My Stillen Exhaust looks wired...

holmanyu · 05-21-2010, 01:56 AM

I dont know why the tips are over shown..what can i do?

Trips · 05-21-2010, 02:01 AM

Have you tried talking to Stillen and providing pics for them to analyze what might of gone wrong? Either from a bad install or incorrect parts?

Cyberium · 05-21-2010, 02:04 AM

On the bright side... if someone rear-ends you, you'll exhaust will take the brunt of the damage =)

azn370z · 05-21-2010, 02:10 AM

I think that's how much the stillens tips stick out. It's pretty hard to install a cbe the wrong way. Which shop did the install?

Josh@STILLEN · 05-21-2010, 02:12 AM

It's just an alignment issue due to the installation. The exhaust can be adjusted (ultimate reason is unfortunately each 370Z is a little different, and we provide adjustment abilities in the exhaust to compensate), but the exhaust is not designed to have the tips protruding anywhere near that amount.

Please feel free to give customer service a call at (800) 891-1058 for additional information you can provide your installer.

holmanyu · 05-21-2010, 02:12 AM

Quote:

Originally Posted by Triple's

Have you tried talking to Stillen and providing pics for them to analyze what might of gone wrong? Either from a bad install or incorrect parts?

the body shop has already cut it... i will talk to stillen about the problem, and let the body shop to deal with it.

Trips · 05-21-2010, 02:14 AM

Thanks for stepping up Josh.

Josh@STILLEN · 05-21-2010, 02:19 AM

Quote:

Originally Posted by holmanyu

the body shop has already cut it... i will talk to stillen about the problem, and let the body shop to deal with it.

I'd hope that anyone reading this would always contact the manufacturer before making drastic steps such as cutting a bolt-in cat-back exhaust.. that being said, shops aren't always the first ones to call and check with the owner before making such drastic decisions.

Hoping this turns out for the best.. as you can see from another post there are a bunch of very happy people who have installed this exhaust, I hope we can determine the issue quickly and get it resolved..

Stillen exhaust has been installed, and the verdict is...

holmanyu · 05-21-2010, 02:26 AM

Quote:

Originally Posted by Josh@STILLEN

I'd hope that anyone reading this would always contact the manufacturer before making drastic steps such as cutting a bolt-in cat-back exhaust.. that being said, shops aren't always the first ones to call and check with the owner before making such drastic decisions.

Hoping this turns out for the best.. as you can see from another post there are a bunch of very happy people who have installed this exhaust, I hope we can determine the issue quickly and get it resolved..

Stillen exhaust has been installed, and the verdict is...

I will call you guys, and talk with the body shop, too.
I know I have to responsable about this, but because this is my first car, I know nothing about it. And i trust the body shop. I have learn a lesson, and I also hope things will turn out better.
Thanks for your reply, it helps alot !

azn370z · 05-21-2010, 02:32 AM

After you fix your exhaust issue bring your z to the next seattle z meet.

holmanyu · 05-21-2010, 02:36 AM

Quote:

Originally Posted by azn370z

After you fix your exhaust issue bring your z to the next seattle z meet.

Sure!! contact me if there is any meeting coming!!

holmanyu · 05-21-2010, 02:39 AM

Quote:

Originally Posted by azn370z

I think that's how much the stillens tips stick out. It's pretty hard to install a cbe the wrong way. Which shop did the install?

i forgot the name of the shop .. it is on highway 99 in lynnwood ...which body shop you usually go for??

azn370z · 05-21-2010, 03:04 AM

An exhaust is pretty easy to install so any shop can do the job. I installed mine myself but if i need work done I would take it to speedware but there are cheaper shops. I live near 99, around mukilteo.

Diocletian · 05-21-2010, 08:26 AM

Hah they look like a flowmaster kit that would be installed on a truck. That's AFTER you cut the exhaust(I can't believe you did that)!?

RCZ · 05-21-2010, 09:25 AM

Its probably a simple matter of going further into the slip joints.. should've been an easy fix without cutting..

05-21-2010, 01:56 AM	#1 (permalink)
holmanyu Base Member Join Date: May 2010 Location: Seattle Posts: 81 Drives: 09 Nissan 370Z AT7 Rep Power: 15	My Stillen Exhaust looks wired... I dont know why the tips are over shown..what can i do? Last edited by holmanyu; 06-24-2010 at 08:55 AM.

05-21-2010, 02:01 AM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Have you tried talking to Stillen and providing pics for them to analyze what might of gone wrong? Either from a bad install or incorrect parts? __________________

05-21-2010, 02:04 AM	#3 (permalink)
Cyberium Enthusiast Member Join Date: Mar 2009 Location: Vermont Posts: 379 Drives: 370z Touring \| Sport Rep Power: 16	On the bright side... if someone rear-ends you, you'll exhaust will take the brunt of the damage =) __________________ Stillen G3 Intakes \| F. I TDX

05-21-2010, 02:10 AM	#4 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	I think that's how much the stillens tips stick out. It's pretty hard to install a cbe the wrong way. Which shop did the install? __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

05-21-2010, 02:14 AM	#7 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Thanks for stepping up Josh. __________________

05-21-2010, 02:12 AM	#5 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	It's just an alignment issue due to the installation. The exhaust can be adjusted (ultimate reason is unfortunately each 370Z is a little different, and we provide adjustment abilities in the exhaust to compensate), but the exhaust is not designed to have the tips protruding anywhere near that amount. Please feel free to give customer service a call at (800) 891-1058 for additional information you can provide your installer.

05-21-2010, 02:32 AM	#10 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	After you fix your exhaust issue bring your z to the next seattle z meet. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

05-21-2010, 03:04 AM	#13 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	An exhaust is pretty easy to install so any shop can do the job. I installed mine myself but if i need work done I would take it to speedware but there are cheaper shops. I live near 99, around mukilteo. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

05-21-2010, 08:26 AM	#14 (permalink)
Diocletian Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 350 Drives: 09 370z CY A7 Rep Power: 15	Hah they look like a flowmaster kit that would be installed on a truck. That's AFTER you cut the exhaust(I can't believe you did that)!? __________________ Injen Dual CAI \| Illuminated Kick plates \| Stillen Sway bar kit \| F.I TDX w/ 12" Resonators \| F.I HFC's \| UpRev Tune \| 300HP/225tq Mustang Dyno

05-21-2010, 09:25 AM	#15 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Its probably a simple matter of going further into the slip joints.. should've been an easy fix without cutting..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hard wired V1 Radar detector power problem	tjlazer	Nissan 370Z General Discussions	7	01-29-2011 11:04 AM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 01:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 06:20 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 01:41 PM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 03:21 AM