More delays (Berk)

BOLIO 671 · 05-11-2010, 07:20 PM

Quote:

Originally Posted by Holliday

I have been waiting since the begging of February. They suck at updates that is for sure. Then when they send them out you don't want to know it cause it is just delayed again. I cant believe there are so many of us putting our selves through all this grief! Delays, shipping problems, constructions problems, and then...................................MORE DELAYS!

I better get a sweat fu%$in deal for this thing!!!

I received an email from M. Bonnani this morning...He explained that everytime they do adjustments, their supplier pushes them back two months....He stated that the last sample that Berks got wasn't fixed and was an oversight from their supplier, because it was a thing that was suppossed to be fixed the first time...However because Berks sent the sample back to the supplier it pushed the date to July....According to Mike if the sample from their supplier comes in right, then they will meet the July deadline, but its not 100% guaranteed...He stated that if their supplier sends in a sample that needs more adjustments, then more than likely it will be pushed back another two months until September...

I'm calling Berks rights now to get confirmation on this...Keep the rest of you posted.

Trips · 05-11-2010, 07:22 PM

Very sorry to hear about the delays!!

at least with FI alternative your name gets put on a list in the FI thread and you can Monitor the Progress and count the days before it comes in. Just a thought...

BOLIO 671 · 05-11-2010, 08:26 PM

Alryt guys...Spoke to Bryan this morning...He too could not give me a 100% guarantee that the exhausts will be in on by July....He pretty much covered the explaination given by Mike...Bryan stated that the last sample that was given to Berks by the shipper was off alignment by a few millimeters...He stated that if you really didn't look at it, it wouldn't catch your eye unless someone pointed it out to you...Bryan further explained that although BERKS has had to deal with these delays, he chose to ship it back to his supplier to get the sample done right because he/BERKS does not want to give us a half @$$ jacked up product...Because the sample was sent back, it pushed production back 2 months...

Bottom line is wanting a perfect product is what is causing the delays...the sample should come back in July with the expected corrections, but if not and its sent back then it will be pushed back to September...

Justin1686 · 05-11-2010, 10:27 PM

ugh, this is terrible. i was gonna place my order into Berk tomorrow. But i'm glad to hear that they're making sure everything is perfect. If my exhaust didnt fit exactly as it should, I WOULD notice it., and it'd bother the heck out of me. thanks for the info.

Quote:

Originally Posted by BOLIO 671

Alryt guys...Spoke to Bryan this morning...He too could not give me a 100% guarantee that the exhausts will be in on by July....He pretty much covered the explaination given by Mike...Bryan stated that the last sample that was given to Berks by the shipper was off alignment by a few millimeters...He stated that if you really didn't look at it, it wouldn't catch your eye unless someone pointed it out to you...Bryan further explained that although BERKS has had to deal with these delays, he chose to ship it back to his supplier to get the sample done right because he/BERKS does not want to give us a half @$$ jacked up product...Because the sample was sent back, it pushed production back 2 months...

Bottom line is wanting a perfect product is what is causing the delays...the sample should come back in July with the expected corrections, but if not and its sent back then it will be pushed back to September...

m4a1mustang · 05-11-2010, 10:53 PM

Quote:

Originally Posted by BOLIO 671

Alryt guys...Spoke to Bryan this morning...He too could not give me a 100% guarantee that the exhausts will be in on by July....He pretty much covered the explaination given by Mike...Bryan stated that the last sample that was given to Berks by the shipper was off alignment by a few millimeters...He stated that if you really didn't look at it, it wouldn't catch your eye unless someone pointed it out to you...Bryan further explained that although BERKS has had to deal with these delays, he chose to ship it back to his supplier to get the sample done right because he/BERKS does not want to give us a half @$$ jacked up product...Because the sample was sent back, it pushed production back 2 months...

Bottom line is wanting a perfect product is what is causing the delays...the sample should come back in July with the expected corrections, but if not and its sent back then it will be pushed back to September...

That blows.

labk888 · 05-11-2010, 11:13 PM

I would take my money elsewhere. I feel bad for everyone who has been waiting patiently but there is a time limit for patience.

esfourteen · 05-12-2010, 12:19 AM

I was set on berk until i learned about the delays, ordered the invidia gemini instead. Good luck to everyone who's patiently waiting.

Holliday · 05-12-2010, 03:34 AM

Quote:

Originally Posted by esfourteen

I was set on berk until i learned about the delays, ordered the invidia gemini instead. Good luck to everyone who's patiently waiting.

I was thinking if I backed out of this exhaust, that would be my next choice. You should post up some reviews when you get it and after install.

Dembflyr · 05-12-2010, 07:49 AM

I am glad they want it to be perfect. That is why I am staying with them. I have no problem with a company that wants to take the time to fix a quality issue.

It seems like Berk is getting shafted by their supplier.

What I'd like to know is why, if this is a problem with their supplier, doesn't Berk push them the make it right by making them fix the problem and put Berk back at the front of the production? It seems to me that Berk is their customer and should be taken care of.

Am I missing something here? Or is there more to this?

BOLIO 671 · 05-12-2010, 08:40 AM

Quote:

Originally Posted by Dembflyr

I am glad they want it to be perfect. That is why I am staying with them. I have no problem with a company that wants to take the time to fix a quality issue.

