUSA

Accuracy is relative...

uhh how is accuracy relative?

JvKintheUSA · 05-27-2010, 09:45 AM

Quote:

Originally Posted by tbonesteak

uhh how is accuracy relative?

In the science of measuring things, "accuracy" refers to the difference between a measurement taken by a measuring tool and an actual value. For instance, a thermometer reading of 60 degrees Fahrenheit when the actual temperature is 62 degrees Fahrenheit is not totally accurate, though it is more accurate than a thermometer reading of 58 degrees Fahrenheit during that same time. The relative accuracy of a measurement can be expressed as a percentage; you might say that a thermometer is 98 percent accurate, or that it is accurate within 2 percent. So there you go.

m4a1mustang · 05-27-2010, 09:47 AM

Quote:

Originally Posted by JvKintheUSA

The A7's typically dyno a little lower than the 6MTs as they suck more power from the engine.

05-26-2010, 09:09 PM	#2 (permalink)
Chriz Track Member Join Date: Dec 2009 Location: Houston TX Posts: 626 Drives: '10 370z PW 7AT Rep Power: 17	Will you have a before and after? __________________ PW 7AT w/Sports Pkg Hook Em!

05-26-2010, 09:36 PM	#6 (permalink)
Knives Enthusiast Member Join Date: May 2009 Location: New York Posts: 293 Drives: 2009 370z 6MT Rep Power: 16	Well, since all are installed already, have you had a dyno pull with just the stillen HFC and exhaust already? Otherwise it will be hard to tell what the R2C is contributing. __________________ Mods list and pics Click

05-26-2010, 09:52 PM	#7 (permalink)
JvKintheUSA Enthusiast Member Join Date: Jun 2009 Location: Canton, GA Posts: 465 Drives: 2013 Shelby GT500 Rep Power: 428	Yes everything is already installed. SEMTEX did a dyno pull at Forged with just the Stillen CBE and a HFC and got about 292 HP, so I am using that as a baseline to see what the R2C is adding. I understand that weather and other factors influence the results, but at least it will be done on the same dyno. I guess the info will be useful for the folks that have the Stillen CBE and Stillen HFC installed and are mulling over what short intake to put in. __________________

05-27-2010, 12:44 AM	#9 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 19	ur also an A7 so your gonna make a lil less power regardless __________________ From Z to G to BMW and back to a G! Nismo for life

05-27-2010, 01:13 AM	#10 (permalink)
Chriz Track Member Join Date: Dec 2009 Location: Houston TX Posts: 626 Drives: '10 370z PW 7AT Rep Power: 17	So much for accurate results... __________________ PW 7AT w/Sports Pkg Hook Em!

05-26-2010, 09:17 PM	#3 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	ooh in for this one. However, are you testing all of those together or just the r2c?

05-26-2010, 09:18 PM	#4 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	All the parts are installed already....

05-26-2010, 09:20 PM	#5 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	well, so much for this thread then if everything is being tested at once...

05-26-2010, 11:21 PM	#8 (permalink)
efuseakay Enthusiast Member Join Date: Mar 2010 Location: The DAYNGA ZONE! Posts: 404 Drives: 2010 G37xS Sedan Rep Power: 15	Still have the stock intakes? Bring them with.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just did dyno with Stillen Intake and Nismo Exhaust	craniac24	Intake/Exhaust	11	04-11-2010 05:00 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 01:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 06:20 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 01:41 PM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 03:21 AM