It seems like Berk is getting shafted by their supplier.

What I'd like to know is why, if this is a problem with their supplier, doesn't Berk push them the make it right by making them fix the problem and put Berk back at the front of the production? It seems to me that Berk is their customer and should be taken care of.

Am I missing something here? Or is there more to this?

There's probably more to this than we know...The only thing that I can assume is that Berks is getting a very sweet low deal from their supplier, and may be out on a limb...We all know how that goes...When you hook up with a good friend that is giving you a sweet deal, it can be a little embarassing to go off on your friend...if that example makes any sense..

The only thing that I was confused about was the suppliers that are working on the exhaust are the same suppliers that worked on the first batch of exhausts...That means that they should have had a prototype sample in place already...I questioned Bryan about this, and his explaination was that with the first batch, Berks did all the assembly and fitting at their shop in house...He stated that in this particular batch that Berks opted their shipper to take care of the production and assembly so that when the final product is done it would just be given to Berk for them to box and ship out right away..

esfourteen · 05-12-2010, 10:26 AM

Quote:

Originally Posted by Holliday

I was thinking if I backed out of this exhaust, that would be my next choice. You should post up some reviews when you get it and after install.

unfortunately my car was rear ended, so the exhaust wont be going on until it gets out of the shop

BOLIO 671 · 05-12-2010, 10:29 AM

Quote:

Originally Posted by esfourteen

unfortunately my car was rear ended, so the exhaust wont be going on until it gets out of the shop

wow! Bad trip...feel for you and hope all goes well

370Zsteve · 05-12-2010, 10:31 AM

Not one post from Berk in this thread is disturbing.

craniac24 · 05-12-2010, 10:34 AM

Quote:

Originally Posted by 370Zsteve

Not one post from Berk in this thread is disturbing.

I agree. Stories like this usually end very badly.

BOLIO 671 · 05-12-2010, 10:39 AM

I know right? But even if they did post somethin it would just reiterate all the updates we have been posting to keep each other informed...I'm goin on my 3rd month waitin...I really feel for those who ordered in January and February...I can only imagine how they're feelin

05-11-2010, 07:22 PM	#32 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Very sorry to hear about the delays!! at least with FI alternative your name gets put on a list in the FI thread and you can Monitor the Progress and count the days before it comes in. Just a thought... __________________

05-11-2010, 08:26 PM	#33 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Alryt guys...Spoke to Bryan this morning...He too could not give me a 100% guarantee that the exhausts will be in on by July....He pretty much covered the explaination given by Mike...Bryan stated that the last sample that was given to Berks by the shipper was off alignment by a few millimeters...He stated that if you really didn't look at it, it wouldn't catch your eye unless someone pointed it out to you...Bryan further explained that although BERKS has had to deal with these delays, he chose to ship it back to his supplier to get the sample done right because he/BERKS does not want to give us a half @$$ jacked up product...Because the sample was sent back, it pushed production back 2 months... Bottom line is wanting a perfect product is what is causing the delays...the sample should come back in July with the expected corrections, but if not and its sent back then it will be pushed back to September... __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

05-11-2010, 11:13 PM	#36 (permalink)
labk888 Base Member Join Date: Dec 2008 Location: Big D Posts: 233 Drives: '10 370Z PW 6MT T&S Rep Power: 532	I would take my money elsewhere. I feel bad for everyone who has been waiting patiently but there is a time limit for patience. __________________ LABK 10' 370Z/PW/6MT/Touring Sport/Illum. Kicks/Ventureshield Ultra/F1 Pinnacle 15% Tint/PLX KIWI

05-12-2010, 07:49 AM	#39 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	I am glad they want it to be perfect. That is why I am staying with them. I have no problem with a company that wants to take the time to fix a quality issue. It seems like Berk is getting shafted by their supplier. What I'd like to know is why, if this is a problem with their supplier, doesn't Berk push them the make it right by making them fix the problem and put Berk back at the front of the production? It seems to me that Berk is their customer and should be taken care of. Am I missing something here? Or is there more to this? __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

05-12-2010, 10:31 AM	#43 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 43	Not one post from Berk in this thread is disturbing. __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

05-12-2010, 12:19 AM	#37 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	I was set on berk until i learned about the delays, ordered the invidia gemini instead. Good luck to everyone who's patiently waiting.

05-12-2010, 10:39 AM	#45 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	I know right? But even if they did post somethin it would just reiterate all the updates we have been posting to keep each other informed...I'm goin on my 3rd month waitin...I really feel for those who ordered in January and February...I can only imagine how they're feelin __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Berk hfc/berk cbe vs berk hfc/stillen exhaust	xbigb4ller69z	Intake/Exhaust	21	04-11-2010 04:35 AM
Fs- berk nfc	racerxj17	Parts for sale (Private Classifieds)	8	11-22-2009 08:59 PM
Berk hfc	B1nks	Parts for sale (Private Classifieds)	9	09-28-2009 09:31 PM
Berk HFC or Berk Test Pipes?	bobby8621	Intake/Exhaust	16	06-24-2009 06:48 PM
Redline Time Attack Results are in! DDM 370Z, BERK S2000 & BERK BMW 135i on track!	BerkTech	Track / Autocross / Drifting / Dragstrip	8	04-02-2009 12:37 PM